Technaxx TX-158 User manual

Technaxx®* User Manual
WiFi FullHD Microscope TX-158
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby
declares that this device, to which this user manual belongs, complies
with the essential requirements of the standards referred to the Directive
RED 2014/53/EU. The Declaration of Conformity you find here:
www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before
using the device the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute
from German fixed-line and 42 cent/minute from mobile networks). Free
Email: suppo[email protected]
The support hotline is available Mon-Fri from 9 am to 1 pm & 2 pm
to 5 pm
This device has a rechargeable battery. It must be fully charged
before first use. NOTE: Charge the battery of the device every 2–3
month if it is not used!
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product. *Share your experience and opinion on one of
the well-known internet portals.
Features
•Up to 1000x magnification
•WiFi function for wireless picture capture
•FullHD resolution
•Photo and video mode
•8 LED for perfect brightness
•Magnification adjustable with turning wheel
•For Windows, Android and iOS
•Free App for live view at your smartphone or tablet
•With stand inclusive

Product overview
1
Micro-USB charging port
4
Picture / video capture
2
Power switch / LED luminance
control
5
Focus/ magnification wheel
3
LED indicator light / Reset
6
LED lights

Specifications
Resolution
FHD (1920x1080) / 1M(1280x720) / VGA (640x480)
WiFi
Radiated output power max. 100mW
Network Interface: 2.4GHz WiFi
WiFi: IEEE802.11b/g/n
Aperture
F 1.2 f=25mm
Lens Angle
FOV=16°, diameter is 24mm
Magnificartion
50x up to 1000x
Storage Media
Smartphone / PC
USB Port
Micro USB 2.0
Power Source
DC 5V, 1A
Built in battery
Type lithium ion, 3.7V 800mAh
Working time
Approx. 90min.
Operating Temperature
0°C to 40°C
Compatibility
Android 4 & iOS 8 or above / Windows
Dimension
approx.130*49*68mm
Weight
approx.170g
Starting up
Press and hold the power button (2) for 3 seconds to turn on the device.
Press and hold the power button (2) for 3 seconds again to turn off the
device.
Micro USB charge interface
Before the first use please charge the WiFi Microscope fully. When the
device has low power, please connect it to the charger to charge it; it is
not suggested to use the device during charging (in order not to reduce
the service life of the device battery).
Download APP / Install PC Software
Scan the QR-Code to download the APP for
Android or iOS, or got to the APP-Store or Play-
Store and search for “iWeiCamera” for Apple and
“HVCamwifi” for Android.
Use the attached CD to open the Windows software. Note:
No installation needed.

Setting Wlan and APP
Open the Wifi setting of your iOS/Android device to find the WiFi hotspot
(unencrypted) with the prefix of “Cam-XXXXXX”. Click it to connect the
device with your smartphone and return to the main interface of the
iOS/Android device after successfully connected.
Taking pictures
1. Zooming: Turn the focus wheel until you reach the personal best view
option. Note: If the autofocus doesn’t focus the object automatically, turn
the focus wheel slightly up and down.
2. Press the camera button on the WiFi Microscope or press the camera
icon in the APP.
Note: To save the pictures you have to be connected via the APP to a
device which is connected to the Microscope or with a PC while using the
PC software.
Recording video
1. Zooming: Turn the focus wheel until you reach the personal best view
option.
2. Press and hold the camera button on the WiFi Microscope at least 3
seconds or tap the video icon in the APP to start capture a video.
3. Finish recording by pressing the video button in the APP again or hold
the camera button on the WiFi Microscope for 3 seconds.
Set the LED brightness
To change the LED brightness, press the power button once.
It changes the brightness to a higher level. The WiFi Microscope has 4
different brightness level.
To turn the light off press the power button 4 times. The next press on
the power button will turn on the LED at the first brightness level.
Resolution in photo and video mode
Swipe in the APP to the left side to open the menu to change the
resolution settings.
Photo / Video
Resolution
Set the resolution to 1920x1080 / 1280x720 or
640x480

Playback
The saved files are viewable in the APP by start the APP and click on the
file system folder.
For saving the files in the PC programm you have to set a file directory
path for captured files by click on the first option “File” and set a path.
PC Software
PC camera mode –Connect the Microscope with the attached data
Micro-USB cable and to the PC. Wait for detecting the device. Put the
attached disc to your CD-drive. Or download the software from our page:
www.technaxx.de/support and use the search function on the bottom of
the page.
Start the software “Amcap”with the disc which is attached to the
package. Note: Be sure the device is detected from the PC first.
The device automatically enters the PC camera mode after connect it
with the PC. Open the software “Amcap”on
the computer and select the option “Devices”.
The device name is GENERAL-UVC (Picture
1). Finally select under Options -“Preview” to
display the live image of the WiFi Microscope
(Picture 2). In PC mode, on/off key and
supplement light potentiometer are valid and
other keys are not available.
To make videos enter the option “Capture” and press “Start Capture”.
To make pictures enter the option “Photo” and press “Start Photo” or use
the shortcut F3 on your keyboard.
Care and maintenance
Clean the device only with a dry or slightly damp, lint-free cloth.
Do not use abrasive cleaners to clean the device.
This device is a high-precision optical instrument, so in order to avoid
damage, please
●Do not use the device in ultra-high or ultra-low temperature
●Do not keep it or use it in moist environment for long
●Do not use it in rainfalls or in water
●Do not deliver or use it in strongly shocking environment
Picture 2
Picture 1

Hints
●The device is intended exclusively for private and not for commercial
use. ●Only use this device as described in this user manual. ●Do not
place any part of this device in water or any other liquid. ●Do not handle
the device with wet hands. ●When disconnecting the cable, always pull
at the plug. Do not pull on the cable itself. ●Prevent it comes into contact
with hot surfaces. ●Keep it away from heat sources to avoid deformation
of plastic parts.
Safety Instructions
●Children should only use the device under adult supervision. ●Keep
packaging material, like plastic bags and rubber bands, out of the reach of
children, as these materials pose a choking hazard. ●Do not place the
device, particularly the lenses, in direct sunlight. The concentration of light
could damage the device. ●Do not disassemble the device.
Hints for Environment Protection: Packages materials are
raw materials and can be recycled. Do not disposal old devices
or batteries into the domestic waste. Cleaning: Protect the
device from contamination and pollution (use a clean drapery).
Avoid using rough, coarse-grained materials or
solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH &
Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany