Tapp Tapplock lite User manual

Tapplock lite
User Manual
Tapplock.com
World’s first smart fingerprint padlock

2
•Unlocks in 0.8 seconds
•Stores up to 100 fingerprints
• Adaptive algorithm: faster and more
accurate access each time you use it
Cutting-edge fingerprint technology
•Supports wireless Bluetooth access via
the Tapplock app
•Share & control access remotely to
unlimited users
•View access history with time and
location
Shareable wireless access

3
•Up to 8-month battery life per 2-hour
charge time
• Check remaining power using the
Tapplock app
Rechargeable battery
Morse code backup access
•Set up Morse code access using the
Tapplock app
• Access the Tapplock using the power
button in case a user's fingerprint isn't
enrolled and / or access to a smartphone
is unavailable

4
Overview
Power
button
Fingerprint
sensor
Charge port
FRONT VIEW
BOTTOM VIEW
Status
indicator

5
Quick Start
Download the
Tapplock app on
the App Store or
Google Play.
Make sure Bluetooth is
enabled in your phone
settings before setting up
the Tapplock.
Register / log in on the Tapplock app and
follow instructions to set up your new
Tapplock.
2
1

6
Status Indicator
The status indicator is the visual cue to
understanding your Tapplock lite.
Refer to the table to understand what each
colour means.
Press down on the Tapplock shackle to enter an unlocking mode

7
Green
White
White
Yellow
Red
Green
Green
Green
Green
Red
Red
Red*
Red*
Red*
Blue*
Blue
Blue
Blue*
Green
Purple
StatusMode
Morse Code
Bluetooth
Fingerprint
Lock Successful
Function/Action
Correct Morse code
Incorrect Morse code
Lock is unlocked
Connected
Searching
Press power button 2x
Fingerprint rejected
Unlock via Bluetooth
Upgrading firmware
Press power button 3x
Long press
Short press
Locking successful
Charging
Fully charged
Battery at 30%
Battery at 20%
Battery at 10%
Fingerprint accepted
Press power button 1x
LED Color
Lock Notification
Charging
Low Battery
Notification
* indicates LED will be blinking

8
3 ways to unlock
Tapplock lite is equipped with multiple access
capabilities to allow for maximum convenience
and flexibility.
Fingerprint access: Unlock in 0.8 seconds
Bluetooth access: Bluetooth access via the
Tapplock app using your smartphone
Morse code access: Backup access using
long-short combinations by pressing on the
power button shackle

Fingerprint Mode
9
To turn on Tapplock lite, press down on the shackle
once (1) of the lock (power button).The status
indicator light will be white, and your Tapplock
should be ready to unlock with your registered
fingerprint.
If you are having trouble getting to fingerprint
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press down on the power button once
(1) to enter fingerprint mode.
** Tapplock lite will automatically enter sleep
mode after 10 seconds of inactivity. This
increases the lifespan of your battery.

10
Bluetooth Mode
Connect your phone using Bluetooth mode to:
• Add a new Tapplock to your account
• Unlock with your phone
• Set up / remove fingerprints
•Set up Morse code
Press down on the shackle of the lock (power
button) twice (2) to enter Bluetooth mode for phone
pairing. The status indicator light will be blue.
If you are having trouble getting to Bluetooth mode,
hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press down on the power button twice
(2) to enter Bluetooth mode.

11
Morse code Mode
Morse code is a backup access mode. It allows you
to unlock your device using long / short
combinations by pressing down on the shackle of
the lock (power button). Morse code gives you
access to your Tapplock without your fingerprint or
your phone.
Follow the on-screen instruction in the Tapplock app
to set up your custom Morse code. The status
indicator will be white for a long hold. The status
indicator will be blue for a short hold.
Press down on the power button three (3) times to
enter Morse code mode. The status indicator light
will be purple.
If you are having trouble getting to Morse code
mode, hold down the power button until the status
indicator light turns off, putting your lock in sleep
mode. Then press the power button three (3) times
until the status indicator light turns purple.

12
FCC notice
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.

14
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without
restriction.
Visit Tapplock.com for
newest updates, instructions and FAQ.
Contact us by emailing:[email protected]

Copyright © Tapplock Corp.