Askia Kameleon K4 User manual

Kameleon K4
ACOUSTIC PODS
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
Info.
Power Drill needed.
Allen key needed.
Allen key and screws needed.
T-Handle hex key needed.
T-Handle hex key and screws needed.
Unlocked.
Lock.
Level check.
Steps.
Bag with screws.
Screwdriver needed.
Main Ethernet supply.
Main Power supply.
Ventilation coupling.
Power coupling.
Ethernet coupling.
Lighting coupling.
Motion sensor coupling.
Magnetic coupling element.
Whiteboard.
Pinboard.
VESA Adapter.
Pay attention to.
Pay attention not
to break the glass.
Ok.
Stop.
Do.
Don’t.
Pay attention to.
Move in place.
Position the door on pins.

Assembly in 150 min. with 3 people
Included
x1 T-Handle Hex Key 4 x1 T-Handle Hex Key 5 x1 T-Handle Hex Key 7 x2 Sucction cupsx1 Ceiling Panels Adjusterx1 Allen Key 2 x1 Allen Key 3
x6 x8
x32 x2

Elements
x1 Center Back Glass Wall
x1 Door Frame
x2 Ceiling
x1 Ceiling Coupling connection
x2 Media adjuster
x1 Door Handle
x6 Acoustic Felt Ceiling Panels
x6 Carpet, x4 Dividers
x2 Floor
x1 Floor Coupling connection
x4 Interior Panels x2 Left & x2 Right Structure Panels
x4 Exterior Panels x1 Left & x1 Right
Coupling connections
x1 Left & x1 Right Back Glass Walls x1 Left & x1 Right Front Glass Walls

1
T-Handle Hex Key 4

2
x16 with
T-Handle Hex Key 4

3
Top
Bottom
x8 with
T-Handle Hex Key 4
Bottom
Top

4
Top
Bottom
T-Handle Hex Key 7
Top
Bottom
Inside
Outside

5
T-Handle Hex Key 4
T-Handle Hex Key 7
Inside

6
x16 with
T-Handle Hex Key 4
T-Handle Hex Key 7
Inside
Outside

7
Recommendation
It is recomended to start with
the Center Back Glass Wall.
T-Handle Hex Key 7
Sucction cup handles
Inside
Up

8
T-Handle Hex Key 7
Sucction cup handles
Inside
Outside

9
The door opening can
be oriented Left or Right
just by rotating the frame.
Recommendation
It is recomended to start
with the Door Frame.
Sucction cup handles

10
InteriorExterior
InteriorExterior
x6 with
T-Handle Hex Key 4
x2 with
Allen Key 3

11
Bottom
Top
Pay attention not to
break the glass door.
Check if the door closes
properly and adjust the
door plates if needed.
Tighten or loosen the
plates when needed.
To adjust the glass door the height must be
calibrated. If you need to raise the glass door,
you loosen the top hinge and tighten the
bottom hinge.
If you need to lower the
glass door, you loosen
the bottom hinge and
tighten the top hinge.
Allen Key 3
Allen Key 2
Adjust the glass door if
necessary.
Check if the glass door
hits the frame edge before
closing it.

12
T-Handle Hex Key 7
Sucction cup handles
Inside
Outside

13
Main Power & Ethernet supply at the
back of the pod.
Check if the lighting, ventilation and
power sockets are conected properly.
Orange Black

14
How to remove
the Interior Panel.

15
Front
Back
How to remove
or adjust the
Acoustic Felt
Ceiling Panels.
How to place
the Acoustic Felt
Ceiling Panels.
Ceiling Panels Adjuster

16