TECshow Ion 3715Z User manual

ION 3715Z
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

p. 2ION 3715Z
ENGLISH VERSION
Overview
Ion 3715Z is a versatile moving head powered by 37 x 4-in-1
OSRAM® 15W LEDs that sports a variable zoom that goes from
6º to 50º. Versatility and power output get new meanings
thanks to the enormous action capacity brought by its beam
angle variation, the pixel by pixel control and the highlighted
optics design. This moving head is equipped with quad-color
LED technology, enabling a smooth RGBW mix with no multi-
color shadows. The unit comes also with preset programs on
2700K, 3200K, 4200K, 5600K and 8000K color temperatures.
Ion 3715Z is not only a beam & wash moving head with pixel
mapping, but also has the velocity and reaction capacity of
the most compact moving heads in the industry.
Specications
Source & Optics
Light Source: 37 x 4-in-1 OSRAM® 15W LEDs
LEDs life: 60,000 hours
Beam angle: 6° to 50°
Photometric data
Luminous ux: 8000 lumen
6º beam angle: 30440 lux @ 3m (10 .)
50º beam angle: 5200 lux @ 3m (10 .)
Eects and functions
Pixel mapping: Pixel by pixel control
Dimmer: Full range 0-100%
Strobe eect
Quad-color LED technology: Smooth RGBW mix with no multi
colored shadows
Vivid, saturated and uniform colors
Color temperature presets: 2700K, 3200K, 4200K, 5600K &
8000K
Control
DMX Channels: 19/21/41/170
Wireless DMX (optional)
Advanced RDM Function
Indicated temperature for base, arm & lamp
IC backup communication
RDM read voltage, current power consumption of the lamp
Soware update vía DMX
Fan speed based on temperature
Movement
Pan: 540° / 630º
Tilt: 265°
3-phase motor
16-bit resolution
Auto repositioning
Electrical
Input voltage range: 100–240V, 50-60Hz
Power Supply: Automatic range
Max. power consumption: 316W
Physical
DMX Connectors: 2 XLR connectors (XLR-5 input & output)
Power supply connectors: PowerCON® In/Out
2.4 inches LCD graphic display
Dimensions: 444x250x506 mm. / 17.5x9.8x19.9 in.
Weight: 17 Kg. / 37.4 Lb.

• All maintenance must be carried out by a qualied
electrician.
• A minimum distance of 0.5m must be maintained between
the equipment and a combustible surface.
• The product must always be operated in a well ventilated area.
• DO NOT stare directly into the light source.
• Always disconnect the power before carrying out any
maintenance.
• The earth must always be connected to the ground.
• Ensure that all parts of the equipment are kept clean and
free of dust.
IMPORTANT
Every person involved with the installation, operation
and maintenance of this device has to be qualied.
• Follow the instructions of this manual.
• Consider this manual to be part of the total product.
• Keep this manual for the entire service life of the product.
• Pass this manual on to every further owner or user of
the product
• Download the latest version of the user manual from
the Internet.
OPERATING DETERMINATIONS
• This product is only allowed to be operated with an al-
ternating voltage of 100-240 V, 50/60 Hz.
• This device is designed for professional use, e.g. on stag-
es, in clubs, bars, theatres etc.
• Do not shake the device. Avoid brute force when install-
ing or operating the device.
• When choosing the installation-spot, please make
sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables ly-
ing around. Please make sure that the unit cannot be
touched or bumped.
• When using smoke machines, make sure that the de-
For your own safety, please read this user manual careful-
ly before you initially start-up.
SAFETY WARNING
vice is never exposed to the direct smoke jet and is in-
stalled in a distance of 0.5 meters between smoke ma-
chine and device.
• The ambient temperature must always be between -15°
C and +45° C. Keep away from direct insulation (particu-
larly in cars) and heaters.
• Never use the device during thunderstorms. Over volt-
age could destroy the device. Always disconnect the de-
vice during thunderstorms.
• The device must only be installed on a non-amma-
ble surface. In order to safeguard suicient ventilation,
leave 50 cm of free space around the device.
• For overhead use (mounting height >100 cm), always
x the xture with an appropriate safety-rope. Fix the
safety-rope at the correct xation points only. The safe-
ty-rope must never be xed at the transport handles!
• Only operate the xture aer having checked that the
housing is rmly closed and all screws are tightly fastened.
• Operate the device only aer having become familiarized
with its functions. Do not permit operation by persons
not qualied for operating the device. Most damages are
the result of unprofessional operation!
• Please consider that unauthorized modications on the
device are forbidden due to safety reasons!
• Never remove the serial barcode from the device as this
would make the guarantee void.
p. 3ION 3715Z
ENGLISH VERSION

