Technotherm TT-KS 1200 S DSM User manual
Instrucon Manual -
SmartControl Interface
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND
RETAINED FOR FUTURE REFERENCE.
BE SURE TO OBSERVE ALL LABELS AND WARNINGS ON
THE APPLIANCE.
Edion:06/22
Nr.: MAG-000 146
Subject to errors and technical amendments. Dimensions without guarantee!
- Save energy
Smart heang-
ErP
CONFORM
ÖKODESIGN
hps://app.technotherm.com
This is a quick reference guide.
More detailed informaon, vi-
deos and error messages can be
found on the following website:
www.electric-smart-heater.com
Link to the web page
2|
Manual Smart Thermostat
Detailed video instruction at www.electric-smart-heater.com
2.0 Operaon of the devices without app
2.1 Modus
The radiator can work at 3 di erent modes:
• Auto. The seng temperature varies automa cally following the programmed Schedule, based on the 3
custom temperatures. The bars in the LCD display inform about which of the 3 temperatures is assigned to each
hour. This mode can be disabled in advanced se ngs so the radiator can work only in 2 modes (Manual and O
• Manual. Fixed temperature. The set temperature only changes if the user modi es it.
• O . The radiator does not heat, but can receive remote orders
In „Auto“ mode -when the temperature is changed in me, the change is eecve for the next 1h30 min. In „Ma-
nual“ mode, the set temperature is xed.
1.0 Operang the devices via an app
1.1 First steps
a) Download the app or go to the following website:
hps://app.technotherm.com
Follow the further instrucons
b) You can nd a detailed video tutorial of the app at www.electric-smart-heater.com
Download der APP:
MODE
|3
Manual Smart Thermostat
Detailed video instruction at www.electric-smart-heater.com
Programming the Temperature of: Comfort, Eco and Frost Protection
Start screen
1 x PROG OK
Start screen
Comfort Temp.
+ -
to select the
temperature
selected
Comfort Temp.
OK and
+ -
selected Eco
Temp.
selected Frost-Protection
Temp.
OK and
+ -
OK
PROG
2.2 Adjust programmed temperatures
In “Auto” mode the temperature of each hour will change automa cally following the programmed Sche-dule. The user must
assign one of the temperatures to each hour:
• Comfort ( ), used normally when the user is at home.
• Eco or saving ( ), für kurze Abwesenheitsperioden
• Freeze ( ), used for periods of absence.
Set the 3 temperatures
2.3 Programming the me and day
Start screen
3 sec. PROG 7 x PROG
The Day is ashing.
1 for Monday
2 for Thuesday
3 for Wednesday ....
+ -
to select the
day
Programming the Day and Time
and conrm
with OK
The hour is ashing.
+ -
to select the
minutes
and conrm
with OK
The minutes are
ashing.
Saturday
13:45
|5
Manual Smart Thermostat
Detailed video instruction at www.electric-smart-heater.com
Start screen
3 sec. PROG
because Eco-Mode
from 0:00 till 6:00
Press MODE
for select
select +
for the
next
hour
The Eco-Mode is always
the default setting
Weekday programming.
To use weekday programming the comfort, eco and frost protection temperatures have to be programmed before. See chapter 10.2
e.g. Day 1:
Eco from 00.00 till 6:00.
Comfort from 6:00 till 21:00
Frost protection from 22:00 till 24:00
Comfort
Eco
Frost Protection
the bar at 0:00
is ashing Day 1
Eco-Mode
select +till 6:00
bar 6:00 is
ashing
the Comfort -
Mode
Comfort-
Mode
Press MODE
for select
the Comfort -
Mode
bar 7:00 is now
ashing
Comfort-
Mode
select +
for the next
hour
repeat till
21:00
Comfort-
Mode
select +
for the next
hour
The Eco-Mode is always
the default setting
Press 2x
MODE
for select
the Frost -
Mode
the Frost - Mode
is selected
select +
for the next
hour
and press
2 x MODE
for select the
Frost -Mode
select +
for the next
hour
and press
2 x MODE
for select the
Frost -Mode
Day 2
Frost-Modus
Repeat with Day 2 till day 7
By press PROG at any time you
will change to the next day!
Eco-Mode
2.6 Programming of weekly and daily temperatures
The heater allows you to create a weekly program that assigns one of the 3 available temperatures to each hour. The program
for each day can be dierent.
• Use comfort temperature for the hours you are at home (represented by 2 rows of bars on the display).
• Use the ECO temperature for the mes when you are away from home (represented by 1 row of bars on the display).
• Use frost protecon when you are away from home for long periods of me (represented by no bar row on the screen).
Example:
6|
Manual Smart Thermostat
Detailed video instruction at www.electric-smart-heater.com
Programming the advanced mode:
e.g. shutt o all additional functions except changing the temperature
Start screen
1 x PROG 5 sec. PROG
Start screen.
C1 till C7
+ -
to select the
conguration
select C7 to shutt
o all additional
functions
OK and
+ -
select for FULL
Mode
select for MANUAL
Mode
or
2.7 Advanced programming mode
|7
Manual Smart Thermostat
Detailed video instruction at www.electric-smart-heater.com
This manual suits for next models
2
Table of contents
