Walker Edison W60VI2DD User manual

Secure cam bolt (B) into part (1).

Insert wooden dowel (A) into part (4, 6, 7) as per diagram.

Insert wooden dowel (A) into part (3, 5), secure cam bolt (B) into part (3, 5) as per diagram.

Disassemble drawer slider (R) by sliding the slider arm and slider bracket apart.
Depress the small lever of the slider bracket and carefully pull the two pieces apart.
Repeat this process for both drawer sliders (R).

Secure slider bracket of drawer slider (R) to part (19, 20) using screw (N) with Philips screwdriver.
Repeat this process for both drawers.

Secure slider arms of 2 sets drawer slider (R) to part (3, 5) using screw (N) with Philips
screwdriver.

Secure part (7) to part (5) using cam lock (C) as per diagram.

Secure part (7) to part (3) using cam lock (C) as per diagram.

Attach part (2) to part (4, 6, 5, 3) using screw (F) with hex key (H) as per diagram.

Attach part (15, 16) using bolt (G) with hex key (H) as per diagram.

Insert part (10, 11, 12) into grooves of part (2, 3, 5, 6, 4) as per diagram.

Secure part (1) to part (3, 5, 4, 6) using cam lock (C) as per diagram.

Step 13
10 �
11 乃11酰
 只11 1匮
（
—————————— 
L ——)
————— 
（
/ "
L
/l
w
—————————— 
＼
__ lJ
 「  
Atta c h plasti c w edge ( L ) using s c re w (K) w ith Philip head s c re w driver.

Secure cam bolt (B) into part (17). Repeat this process for twice.

Attach part (19, 20) to part (18) using screw (M) with Philip head screwdriver. Repeat this
process for twice.

Insert part (21) into grooves of part (19, 18, 20) as per diagram. Repeat this process for
twice.