9. Wireless indicator
10. Mic
11. Le button
12. Battery indicator
13. Up button
14. Down button
15. Enter button
16. Right button
17. Ethernet out
18. 5-pin DMX in
19. Ethernet in
20. 5-pin DMX out
21. Powercon
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button
8. Handel
Description of the Device
p. 4ION 3715Z
ENGLISH VERSION

Safety and maintenance Information
Before operate this unit, please carefully read this users guide and keep if
needed in future. It’s necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need
to take it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the European Community
Directives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufac-
turer will not take responsibility for the damage due to any disregard of the
information provided in this manual and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure
pan and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the xture to any
ammable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect
to any other wrong power. Disconnect the device from main power before
open the shield or maintenance.

--0.5m
p. 5ION 3715Z
ENGLISH VERSION

The device is designed only for indoor usage, pls keep it away from moisture.
Do not expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the
light may trigger epileptic seizures in photosensitive persons or persons with
epilepsy. Especially at beam eect, extreme caution and observance of these
safety instructions is mandatory.
Don’t put or install the device on a surface that subject to vibration or bumps.
Ta=45ºC The device is supposed to work in the temperate range -15° C and +45° C, do
not use the device when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the
device when the shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the
bottom of the device to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly
for transportation.
p. 6ION 3715Z
ENGLISH VERSION

Maintenance
Operation only allowed to qualied person, damages due to
unprofessional operation or remove of any parts inside will
not be considered in warranty service. There are no service-
able parts inside the device or package, service only leaves to
authorized dealers.
Never allow the optical components contact with oil, fat or
any other liquid.
A regular clearance of the device is needed for long-term us-
age, this is very helpful to maintain the lifetime and bright-
ness need to use a so and lint-free cloth to clean the optical
system, fan and air owing tunnel.
Trouble Shooting
Problems Possible reasons Checking or solutions
Device not power up
Powercon or power cable
damaged Change a good power cable to try
Faulty power supply Replace new power supply
Pan/Tilt error or vibrate
Faulty Pan/Tilt PCB Replace PT001 PCB
Faulty opto sensor Replace opto sensor OP001
Cable loosen Check the cable connect to OP001
LED o
Temperature protection Check the temperature from menu
Fan not working Check the fan speed info from menu
Faulty LED Replace new LED
Dimmer and strobe set at 0 Set dimmer and strobe channel at 255
Faulty power supply Replace new power supply
Device not response
to DMX
Faulty communication IC Replace the IC with back-up one in the display PCB
Faulty display PCB Replace new display PCB
Wrong DMX addressing Check the address and setting
Faulty DMX cable Change to a good DMX cable
Replacement of the fuse
Need to replace with same type and rating, which originally
installed in the device.
• Step One: Unplug power cable from main power.
• Step Two: Unscrew the fuse holder out of the housing
with a screwdriver.
• Step Three: Remove the broken fuse and replace with an
exact same type of new fuse.
• Step Four: Insert the fuse holder back to the housing and
screw tight and reconnect power.
p. 7ION 3715Z
ENGLISH VERSION

