Tarot T-2D User manual

T-2DBrushless Gibmal AdditionalRemarks2013-6-28
Controllerinterface and connection introdution
1.Gimbalcontrollerconnector ViaUSBmodule connected to thecomputer.When you use this
USBModule atfirst time , please intall itsdirver.
2.Motordriverconnector:ViaUSBmoduleconnected tothe computerforsetting motor
parameters.
WWW.0577MX.COM

3.Connectedwithindependentconventionalreceiver:userscan selectMode/Tilt/Roll input
channelconnectto conventionalreceiver, and make sure powerground connection rightly.
4.Connectedwithflightcontrollerreceiver:userscan selectMode/Tilt/Roll inputchannel
connecttoconventionalreceiver,and makesurepowergroundconnection rightly,butdonot
connectthe 5Voutputwire.
WWW.0577MX.COM

5.SBUSreceiver:
WWW.0577MX.COM

6.DSM2/DSMJ/DSMXreceivertype
DSM2-1 TransmitterisDX7 etc. (bindingby 6or7 channelsreceiver)
DSM2-2 TransmitterisDX8, DSX9etc. (binding by6 or7 channelsreceiver)
DSM2-3 TransmitterisDX8, DSX9etc. (binding by9 channelsreceiver)
DSM2-4 TransmitterisDM8, DM9 module. (bindingby 6 or7 channelsreceiver)
DSMJ TransmitterisDSMJ format. (Binding by matched receiver)
DSMX-1 TransmitterisDX8 etc.(11msmode, binding by matched receiver)
DSMX-2 TransmitterisDX8etc. (22msmode, binding by matched
receiv
7.Sensorconnecto:
WWW.0577MX.COM

8. Connected with motors
2.Intialtilting angle introdution:
The initialtilting angleofT-2Ddefault factorysetting is0degree. Ifyou wanttochange the
initialtilting anglewhen the gimbalrestart,you couldmodifythe inittilt angleparameterinPC
software, and click write setting to flash .
WWW.0577MX.COM