Tannoy CMS 601 DC BM User manual

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
The Tannoy CMS601 DC is a full bandwidth; high power and high sensitivity ceiling monitor
system. The 165mm (6.50") Tannoy Dual ConcentricTM is a point source drive unit design
comprising a multi fibre paper pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium
dome HF unit with neodymium magnet system. The driver and passive frequency dividing
network are mounted in a vented, injection moulded, paintable front baffle manufactured from
UV/weather resistant UL94V-0 ABS material.
The mid-bass and tweeter sections of the Tannoy Dual ConcentricTM constant directivity driver
are coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for
optimum coverage; this while avoiding the massive loss of energy in the vertical plane, at the
crossover frequency, inherent in two-way discreet designs. This high power and high sensitivity
design, with extended frequency response and very low distortion, is equipped with dynamic high
frequency protection.
This compact unit is specifically designed for applications requiring the combination of premium
sonic quality for music and speech reinforcement and exceptional reliability and intelligibility.
The CMS601 DC BM is equipped with a low insertion loss 60W line transformer easily
configurable to the following settings via front baffle mounted rotary tapping switch:
70V systems: 60W / 30W / 15W / 7.5W / OFF & low Impedance operation
100V systems: 60W / 30W / 15W / OFF & low Impedance operation
The CMS601 DC PI is supplied without a transformer. The 60W line transformer is available as
an optional accessory pack (7600 1658) for easy connection to the control switch circuit if the
product is to be used without a back can.
The recommended option for optimum performance and compliance with safety ratings is to use
the CMS601 PI Back Can (8001 4520) in which the transformer is pre-fitted.
Two CMS601 DC model versions and a separate back can are available to satisfy the vast
majority of installation application requirements:
CMS601 DC BM (Blind Mount) - supplied with an integral back can.
CMS601 DC I ( re-Install) - supplied without a back can.
CMS601 I Back Can ( re-wire back can) - use with the CMS601 DC I.
The zinc plated steel back cans have an integrated, recessed termination box. The removable
locking connector has screw terminals for secure wire termination and "loop through" facility.
Strain relief is provided by a clamping mechanism for use with plenum rated cable or conduit.
Spring loaded self-aligning clamps make for quick and easy installation, while all models are also
supplied with two tile support rails and one C-ring included in the package.
A plaster (mud) ring is available as an optional accessory.
roduct Description
• 165mm (6.50") point source Dual ConcentricTM driver
• High power & high sensitivity with extended frequency
response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage.
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discreet designs
• UV/weather resistant UL94V-0 ABS front baffle
• Blind Mount & Pre Install options
• Dynamic high frequency protection
• Easily accessible tapping switch on front baffle.
• Low insertion loss 60W line transformer
• Ferrofluid cooled neodymium HF
• Packaged with tile rails and C-ring for quick & easy
installation and simple stocking logistics
• Five year warranty
• Multi-zone foreground music & paging systems
• Boardrooms and offices
• Business music systems
• Airports, convention centres, hotels
• Reception and waiting rooms
• Houses of worship
• Retail outlets and shopping malls
• Lounges and bars
• Cruise ships
• Courtrooms
Features
Applications