Installation
The device could be either put on a solid and even Surface, or
mounted upside down or sideways like le picture.
The mounting place must be suicient stable and be able to
support a weight of 10 times of the unit’s weight. When the
xture is hanged, always additionally secure the device with
the safety chain, fasten the safety rope at a suitable position
so that the maximum fall of the projector will be 20 cm
How to do mounting installation
Step three: Install the whole device onto appropri-
ate truss and fasten the clamps, tight the safety rope
with the truss or other xing point at a suitable posi-
tion that drop down distance not exceed 20 cm.
Step two: Install the clamp and bracket on the bot-
tom of panel, fasten the quick-locks;
Step one: Installation the clamp onto the omega
bracket;
p. 8ION 3715Z
ENGLISH VERSION

Control menu
Meaning of the icon in menu
Menu tree
Default setting shadowed. Mark with 1. Can be basic reload-
ed, 2. Be program reloaded, 3. Can be private reloaded.
CONNECT LIGHT INFOMATION SET PROGRAM
Con-
nect
DMX Address①XXX DMX address seng
Wireless①Wireless Enabled
Light
Max Tempera-
ture①80~139℃, 90℃/176~282℉, 194℉Lamp o if temperature connuously over for 5 minutes
Lamp Adjust①PAN…… Adjust value of each channels
Informaon
Time Info. Current XXXX(Hours) Fixture boot me
Fixture Life XXXX(Hours) Fixture total run me
Temperature Near Lamp Temp (depends on xture) Temperature Sensors
Fans Speed Near Lamp Fan (depends on xture) Fan speed Sensors
Channel Value PAN…… Display value of channel
Error Message Pan,Tilt…… Error channels
Fixture Model xxxxxxxxxxxx Display model brand and model
Soware Ver
1U01 V1.0.00
Version of each IC2U01 V1.0.00
:
p. 9ION 3715Z
ENGLISH VERSION

Set
Reset
All Reset all
Pan&Tilt Reset Pan&Tilt
Others Reset Others
Movment
Pan Reverse①ON/OFF Pan Reverse
Tilt Reverse①ON/OFF Tilt Reverse
Pan Degree①630/540 Choose Pan Degree
Encoders①ON/OFF Encoder wheel on/o
Pan/Tilt Mode①Stand/Smooth Choose pan/lt mode
UI Set
Mic Sens. ③0~99%,60% Sensivity of Mic
No Signal①Close/Hold/Auto/
Music Mode when no signal
Temperature. C/F①Fahrenheit /Celsius Temperature at ℃/℉
Fans Mode①Auto Speed /High
Speed Fans mode
Hibernaon①OFF,
01M~99M，15M Sleeping mode
Backlight①02~60m 02m Show backlight me
Flip Display①ON/OFF Display 180°reverse
Display Bright③00~31 10 Display Brightness
Brand Show①ON/OFF Show brand or not
Key Lock①ON/OFF Key lock on/o
Language①En/简/繁/Fr/Sp Language Select
Users
User Mode①
Standard Standard mode
Extended Extended mode
Basic-8bit Basic-8bit mode
Basic-16bit Basic-16bit mode
User User program mode
Edit User③
Max Channel = XX
Edit users modePAN = CH01
:
Calibraon③-Password- 0Password: 050
Pan.. 0Calibrate channel value
Fixture ID③
Name Name
-Password- Password: 050
PID Code Set PID of RDM
Wireless Set①DMX On Cable ON/OFF DMX Send Out
Reset Connect ON/OFF Reset Connect
Reload Default
Basic Reload(①) ON/OFF Basic Reload
Program Reload(②) ON/OFF Program Reload
---Password--- XXX Password: 050
Private Reload(③) ON/OFF Private Reload
All Reload ON/OFF All Reload
p. 10ION 3715Z
ENGLISH VERSION

Program
Play①
DMX Receive DMX Receive
Slave Receive Slave Receive 1,2,3 Choose slave posion
Sequence Master / Alone Run Sequence
Music Master / Alone Music mode
Select Chase②
Chase Part 1 Chase 1 ~ 8 Chase 1
Select and run auto programChase Part 2 Chase 1 ~ 8 Chase 2
Chase Part 3 Chase 1 ~ 8 Chase 3
Edit Chase②
Chase 1 Chase Test Test
: Step 01 0 Beginning scene
Chase 8 Step 64 0 Ending scene
Edit Scenes②
Edit Scene 001 Pan,Tilt,…… 0 Input manual scene
~ Edit Scene 250 --Fade Time-- 0 Modify manually fading me
--Secne Time-- 0 Modify manually scene me
DMX Input Input scene from exterior controller
Scenes Record ScXX=>ScXX Auto Input scenes
p. 11ION 3715Z
ENGLISH VERSION

DMX connection and DMX protocol
DMX addressing
The device is controlled by universal DMX 512 protocol, DMX
address is the start channel used to receive instructions from
the external controller. For independent control, each xture
must be assigned its unique address control channels. For ex-
ample, this device has four channel modes: 19/41/170/19/21,
if we set the mode at standard 19 channels mode, and there
are several models need to be independently controlled, we
just simply address rst xture at 1, and second xture at 20,
third one at 39, etc.
If the devices have the same address, they will behave
synchronically.
DMX addressing is limited, don’t set the address so high that
without enough control channels for the xtures.
Display is ashing when no DMX signal is received.
Connection: use DMX cable with 5 pin XLR-plugs to connect the
controller with the xture or one xture with another.
p. 12ION 3715Z
ENGLISH VERSION

DMX chart
Channel name function Min DMX Max DMX
St Ex1 Ex2 Ba1 Ba2
1 1 1 1 1 Pan Pan Coarse 0 255
2 2 2 Pan ne Pan Fine 0 255
2 3 3 2 3 Tilt Tilt Coarse 0 255
4 4 4 Tilt ne Tilt Fine 0 255
3 5 5 3 5 Movment Speed fastest to Slowest 0 255
6 6 Movment Function
Normal 0 15
Movement With Backout 16 31
TBD 32 255
4 7 7 4 6 Shutter Function
Normal Shutter Functions 0 15
Pulse-eect Forward 16 31
Pulse-eect Reverse 32 47
Random Strobe 48 63
TBD 64 255
5 8 8 5 7 Shutter
Normal Shutter Functions
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Forward
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Reverse
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Random Strobe
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
6 9 9 6 8 Dimmer Dimmer(0->100%) 0 255
7 10 10 7 9 Virtual Color Func-
tion
On Function 0 15
CTC Function 16 31
Forward Spin 32 47
Reverse Spin 48 63
Continuous 64 79
Color Bounce 80 111
TBD 112 255
p. 13ION 3715Z
ENGLISH VERSION

8 11 11 8 10 Virtual Color1
CTC Function
Colour Temperature Correction
2000K->2700K 0 223
White 3200K 224 231
White 4200K 232 239
White 5600K 240 247
White 8000K 248 255
Forward Spin
Rainbow Eect (Slow->Fast) 0 255
Reverse Spin
Rainbow Eect (Slow->Fast) 0 255
Continuous & Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=full,White=0 5 46
Red=0, Green=full,Blue->down,White=0 47 88
Red->up, Green=full,Blue=0,White=0 89 130
Red=full, Green->down,Blue=0,White=0 131 172
Red=full, Green=0,Blue->up,White=0 173 214
Red->down, Green=0,Blue=full,White=0 215 255
9 12 12 9 11 Virtual Color2(Only
On Color Bounce)
Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=full,White=0 5 46
Red=0, Green=full,Blue->down,White=0 47 88
Red->up, Green=full,Blue=0,White=0 89 130
Red=full, Green->down,Blue=0,White=0 131 172
Red=full, Green=0,Blue->up,White=0 173 214
Red->down, Green=0,Blue=full,White=0 215 255
10 13 13 10 12 Red-All Red 0->100% 0 255
11 14 14 11 13 Green-All Green 0->100% 0 255
12 15 15 12 14 Blue-All Blue 0->100% 0 255
13 16 16 13 15 White-All White 0->100% 0 255
14 17 17 14 16 Zoom Big angle -> Small angle 0 255
15 18 18 15 17 Foreground No Function 0 15
Foreground Color 16 255
16 19 19 16 18 Background No Function 0 15
Background color 16 255
Channel name function Min DMX Max DMX
St Ex1 Ex2 Ba1 Ba2
p. 14ION 3715Z
ENGLISH VERSION

