Teac LEB3298FHD User manual

Note: Please make sure that the unit is completely disconnected
from the main power supply before changing cable connections.
2.Insert batteries
according to +/- polarity
symbols.
(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
(Not Supplied)
MODEL: LEB3298FHD
Video R-in L-in Y Pb Pr PC-IN VGA RF
Video R-in L-in Y Pb Pr PC-IN VGA RF
HDMI1 HDMI2 Coax
USB2USB1LAN
Video R-in L-in Y Pb Pr PC-IN VGA RF

0118020364
OSC
0118020364
OSC
B Press DTV/USB button on the remote control.
"DTV", "ATV", "AV", "PC", "YPbPr", "Blu-ray", "HDMI1",
"HDMI2", "USB".
27-31
21-26
Video R-in L-in Y Pb Pr PC-IN VGA RF
HDMI1 HDMI2 Coax
USB2USB1LAN
Coax
ULAN
15(For more details see "CHANNEL Menu", page
with an external power supply. Use only USB2 for recording.
Connect the power cord to your AC power supply and flip the on the back of the TV to ON.
The TV LED indicator will light up in red, showing that the TV is now in Standby Mode.
Press the button on the remote control or on the TV's button panel to turn the TV on.
The LED indicator will light up in green, and the TV will take a few seconds to start up.
Connect your antenna to the RF port.
If the LED Indicator is not lighted, please check that the physical is flipped to the ON position.
Power Switch
POWER/STANDBY
NOTE: Power Switch
USB1