Taurus F Series User manual

MNL 162.4 1
I NDUSTRIAL LCD MONITOR
”F” SERIES
Instruction Manual - Manuel d’utilisation
Manuale d’istruzione
MNL204.1
MONITEURS INDUSTRIELS
SERIE ”F”

2 MNL204.1
ENGLISH

MNL204.1 3
ENGLISH
INDEX
1GENERAL DESCRIPTION ..................................................................................................... 5
1.1 INTRODUCTION ....................................................................................................................5
1.2 NOTE.......................................................................................................................................5
1.3 WARNINGS ...........................................................................................................................5
1.3.1 SYMBOLS AND CONVENTIONS ......................................................................................................5
1.3.2 SAFETY................................................................................................................................................6
1.4 CE REGULATION ...................................................................................................................6
1.4.1 PRODUCT LABEL............................................................................................................................... 7
1.5 LIMITED RESPONSIBILITY DECLARATION ...................................................................... 7
1.5.1 MAINTENANCE AND WARRANTY .................................................................................................. 7
1.6 PACKAGING ........................................................................................................................... 7
1.7 TECHNICAL SPECIFICATION ............................................................................................8
1.7.1 OPERATING CONDITIONS OF USE ...............................................................................................9
1.8 NAVIGATION KEY ..................................................................................................................9
2MENU’ OSD........................................................................................................................... 10
2.1 MENU’ PICTURE ..................................................................................................................10
2.2 MENÙ SOURCE ...................................................................................................................10
2.3 MENÙ ADVANCED ................................................................................................................11
2.4 MENÙ OPTIONS ....................................................................................................................11
2.5 MENÙ INFO ..........................................................................................................................12
3USE OSD............................................................................................................................... 12
3.1 MENÙ PICTURE ................................................................................................................... 12
3.2 SUBMENÙ PICTURE ...........................................................................................................13
3.3 CONFIRMATION SUBMENÙ ...............................................................................................13
4CONNECTORS PIN OUT .................................................................................................... 14
4.1 VERSION IP65 AND IP67 .....................................................................................................15
4.2 CONNECTION IP65 AND IP67.............................................................................................16
4.2.1 CONNECTION FOR 12VDC/24VDC IP67 .......................................................................................16
4.2.2 CONNECTION FOR 100-240VAC IP67............................................................................................16
4.2.3 CABLES POSITIONED INPUT IP65................................................................................................ 17
5CONNECTORS OF POWER SUPPLY................................................................................ 18

4 MNL204.1
ENGLISH
5.1 POWER CONNECTOR 12V-24VDC FOR IP65....................................................................18
5.2 ACCESSORIES CONNECTION OF POWER SUPPLY .....................................................18
5.2.1 POWER SUPPLY 12VDC FOR IP67 ...............................................................................................18
5.2.2 CONNECTOR 12-24VDC FOR IP67 .......................................................................................18
5.2.3 100-240VAC POWER CONNECTOR FOR IP65 ............................................................................19
5.2.4 100-240VAC POWER CABLE FOR IP67 ........................................................................................19
6OUT OF ORDER AND DISPOSAL ..................................................................................... 20
7VESA SUPPORT MOUNTING............................................................................................. 20
8ACCESORIES........................................................................................................................21
8.1 SUPPORT ON WALL .......................................................................................................... 21
8.2 SUPPORT ON CEILING .......................................................................................................22
8.3 TABLE STAND .....................................................................................................................22