17 20 20 17 19 Pattern
On Pattern 0 12
Pattern control 13 25
Pattern Eect 1~18 26 255
18 21 21 18 20 Pattern Speed
Pattern control
Picture Eect 0 255
Pattern Eect
Slow-> Fast 0 255
22
Pattern Direct access to Pattern of LED 1&LED 2 0 255
Byte 1
Bit 0 Bit0=Led1 Red Switch 0 1
Bit 1 Bit1=Led1 Green Switch 0 2
Bit 2 Bit2=Led1 Blue Switch 0 4
Bit 3 Bit3=Led1 White Switch 0 8
Bit 4 Bit4=Led2 Red Switch 0 16
Bit 5 Bit5=Led2 Green Switch 0 32
Bit 6 Bit6=Led2 Blue Switch 0 64
Bit 7 Bit7=Led2 White Switch 0 128
23 Pattern Direct access to Pattern of LED 3&LED 4 0 255
Byte 2
24 Pattern Direct access to Pattern of LED 5&LED 6 0 255
Byte 3
25 Pattern Direct access to Pattern of LED 7&LED 8 0 255
Byte 4
26 Pattern Direct access to Pattern of LED 9&LED 10 0 255
Byte 5
27 Pattern Direct access to Pattern of LED 11&LED 12 0 255
Byte 6
28 Pattern Direct access to Pattern of LED 13&LED 14 0 255
Byte 7
29 Pattern Direct access to Pattern of LED 15&LED 16 0 255
Byte 8
30 Pattern Direct access to Pattern of LED 17&LED 18 0 255
Byte 9
Channel name function Min DMX Max DMX
St Ex1 Ex2 Ba1 Ba2
p. 15ION 3715Z
ENGLISH VERSION

31 Pattern Direct access to Pattern of LED 19&LED 20 0 255
Byte 10
32 Pattern Direct access to Pattern of LED 21&LED 22 0 255
Byte 11
33 Pattern Direct access to Pattern of LED 23&LED 34 0 255
Byte 12
34 Pattern Direct access to Pattern of LED 25&LED 26 0 255
Byte 13
35 Pattern Direct access to Pattern of LED 27&LED 28 0 255
Byte 14
36 Pattern Direct access to Pattern of LED 29&LED 30 0 255
Byte 15
37 Pattern Direct access to Pattern of LED 31&LED 32 0 255
Byte 16
38 Pattern Direct access to Pattern of LED 33&LED 34 0 255
Byte 17
39 Pattern Direct access to Pattern of LED 35&LED 36 0 255
Byte 18
40 Pattern Direct access to Pattern of LED 37 0 255
Byte 19
22 Red Pixel 1 Led O 0 127
Led On 128 255
23 Green Pixel 1 Led O 0 127
Led On 128 255
24 Blue Pixel 1 Led O 0 127
Led On 128 255
25 White Pixel 1 Led O 0 127
Led On 128 255
:
Channel name function Min DMX Max DMX
St Ex1 Ex2 Ba1 Ba2
p. 16ION 3715Z
ENGLISH VERSION

