TECHTRAIL SmartLatch User manual


SmartLatch
TIME+TEMP
USER GUIDE
TECHTRAIL INC.
web: www.techtrail.com
email: [email protected]
© 2006 TechTrail, Inc. All Rights Reserved.






The SMARTLATCH TIME+TEMP uses a common AG10 (1.5 VDC)* micro alkaline battery.
TO REPLACE THE BATTERY:
1. Remove the battery door using a coin.
2. Using a small jeweller’s screwdriver, remove the battery cover.
3. Place a fresh battery in the battery compartment with the
positive (+) side facing up.
4. Replace the battery cover and battery door.
*BATTERY MANUFACTURER SPECS:
Generic: AG10 (1.5 VDC)
Citizen: BLR54
Duracell: LR54
Eveready: 189
Maxell: LR1130
Ray-O-Vac: 189-1
Seiko: 89A
Vartra: V10GA
CHANGING THE BATTERY
FOLD
85 CM
COVER
ROLL-FOLD THIS DIRECTION
SLTT_InstructTT.indd 1-2 2/24/06 10:12:04 AM

SETTING THE TIME AND DATE
1. PRESS & HOLD the S2 key.
2. Month digit will blink. ADJUST MONTH by PRESSING the S1 key. PRESS &
HOLD for fast scrolling.
3. ADVANCE to set Day by PRESSING the S2 key. SET DAY by PRESSING the
S1 key.
NOTE: The calendar is programmed for 28 days in February. Date will need to be
adjusted in leap years.
4. PRESS the S2 key. SET HOUR by PRESSING the S1 key.
NOTE: The SmartLatch Time+Temp is capable of displaying time in 12 or 24 hour
formats. When setting hours, time will display 1 through 12 AM & PM, followed
by 0 through 24.
5. PRESS the S2 key. SET MINUTES by PRESSING the S1 key.
6. PRESS S2 to exit the Setting Sequence.
OPERATING THE SMARTLATCH TIME+TEMP
1. PRESS S1 to scroll through display modes.
2. In Temperature Mode, PRESS S3 to CHANGE TEMPERATURE
DISPLAY UNITS from °F to °C.



S1 Changes display mode
Adjusts variable in Setting Sequence
S2 Activates Setting Sequence
S3 Toggles temperature units between
°F and °C



KEYS AND THEIR FUNCTIONS
SLTT_InstructTT.indd 3-4 2/24/06 10:12:05 AM