MNL204.1 5
ENGLISH
1.1 INTRODUCTION
The Taurus monitor you buy is composed whit stainless steel. it can easily handle splashed water,
impacts and vibrations.it is professional display designed to operate with analogue signals (VGA),
digital graphic signals (DVI-D). Thanks to these features, they are suitable for several applications
such as the industrial, food and beverage and many others.
Main features:
• Manual regulation of the amplitudes, frequencies and movements of the image with 3 memories;
• All the monitors can accept separated syncs (H-V), composite syncs (HVS) and sync on green
signals;
• Auto detect of the input signal Auto adjustment function for perfect geometry settings at full
screen;
• (DPMS) Energy saving function switches off the monitor in case of missing input signal;
• Full range power supply 100-240Vac,built in the monitor cases;
• 12Vdc & 19-36Vdc supply are also available;
• Full screen function; Video signals with lower resolution then the TFT can be stretched to the
full screen dimensions Image compression function;
• Video signals with higher resolution then the TFT can be compressed to the full screen
dimensions;
• OSD functions can be controlled by the control keys on the monitor, by a remote control unit
or via RS232;
• Multilanguage On screen display (english/italian/german);
• Infrared receiver (IR) available;
• Customer logo at switch on;
• Resistive, capacitive, SAW touch screens available.
1.2 NOTE
The instructions given in this manual are not a contractual obligation. The warranty conditions are
determined by law. The warranty is normally provided concerning malfunction of the product and
does not cover damages caused by misuse and tampering.
All rights are reserved. Any reproduction or translation of this manual is prohibited without our
permission.
1.3 WARNINGS
1.3.1 SYMBOLS AND CONVENTIONS
This symbol alerts the user to the risk of damage to things
or loss of data, if the observations are not respected.
1 GENERAL DESCRIPTION
This symbol warns the user of a hazard which may cause
serious injury or death, if the observations are not respected.

6 MNL204.1
ENGLISH
• Put this equipment on a reliable surface during installation.
Dropping it or letting it fall could cause damage to things or
harm to people;
• Make sure the voltage of the power source is correct before
connecting the equipment to the power outlet;
• If the equipment is not used for a long time, disconnect it from
the power source to avoid damages.
• Before connecting the equipment to the power outlet, make
sure the outlet is grounded according to the laws in force.
The power outlet should also be located as close as possible to
the equipment, so it can be quickly and easily unplugged.
Store the equipment according to the temperature and humidity ranges written in this manual.
If any of the following situations arises, get the equipment checked by service personnel:
The power cord or plug is damaged.
• Liquid has penetrated into the equipment;
• The equipment does not work well, or you cannot get it to work;
• The equipment has obvious signs of breakage or damage.
This manual contains all instructions for proper installation and maintenance the product you
purchased. In the box packaging all the support documentation is provided.
1.4 CE REGULATION
Our products are designed in accordance with the requirements of the Electrical Safety EU directive.
2014/35/UE – LVD LVD (Essential Health and Safety Requirement of the Low-Voltage Directive)
And Electromagnetic Compatibility OF THE EU directive2014/30/UE – EMC (Electromagnetic
Compatibility Directive) in order to a!x the CE mark, in relation to standards:
• CEI EN 60950-1 Electrical Safety
• CEI EN 55024 – CEI EN 55022 Electromagnetic Compatibility
1.3.2 SAFETY
Read these safety instructions carefully. Keep this user’s manual for later reference and observing
all the warnings on the product as follow.
• Electric shock hazard – Do not operate the machine with its
back cover removed. There are dangerous high voltages inside;
• Never open the equipment. For safety reasons, only
quali"ed service personnel should open the equipment;
• Disconnect this equipment from any outlet before cleaning.

MNL204.1 7
ENGLISH
1.4.1 PRODUCT LABEL
All products are identi!ed with a production label that shows all the product’s identifying elements:
• Manufacturer’s mark;
• Product Description;
• Product Model;
• Serial Number;
• Production data.
1.5 LIMITED RESPONSIBILITY DECLARATION
Any updates to the product could be the cause of updates to this manual, therefore the
manufacturer reserves the right to modify it, in whole or in part, without warning obligation.
The manufacturer also will not accept any liability for damage caused to people or things close to it
in the following cases:
• Misuse of the product and its accessories;
• Improper assembly and installation;
• Unauthorised, modifcation or interventions;
• Using not original spare parts;
• Failure to comply with the rules established by this manual.
Keep the manual with the utmost care in a dry place and protected, always available for
future reference. The manual should be kept as long as the product is in operating life.
In case of user’s manual loss or damage, ask the manufacturer for a new one.
1.5.1 MAINTENANCE AND WARRANTY
The product of this manual does not require any maintenance from the user besides the usual
cleaning of the screen, which must be performed with a speci!c non-aggressive, alcohol-free
cleaning agent, sprayed on a soft cloth. For product repair, the user shall contact the manufactur.
1.6 PACKAGING
The PACKAGING is composed by a cardboard box with inside expanded material shells that
guarantee safety during the shipment by carriers.
• LCD TFT monitor;
• Documentation (This manual);
• Connection cables.
Never open the equipment. For safety reasons, only quali!ed service personnel
should open the equipment.
Do not use sharp or scratching objects or corrosive substances that can damage
the active surface of the touch screen.

