Targus USB 3.0 PCIe Card - ATX Powered
6
Targus USB 3.0 PCIe Card - ATX Powered
7
• Compliant with Universal Serial Bus 3.0 Specication Revision 1.0
• Supports the following speed data rate as follows; Low-speed (1.5 Mbps)/
Full-speed (12 Mbps)/ High-speed (480 Mbps)/ Super-speed (5 Gbps).
• Supports2downstream ports foralllevels of speed.
• SupportsallUSB compliant datatransfertype; Control/ Bulk/Interrupt/
Isochronoustransfer.
• CompliantwithPCI Express® Base Specication 2.0.
• SupportsPCIExpress®Card Electromechanical Specication Revision 2.0.
• Supports PCI Bus Power Management Interface Specication Revision 1.2.
• Supportspowereach port upto900 mA.
Specication
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesiredoperation.
Technical Support
For technical questions, please visit:
Product Registration
Targus recommends that you register your Targus accessory shortly after purchasing
it.Go to:
http://www.targus.com/registration.asp
You will need to provide your full name, email address, country of residence and product
information.
Warranty
Targus warrants this product to be free from defects in materials and workmanship
for one year. If your Targus accessory is found to be defective within that time, we will
promptly repair or replace it. This warranty does not cover accidental damage, wear
and tear, or consequential or incidental loss. Under no conditions is Targus liable for
loss of, or damage to devices; nor loss of, or damage to, programs, records, or data; nor
any consequential or incidental damages, even if Targus has been informed of their
possibility. This warranty does not affect your statutory rights.
US Internet:www.targus.com/support.asp
Australia Internet:www.targus.com/au
Telephone: 1800-641-645
New Zealand Telephone: 0800-633-222
