Technicolor TG588 User manual

Fleur Broadband

2
Contents
How to set up your router 3
How to connect your devices 5
Having trouble connecting? 6
That’s it! 7
What is in your pack?
Grey & yellow
cables x2 MicroltersPower supply
Your
router
In your pack you should nd all the below items.
Please note that in the box
you will nd two microlters,
however only one is required
at the master socket for your
broadband set-up as shown in
the next couple of pages. The
second microlter should only
be used if you have another
corded phone plugged into
an extension socket.
Stand
Please do not connect your router until the date we have
informed you your services will go live.

3
How to set up your router
1. Plug the power supply into your router and connect the power supply into
the wall socket.
2. Take the grey DSL cable and plug it into the grey DSL port on the router,
plugging the other end into the ADSL port on the lter.
3. Plug the microlter into your phone socket and your home phone into the
other port on the microlter.
4. Turn your router on by pressing the power button and the router lights
will icker briey. Please have a 10 minute break while your broadband is
activating.
5. Connect devices directly into your router using the yellow Ethernet cable.
Plug one end into a yellow socket on your router and the other end into
the network port of your device. Or, to connect your devices wirelessly,
simply follow the instructions on page 5.
1
4
5
2
3
Please attach the stand before plugging in any cables for ease of connection.

4
How to set up your router
Want to get the most from your broadband?
Please visit the FAQs section of our website. Under the Guides tab, you can
nd our useful guide called ‘How to Get the Most from your Broadband’.
It provides an explanation for multiple factors which can affect broadband
speeds, such as: multiple users; range; location and interference; plus the
devices which can improve coverage in the house, and wireless security.
From this point onwards you should keep your router switched on.
Switching off your router will affect the broadband performance.
If any of the power, broadband or internet lights remain red after 10 minutes
then there is a potential connection issue that the Fleur broadband support
team can help you with. Just give them a call on 0333 320 4020 for assistance.

5
How to connect your devices
To connect your devices via Wi-Fi
To connect your internet-enabled devices such as smartphones, laptops,
tablets, smart TVs and games consoles to the Wi-Fi network, please follow the
steps below:
1. Make a note of your network name and wireless key. These can be found
on the sticker on the bottom of your router, and on the Keep Me Card
which came in the box along with your router. Please keep this safe in case
you need to log into your router or connect more devices wirelessly in the
future.
2. Search for the network name on your device.
3. Once you have found the right network and selected it, you will be
prompted for a password or security key – this is your wireless key.
4. Enter your wireless key and you should be connected to your home Wi-Fi
network.
Alternatively, if you have a QR reader on your device, you can use the QR code
on the Keep Me Card to connect.
If you are not sure how to connect your devices to the Wi-Fi connection,
please consult the user manual for your device or operating system (e.g.
Windows, Mac).

6
How to connect your devices
To use WPS
Alternatively, if you have a WPS (Wi-Fi Protected Setup) enabled device and
would like to connect to Wi-Fi using WPS, please follow the steps below:
1. Use the Settings option of your device to enable WPS.
2. Press & hold the WPS button on the top of the router for a few seconds
3. Wait until the WPS light on the top of the router is green.
4. Your device will connect automatically to the router.
Having trouble connecting?
Can’t seem to connect? Follow our quick checklist below to try and x your
problem.
If you have previously connected your devices using the yellow Ethernet
cable and now want to connect wirelessly, please ensure that you unplug
the cable from the router before you switch to Wi-Fi.
The wireless key (password) is case sensitive, so please ensure that you
enter it exactly as it is shown on the bottom of your router.
If you are struggling to connect your devices to your Wi-Fi network,
please make sure that Wi-Fi connectivity is activated on your device.
You will nd this in your settings or by pressing a particular key on your
computer.
Still having problems? Call us today on
0333 320 4020
8am-8pm Monday-Friday &
9:30am-6pm Saturday and Sunday

7
That’s it...!
Take control of your broadband service
Our online account management portal - MyAccount - provides you with full
access to make those all-important changes quickly and in your own time.
View and download itemised bills
Enhance your Fleur package by adding new services
Make changes to your payment details
Alter your account settings
Now that you are successfully connected to the internet you can start enjoying
all the perks of unlimited broadband from Fleur!
Keeping your family protected
Fleur Security Suite is our way of making sure that you and your family can
enjoy the internet safely and condently.
Recognised by UK BSi Kite Mark for Online Child Safety
Block inappropriate websites
Monitor usage of your family members
Set time limits per activity, to control access during certain times of the
day
Includes an industry-leading virus protection package, Symantec End-
point Protection, to proactively identify les that are at risk and stop
threats without slowing you down.
Fleur Security Suite is included in all our 12-month broadband contracts.
Your log-in details can be found within the Installation Instructions in your
router box.
Log in to your MyAccount today by visiting:
myaccount.eurtelecom.co.uk
www.eurtelecom.co.uk
0333 320 4020

8
0333 320 4020