8 MNL204.1
ENGLISH
1.7 TECHNICAL SPECIFICATION
• Class protection IP65 or IP67: Compliant with CEI EN 60529
• Food sector safety: In accordance whit (CE) N 1935/2004
• ON materials and articles entended to come into contact whit food an articles repealing
directives. 80/590/CEE e 89/109/CEE
• Material used for the case: AISI304 or AISI316 (Optional)
Power supply input:
• 100 ~ 240 Vac 50/60Hz ;
• 12 Vdc (11-14Vdc);
• 24 Vdc (19-36Vdc).
Power consumption:
15W ~ 60W (in funzione della grandezza del display).
VGA Standard input signals:
RGB analogue, 0.7 ~ 1VPP level ON 75 ohm impedance HD15F (See section “INPUT SOURCE”).
Supported resolutions:
VGA/SVGA/XGA/SXGA/WUXGA;
• WUXGA 1920X1080;
• Plug & Play;
• Plug & Play compatibile;
• Sincronismo separato / composito;
• 0.3 ~ 5Vpp +/- level.
Other input signals (Optional):
• DVI-I / CVI-D (Single link) Plug & Play compatible;
• CVBS multistandard (PAL-SECAM-NTSC);
• S-VIDEO multistandard (PAL-SECAM-NTSC).
- RGB ANALOGUE:
◊ Signal: positive analogue;
◊ Signal level: 0.7 ~ 1Vpp (75 ohm);
◊ Sync signals: separated/composite;
◊ Sync level: 0.3 ~ 5Vpp +/-;
◊ Sync on green: 0 ~ 0.5Vpp level.
- RGB additional boards
• boards BNC RGB avec connecteurs:
◊ 5 x BNC ;
NOTE: In the monitors whit additional inpout boards the video (CVBS& SVHS) and DVI inputs are
not avaiable.

MNL204.1 9
ENGLISH
1.7.1 OPERATING CONDITIONS OF USE
Operating conditions:
• Temperature: -5°C +60°C
• Humidity: 10% - 80%
• Altitude: 0 - 3000mt
Storage conditions:
• Temperature: -20°C +60°C
• Humidity: 5% - 80%
• Altitude: 0 - 3000mt
Shipment conditions:
• Temperature: -20°C +60°C
• Humidity: 5% - 80%
• Altitude: 0 - 12000mt s.l.m
1.8 NAVIGATION KEY
Use of external OSD keyboard:
• Led= Operating led;
• “Menu/ enter”= Enters the OSD menu;
• “+”= Increase the value of the selected parameter;
• “ - ”= Decrease the value of the selected parameter;
• “ESC”= Exit the OSD menu;
• “SRC”= (OPTIONAL) Switch the different input signals.

10 MNL204.1
ENGLISH
2 MENU’ OSD
2.1 MENU’ PICTURE
• Auto adjust : This function serving to operate auto adjustement;
(the function performed out automatically);
• Brightness : Brightness adjust;
• Contrast : Contrast adjust;
• H position : Controls the horizontal image postition;
• V position : Controls the vertical image postition;
• Phase : Adjust the sampling rate in order to improve focus, clarity and image stability;
• Frequency : Sets up the sampling rate. Larger values make the displayed image appear wider,
smaller valuesmakeit appear compressed;
• Sharpness : Controls the picture’s sharpness;
(some applications are enabled based on the input.).
2.2 MENÙ SOURCE
• De!nes the RGB input between composite video and DVI.