165 Red Pixel 37 Led O 0 127
Led On 128 255
167 Green Pixel 37 Led O 0 127
Led On 128 255
168 Blue Pixel 37 Led O 0 127
Led On 128 255
169 White Pixel 37 Led O 0 127
Led On 128 255
19 41 170 19 21 Control
Normal 0 7
Reset All 8 15
Pan&Tilt Reset 16 23
TBD 24 47
Other Reset 48 55
Display O 56 63
Display On 64 71
TBD 72 79
TBD 80 87
Hibernation 88 95
TBD 96 255
Channel name function Min DMX Max DMX
St Ex1 Ex2 Ba1 Ba2
p. 17ION 3715Z
ENGLISH VERSION

Unique Features
RDM, stand for “Remote Device Management”, with this func-
tion, users can realize remote control of the device, such as
remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before le factory to distinguish from each
other, usually not suggest users change this code freely.
Soware upgrade function via DMX cable, if there is any new
rmware for this device come out, it can be upgraded simply
via a soware upgrade box, no need to change any mechanical
parts. The upgrade box is not included in the package, if need
any further assistance pls just contact authorized dealers.
Hibernation, the device will enter sleeping mode if activated
aer a period of disconnecting DMX signal to save the pow-
er consumption, and will return immediately as soon as the
DMX signal is sent again.
Display back-up communication IC, there is a back-up com-
munication IC installed in the display PCB, so users could re-
place at once if the working one is broken, no need to wait
long time from service.
Display ip, by press up and down button for more than 3
seconds, the display will ip automatically, this function is
useful to read menu conveniently when device is hanged.
Dimensions Drawing
p. 18ION 3715Z
ENGLISH VERSION

p. 19ION 3715Z
VERSIÓN ESPAÑOL
Descripción
Ion 3715Z es un cabezal móvil versátil que tiene 37 LEDs OS-
RAM® 4-en-1 de 15W con un ángulo de zoom variable de 6º a
50º. Con la capacidad de acción que le da su amplia varia-
ción del haz, el control pixel por pixel y el destacado diseño
de sus ópticas, la versatilidad y la potencia cobran un nuevo
signicado en este equipamiento. Con su tecnología LED de
cuatro colores, por otra parte, el equipo habilita una mezcla
RGBW suave sin sombras multicolor. La unidad viene además
con programas preestablecidos en temperaturas de color de
2700K, 3200K, 4200K, 5600K y 8000K. Ion 3715Z no solo es un
cabezal beam y wash con pixel mapping sino que además
cuenta con la velocidad y la capacidad de reacción de los
cabezales más compactos de la industria.
Especicaciones
Fuente & Ópticas
Fuente de luz: 37 LEDs 4-en-1 OSRAM® de 15W
Vida útil promedio: 60,000 horas
Ángulo de haz: 6° a 50°
Información fotométrica
Flujo lumínico: 8000 lumen
6º Ángulo de haz: 30440 lux @ 3m (10 pies)
50º Ángulo de haz: 5200 lux @ 3m (10 pies)
Efectos y Funciones
Pixel mapping: Control pixel por pixel
Dimmer: Rango completo 0-100%
Efecto estrobo
Tecnología LED 4-en-1: Mezcla RGBW suave sin sombras
Colores vividos, saturados e uniformes
Preseteos de temperatura de color: 2700K, 3200K, 4200K,
5600K & 8000K
Control
Canales DMX: 19/21/41/170
DMX inalámbrico (opcional)
Función RDM avanzada
Indica temperatura de la base, brazo & lámpara.
Comunicación de respaldo IC
Lectura de voltaje RDM, consumo de corriente actual de la
lámpara
Actualización soware vía DMX
Velocidad del ventilador acorde a la temperatura
Movimiento
Pan: 540° / 630º
Tilt: 265°
Motor de 3 fases
Resolución de 16-bit
Reposicionamiento automático
Eléctrico
Rango de voltaje de entrada: 100–240V, 50-60Hz
Alimentación: Rango automático
Consumo máximo de potencia: 316W
Físico
Conectores DMX: 2 conectores XLR (XLR-5 de entrada & salida)
Conectores de alimentación: PowerCON® Entrada/Salida
Display LCD de 2.4 pulg.
Dimensiones: 444x250x506 mm. / 17.5x9.8x19.9 pulg.
Peso: 17 Kg. / 37.4 Lb.

