TAT Electronics T51 User manual

1
User Manual
Action Camera
FCC ID: 2AM69T51
Model: T51
Made by: Shenzhen TAT Electronics Co., Ltd
Version: V1.0

2
1. Key Feature
Video Resolution:4K@25fps, 2.7K@30FPS, 1080P@60FPS, 720P@120FPS
Image Resolution: 14MP
2’’ TFT screen
3.8V/1000mAh removable Lithium-ion battery
Support Wi-Fi connection, range up to 20 meters
Customized App: Android & iOS
Support 2.4G remote controller
Support Micro SD Card up to 32GB
Support External MIC (optional)
Support Fast charging
Bundle with waterproof case can support underwater 45 meters

3
2. Accessories in standard package
Camera x 1 Flat mount x 1
Waterproof case x 1 Curved mount x 1
Remote controller x 1 3M adhesive for curved mount x 1
Quick release mount x 1 3M adhesive for flat mount x 1
Lock bolt x 2 knuckle x1
USB Cable x 1 Spanner x1

4
3. Camera Diagram
〡〡
A (Power/Mode Button) B (Shutter/Menu Button)
〡〡
Indicator C D

5
HD port Micro USB port
〡〡
〡
SD card slot
4. Using Your Camera
4.1 Power on & Power off the camera
Turn on
Long press Power button A for 3 seconds to power on, indicator D turns blue.
Turn off
Long press Power button A for 3 seconds to power off, indicator D turns off.
4.2 Insert a Memory Card
Pull off the cover on the right side of the camera and insert a Micro SD card into the
Slot.
NOTE:
1. We suggest using Class 6(or higher) Micro SD card for Smooth shooting purpose.
Lower Class of the Micro SD Card may cause the video blur or unavailable.

6
2. There is only one correct direction to insert the SD Card into the slot. Do not
force the card into the card slot as it may damage both the SD Card and camera.
3. A new Micro SD Card should be formatted before using.
4.3 Charge the battery
Before using the T51 for the first time, please fully charge the battery .
Procedure:
1. Connect the T51 with a charger or device by Micro USB cable.
2. Charging Indicator C turns red during charging.
3. A complete flat battery takes around2.5 hours to get fully charged.
The red indicator turns off after the battery fully charged.
4. When the battery is going to run flat, the red indicator c blinks twice a second.
5. Some functions such as Wi-Fi is unavailable if the battery in low condition.
4.4 Insert camera into waterproof case
1. Ensure the case is dry and clean.
2. Insert the camera and make sure the lens fits neatly in the lens cavity.
3. Close the locking clamps.
4.T51 can be mounted using the accessories provided.
4.5 Shoot Video
Press Shutter/Menu button(B) when powered on, LED D turns blue and keep
blinking twice a second; Press again to stop.
4.6 Shoot a Single Picture
Press Power button（A）twice to enter photo mode. Press Shutter button(B) once to
shoot a single picture, LED D flashes blue.

7
4.7 Mode Shift
1. Main mode shift (A)
When powered on, short press on button A to shift among Video -
Photo- Playback- Setup, pause to confirm on current mode.
2. Main mode shift (B)
When powered on, long press on Shutter button B for 3 seconds to enter Setup
menu: Video - Photo - Effect - General.
Press power button A to select, press shutter button B to enter

8
5. Setup your camera
Long press on Button B to enter Setup ”Video - Photo - Effect –General”, press
Power Button A to navigate and press Shutter Button B to confirm. Long press on
Button B again will exit.
5.1 Video SETUP
Mode
To set the videomode, Manual, Looping, Auto Stop, Timelaspe.
(Note：Only auto stop and manual mode supported in 4k@25fps, 2.7k@30fps)
RESOLUTION
To set the video resolution: 4k @25fps，2.7k @30fps，1080P@60FPS,1080P
@30FS,720P@120FPS,720P@60FPS

9
FOV
To set the lens wide angle, Super Wide, Wide, Medium, Narrow.
Video Quality
To set the video quality.
DIS
To set the digital image stabilization.
(Note: Date stamp function will be unable when turn on DIS, DIS function will be
unable when turn on date stamp)
SCENE MODE
To set different scene mode, Manual, Water, Riding, Winter, Diving, Night.
5.2 Photo Setup

10
MODE
To set the photomode, Manual, Timelapse, Burst, Self Timer.
MEGA PIXEL
To set the image resolution 14MP,12MP,8MP，7MP
FOV
To set the lens wide angle, Super Wide, Wide, Medium, Narrow.
PICTURE QUALITY
To set the picture quality.
SCENE MODE
To set different scene mode, Manual, Outdoor, Indoor, Portrait, Landscape, Night.