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
TECHNICAL S ECIFICATIONS
Frequency Response (-3dB) (1) 75Hz - 30kHz
BM Back can
Frequency Range (-10dB) (1) 50Hz - 30kHz
BM Back can
Frequency Range (-10dB) (1) 46Hz - 30kHz
PI Back can
System Sensitivity (1W @1m) (2) 91dB (1W = 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 111 degrees conical
Directivity Factor (Q) 4.7 averaged 1kHz to 6kHz
Directivity Index (DI) 6.5 averaged 1kHz to 6kHz
Rated Maximum S L (2)
Average 110dB
Peak 116dB
ower Handling
Average 80W
Programme 160W
Peak 320W
Recommended Amplifier ower 160W @ 8 Ohms
Nominal Impedance 8 Ohms
Transformer Taps (via front rotary switch)
70V 60W / 30W / 15W / 7.5W / OFF &
low impedance operation
100V 60W / 30W / 15W / OFF &
low impedance operation
Distortion
10% Full ower 2nd Harmonic 3rd Harmonic
250Hz 1% 0.32%
1kHz 0.18% 0.32%
10kHz 1% 0.18%
1% Full ower 2nd Harmonic 3rd Harmonic
250Hz 0.25% 0.25%
1kHz 0.06% 0.18%
10kHz 0.45% 0.14%
Crossover
2kHz - 2nd order LF, 3rd order HF
(with dynamic HF protection)
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
(3) Long term power handling capacity as defined in EIA - 426B test
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
System CMS601 DC Transducers
8001 4530 CMS601 DC BM White / paintable 2
8001 4540 CMS601 DC PI White / paintable 2
8001 4181 CMS601 DC Plaster (Mud) Ring Zinc plated steel 10
8001 4590 CMS601 DC PI 8ohm back can Zinc plated steel 1
7600 1658 CMS601 DC 60W transformer kit 8 ohm N/A 1
ART NUMBER ACKED QUANTITYBAFFLE / GRILLE COLOURMODEL NAME
Ordering Information
Low Frequency 1 x 165mm (6.50") Dual Concentric™
constant directivity point source driver with
multi fibre paper pulp cone
High Frequency 1 x 25mm (1.00") titanium dome with
neodymium magnet system
hysical
Enclosure
Back can Zinc plated steel
Baffle Reflex loaded UL 94V-0 rated ABS
rille Steel, with weather resistant coating
Safety Features Safety ring located at rear of enclosure
for load bearing safety bond
Clamping Design Security toggle clamp
Min / Max Clamping Range 0.0mm (0.0") / 20.0mm (0.79")
Recommended Clamp Torque 1.5Nm
Back Can Options
Blind Mount (BM) Complete with fixed back can
Pre Install (PI) Separate back can for pre installation
Cable Entry Options Cable clamp and squeeze connector for
conduit up to 22mm
Conduit Knockouts 3 Sets of horizontal positions
19 / 22 / 28mm (0.75" / 0.87" / 1.10")
Connectors Removable locking connector with screw
terminals with "loop through" facility
Safety Agency Ratings (pending) UL-1480, UL-2043, CE
BM Hole Cutout Diameter 253mm (9.96")
I Hole Cutout Diameter 253mm (9.96")
Dimensions
Bezel diameter 280mm (11.02")
Front of ceiling to
rear of back can (BM) 258mm (10.16")
Front of ceiling to
top of safety loop (BM) 275.5mm (10.84")
Front of ceiling surface to
rear of speaker unit (PI) 99.40mm (3.91")
Front of accessory back can
bezel to top of safety loop (PI) 168.50mm (6.60")
Net Weight (ea)
CMS601 DC BM 7.45kg (16.42lbs)
CMS601 DC I 4.09kg (9.02lbs)
CMS601 DC I back can 3.685kg (8.12lbs)
Included Accessories C Ring, tile bridge, paint mask,
cutout template, grille
Optional Accessories Plaster (Mud) Ring

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
ERFORMANCE MEASUREMENTS
DI
1
10
100
100 1000 10000
0
30
60
90
120
150
180
210
240
270
300
330
360
100 1000 10000
Degrees
50
60
70
80
90
100
10 100 1000 10000 100000
50
60
70
80
90
100
10 100 1000 10000 100000
0
10
20
30
40
50
60
110 100 100
0
1000
0
10000
0
DI
0 deg
10 deg
20deg
30deg
40deg
ANECHOIC
FREQUENCY
RES ONSE
IM EDANCE
DIRECTIVITY
INDEX
1m on-axis frequency response
frequency (Hz)
frequency (Hz)
Impedance vs frequency
frequency (Hz)
Impedance (ohms)
Level (dB)
Horizontal off-axis response
OFF AXIS RES ONSE
BEAMWIDTH
frequency (Hz)
frequency (Hz)
Horizontal off-axis response

-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
ERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
125 Hz
160 Hz
200 Hz
250 Hz
315 Hz
400 Hz
500 Hz
630 Hz
800 Hz
1 kHz
1.25 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
4 kHz
5 kHz
6.3 kHz
8 kHz
10 kHz
12.5 kHz
16 kHz
20 kHz
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
630 Hz
800 Hz
1 kHz
1.25 kHz