Por su propia seguridad, por favor lea atentamente el
manual antes de utilizar el equipo.
ADVERTENCIA DE SEGURIDAD
• Este producto debe ser instalado por un profesional
calicado.
• Toda mantención debe ser llevada a cabo por un electr-
icista calicado.
• Una distancia mínima de 0.5m debe ser mantenida entre
el equipo y cualquier supercie combustible.
• El producto debe ser siempre operado en áreas ventiladas.
• NO mire de forma directa hacia la fuente de luz.
• Siempre desconecte el equipo antes de realizar cualqui-
er tipo de mantención.
• El neutro debe estar siempre conectado a tierra.
• Asegúrese que todas las partes del equipo se mantengan
limpias y libres de polvo.
IMPORTANTE
• Toda persona involucrada con las instalación, operación
y mantenimiento del equipamiento debe estar calica-
da para ello.
• Seguir las instrucciones de este manual.
• Considerar este manual parte del producto.
• Mantener este manual durante toda la vida útil del producto.
• Pasar el presente manual a cada uno de los futuros
dueños de la unidad.
• Descargar la última versión disponible del sitio de inter-
net de la empresa.
DETERMINACIONES DE OPERACIÓN
• Este producto solamente puede ser operado en un volta-
je de 100-240 V, 50/60 Hz.
• Este equipamiento está diseñado para uso profesional.
Por ejemplo: escenarios, clubs, bares y teatros.
• No agite el equipo. Evite la fuerza bruta al instalar o hac-
er funcionar el dispositivo.
• Al elegir el lugar de la instalación, por favor asegúrese de
que el dispositivo no está expuesto a calor extremo, hume-
dad o polvo. No debe haber ningún cable por ahí. Por favor,
asegúrese de que la unidad no puede ser tocada ni golpeada.
• Al usar máquinas de humo, asegúrese de que el dispos-
itivo no está expuesto al chorro de directo de la máqui-
na y de que sea instalado a una distancia mínima de 0,5
metros entre la máquina de humo y el dispositivo.
• La temperatura ambiente debe estar siempre entre -15
° C y + 45 ° C. Mantener alejado del sol directo (especial-
mente en el coche) y calentadores.
• Nunca utilice este dispositivo durante tormentas eléctri-
cas. El Sobre-voltaje podría destruir el dispositivo. Siem-
pre desconecte el aparato durante tormentas eléctricas.
• El equipo sólo se debe instalar sobre una supercie no
inamable. Con el n de salvaguardar la ventilación su-
ciente, deje 50 cm de espacio libre alrededor del aparato.
• Por instalar el equipo encima de la cabeza (altura de
montaje> 100 cm), siempre je el aparato con una cuer-
da de seguridad apropiada. Fijar la cuerda de seguridad
sólo en los puntos de jación correctos. La seguridad de
la cuerda no debe jarse en las asas de transporte.
• Opere el equipo solamente luego de haber comprobado
que el recinto del mismo está bien cerrado y con todos
los tornillos bien apretados.
• Haga funcionar el aparato sólo después de familiarizarse
con sus funciones. No permitir la utilización por parte
de personas no calicadas para operar el dispositivo. La
mayoría de los daños son el resultado de una operación
poco profesional.
• Por favor, considere que las modicaciones no autorizadas
del aparato están prohibidas por razones de seguridad.
• Nunca quite el código de barras de serie del dispositivo
ya que esto haría que la garantía pierda vigencia.
p. 20ION 3715Z
VERSIÓN ESPAÑOL