11
5.3 EFFECT SETUP
ZOOM
To zoom the image x1, x2, x3, x4.
FILTER
To define the amount of color saturation.
To define which image areas are used to calculate the correct exposure.
EV
This allows user to set the light exposure value.
WHITE BALANCE
Factory default is Auto. If you switch Auto OFF, remember to adjust
when lighting condition changes.

12
ISO
This is the measurement of the sensor’s sensitivity to light.
UPSIDE DOWN
To rotate the screen.
TIME STAMP
To define if the time mark is displayed at the bottom of the videos or pictures.
(Note: Date stamp function will be unable when turn on DIS, DIS function will be
unable when turn on date stamp)
5.4 GENERAL SETTING
CONTROL
Thisallows user to set the microphone volume, Speaker volume, LED Brightness.

13
BEEP
Turns off or on sound when a button is pressed.
LED INDICATOR
Turns off or on the LED indicator.
Wi-Fi
Selecting to turn on or turn off the Wi-Fi function.
Wi-Fi INFO.
To display the currently Wi-Fi SSID & Password.
RF Remote Controller
To select turn on/off RF Remote Controller code signal.
QUICK REC
The camera will start recording automatically after a few seconds as selected when
powered on.

14
AUTO LCD OFF
This will determine if the LCD will turn off after 30sec, 1 min or 5 min. Press any key
to turn the screen on.
Select OFF to keep the screen always ON.
AUTO POWER OFF
The camera turns off when not in use after specified time.
TV OUT
Setting the desired TV standard, PAL or NTSC.
TIME SETUP
This allows user to adjust the date &time.

15
LANGUAGE
To select the device language, total 4 different languages.
MEMORY FORMAT
This is to format the SD card. Choosing to format the card will permanently erase all
data on the card.
DEFAULT
To reset the camera in factory default.
SOFTWARE INFO
To display the currently installed firmware version.

16
6. Playback Mode
Press Power Button A three times to playback mode, press B to confirm.
Press power button A to select photo or video, long press shutter button B to confirm.
Press power button A to select photo/video, short press to play. Short press Shutter
button B again to exit.
7. Remote Control
7.1 Pairing Procedure
Long press shutter button B to enter setup, press power button A to navigate. Press
shutter button B to enter general setting, select RF CTRL. Turn on RF CTRL.

17
With camera RF CTRL on, press power Remote Control button and hold on for
3seconds to turn on the controller and pair . The LED Indicator will blink blue.
7.2 Using your remote
Photo Shot: Press the Photo button once to shoot a single picture, the LED indicator
of remote flickers twice.
Video Record: Press the Video button once to start recording, the LED indicator
flickers twice also, press the Video button again to stop.
Power Off button: Press the Power Off button and hold on for 3seconds to turn off
the camera, the LED indicator turns off accordingly.
7.3 Replace the Battery
When the battery capacity is low, LED indicator flickers once per second. You need
to replace with a new button battery.
How to replace a button battery?
1. Begin by purchasing a replacement battery for your remote. You need a button
battery with model No. CR2032.
2. Screw the round cap at the bottom of remote. Please see above pictures.
3. Remove the old battery.
4. Insert the new battery into the slot where the old battery was, with the flat
surface up.

18
8. Wi-Fi Setup
The T51 allows full camera control, live previewing and playback of photos/videos on
most Smartphones and Tablets.
a. Press Wi-Fi button to turn on /turn off Wi-Fi.
b. Download the App “iSmart Pro” from “Google Play” or from the Apple “App
Store”.
c. Activate Wi-Fi in the GENERAL SETUP MENU.
d. Go to the Wi-Fi settings on your Phone, you will seet51_xxxxin the list of
available Wireless networks.
e. Connect your Phone to the “t51_xxxx” via Wi-Fi.
The default Wi-Fi Password for the T51 is: 1234567890.
Note: You can change the Wi-Fi password in the menu setting.
f. Open the app “iSmart Pro”
Important: Before connecting camera via Wi-Fi, you need to download the
“iSmart Pro” App on your smart phone or tablet.

19

20
9. Saving and Viewing Options
9.1 Connecting to TV
You can display the camera LCD screen on a TV screen.
Note: You will need anextra Mini HDMI to HDMI cable, which is not included in the
standard package.
Turn the camera on;
Connect Mini HDMI end to the port on camera and HDMI end to HDMI port on
the TV;
Select the right source on the TV;
Turn the camera on.