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
DIMENSIONAL SKETCHES
TEMPLATE HOLE CUTOUT SIZE - 253mm (9.97")
CMS601 DC BM
5.00
[0.20"]
258.00
[10.16"]
275.50
[10.90"] 244.30
[9.62"]
280.00
[11.02"]
99.40
[3.91"]
5.00
[0.20"]
280.00
[11.02"]
TEMPLATE HOLE CUTOUT SIZE - 253mm (9.97")
CMS601 DC PI
244.30
[9.62"]
8001 4530 CMS601 DC BM White / paintable 2
8001 4540 CMS601 DC PI White / paintable 2
8001 4181 CMS601 DC Plaster (Mud) Ring Zinc plated steel 10
8001 4590 CMS601 DC PI 8ohm back can Zinc plated steel 1
7600 1658 CMS601 DC 60W transformer kit 8 ohm N/A 1
ACKED QUANTITYBAFFLE / GRILLE COLOURMODEL NAMEART NUMBER
Ordering Information

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
DIMENSIONAL SKETCHES
CMS601 PI BACK CAN
The PI back can accepts direct
connection to installed conduit in two
ways using squeeze connectors:
Any of the three knock-out points at the
side 19mm / 22mm / 28mm
(0.75"/ 0.87"/ 1.10")
1
2
22mm (0.87) via the clamp location at
the rear after first removing cable clamp
OPTIONAL ACCESSORIES
PLASTER (MUD) RING
60.00
[2.36]
180.00 [7.09"]
205.00 [8.07"]
230.00 [9.06"]
255.00 [10.04"]
280.00 [11.02"]
305.00 [12.01"]
650.00 [25.59"]
10.00
[0.39"]
251.00 [9.88"]
318.00 [12.52"]
251.00
[9.88"]
351.00
[13.82"]
80.00
[3.15"]
184.50 [7.26" 184.50 [7.26"]
27.00
[1.06"]
15.00
[0.59"]
16.00 [0.63"] 4.50 [0.18"]
522.00 [20.55"]
81.00
[3.19"]
360.00 [14.17"]
15.00 [0.59"]
635.00 [25.00"]
15.00 [0.59"]
25 POSITIONS
SUPPLIED ACCESSORIES
C-RING
TILE BRIDGE
249.4
[9.82"]
168.5
[6.63"]
8.8
[0.35"] 151.2
[5.95"]
319.0
[12.56"]
351.0
[13.82"]

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
The Ceiling Monitor System shall consist of a 165mm (6.50") full range, point source, constant directivity Dual ConcentricTM transducer and passive fre-
quency dividing network mounted in a vented, injection moulded, paintable front baffle in UL94V-0 ABS material.
The back can in both PI (pre-install) & BM (blind-mount variants) shall be constructed of zinc plated steel. A recessed termination box shall be integrated with
the back can, a removable locking connector with screw terminals for secure wire termination with "loop through" facility shall be provided. Strain relief will be
provided by a clamping mechanism for use with plenum rated cable or conduit.
For prewiring the PI (pre-install) back can is provided with conduit knockouts (19mm / 22mm / 28mm, 0.75" / 0.87" / 1.14"). A safety ring is located on the
rear of the back can for a load bearing safety bond.
Performance of the Ceiling Monitor System shall meet or exceed the following criteria: The system shall have a conical coverage pattern of 111degrees
(1kHz to 6kHz). Frequency response measured on axis shall be 50Hz - 30kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic
chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling capacity as defined in EIA-426B test shall be 80W,
recommended amplifier power 160W. Dynamic high frequency protection is provided for occasional overpowering. The nominal system impedance shall be
8 Ohms (in low impedance setting).
The Ceiling Monitor System shall be equipped with a 60W high performance line transformer for use in 70.7 or 100 Volt distributed audio systems with 60,
30, 15, 7.5* Watt taps available. An easily accessible rotary switch located on the front baffle shall be available for selecting transformer and low impedance
settings. A weather resistant perforated steel grille covers the transducer and switch.
Two support rails and one C-Ring shall be included with the ceiling monitor system.
Bezel diameter 280mm (11.02")
BM Front of ceiling to rear of back can 258mm (10.16"), Front of ceiling to top of safety loop 275.5mm (10.84")
PI Front of ceiling surface to rear of speaker unit 99.40mm (3.91"), Front of accessory back can bezel to top of safety loop 168.50mm (6.60")
The Ceiling Monitor System shall be the...CMS601 DC.
*70 Volt only
Architectural specifications

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
NOTES

Tannoy Un ted K ngdom
Tannoy North Amer ca
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 [phone]
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enqu r [email protected]
E: nqu r [email protected]
E: [email protected]
E: [email protected]
CMS601 DC
Tannoy adopts a policy of continuous improvement and product specification is subject to change CMS601 DC data file // issue 1.06 // 10.01.08
NOTES