TECshow Ion 715Z User manual

ION 715Z
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR

p. 2ION 715Z
ENGLISH VERSION
Overview
Ion 715Z is a versatile moving head powered by 4 x 4-in-1 OS-
RAM® 15W LEDs with a variable zoom that goes from 10º to
60º. Versatility and power output get new meanings thanks
to the enormous action capacity brought by its beam angle
variation, the dazzling LED patterns included and the high-
lighted optics design. This moving head is equipped with
quad-color LED technology, enabling a smooth RGBW mix
with no multicolor shadows. The unit comes also with preset
programs on 2700K, 3200K, 4200K, 5600K and 8000K color
temperatures. Thanks to its versatility, agility and velocity,
Ion 715Z makes everything possible.
Specications
Source & Optics
Light Source: 7 x 4-in-1 OSRAM® 15W LEDs
LEDs life: 60,000 hours
Beam angle: 10° to 60°
Photometric data
Luminous ux: 3500 lumen
10º beam angle: 9700 lux @ 3m (10 .)
60º beam angle: 745 lux @ 3m (10 .)
Eects and functions
LED Patterns: Dazzling LED Patterns included
Dimmer: Full range 0-100%
Strobe eect
Quad-color LED technology: Smooth RGBW mix with no multi
colored shadows
Vivid, saturated and uniform colors
Color temperature presets: 2700K, 3200K, 4200K, 5600K &
8000K
Control
DMX Channels: 18/19/20
Wireless DMX (optional)
Advanced RDM Function
Indicated temperature for base, arm & lamp
IC backup communication
RDM read voltage, current power consumption of the lamp
Soware update vía DMX
Fan speed based on temperature
Movement
Pan: 540° / 630º
Tilt: 265°
3-phase motor
16-bit resolution
Auto repositioning
Electrical
Input voltage range: 100–240V, 50-60Hz
Power Supply: Automatic range
Max. power consumption: 125W
Physical
DMX Connectors: 2 XLR connectors (XLR-3 input & output)
Power supply connectors: PowerCON® In/Out
2.4 inches LCD graphic display
Dimensions: 249x179x369 mm. / 9.8x7x14.5 in.
Weight: 6 Kg. / 13.2 Lbs.

• All maintenance must be carried out by a qualied
electrician.
• A minimum distance of 0.5m must be maintained between
the equipment and a combustible surface.
• The product must always be operated in a well ventilated area.
• DO NOT stare directly into the light source.
• Always disconnect the power before carrying out any
maintenance.
• The earth must always be connected to the ground.
• Ensure that all parts of the equipment are kept clean and
free of dust.
IMPORTANT
Every person involved with the installation, operation
and maintenance of this device has to be qualied.
• Follow the instructions of this manual.
• Consider this manual to be part of the total product.
• Keep this manual for the entire service life of the product.
• Pass this manual on to every further owner or user of
the product
• Download the latest version of the user manual from
the Internet.
OPERATING DETERMINATIONS
• This product is only allowed to be operated with an al-
ternating voltage of 100-240 V, 50/60 Hz.
• This device is designed for professional use, e.g. on stag-
es, in clubs, bars, theatres etc.
• Do not shake the device. Avoid brute force when install-
ing or operating the device.
• When choosing the installation-spot, please make
sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables ly-
ing around. Please make sure that the unit cannot be
touched or bumped.
• When using smoke machines, make sure that the de-
For your own safety, please read this user manual careful-
ly before you initially start-up.
SAFETY WARNING
vice is never exposed to the direct smoke jet and is in-
stalled in a distance of 0.5 meters between smoke ma-
chine and device.
• The ambient temperature must always be between -15°
C and +45° C. Keep away from direct insulation (particu-
larly in cars) and heaters.
• Never use the device during thunderstorms. Over volt-
age could destroy the device. Always disconnect the de-
vice during thunderstorms.
• The device must only be installed on a non-amma-
ble surface. In order to safeguard suicient ventilation,
leave 50 cm of free space around the device.
• For overhead use (mounting height >100 cm), always
x the xture with an appropriate safety-rope. Fix the
safety-rope at the correct xation points only. The safe-
ty-rope must never be xed at the transport handles!
• Only operate the xture aer having checked that the
housing is rmly closed and all screws are tightly fastened.
• Operate the device only aer having become familiarized
with its functions. Do not permit operation by persons
not qualied for operating the device. Most damages are
the result of unprofessional operation!
• Please consider that unauthorized modications on the
device are forbidden due to safety reasons!
• Never remove the serial barcode from the device as this
would make the guarantee void.
p. 3ION 715Z
ENGLISH VERSION

8. Wireless indicator
9. Mic
10. Le button
11. Enter button
12. Down button
13. Up button
14. Right button
15. Fuse holder
16. Powercon in
17. Power switch
18. Powercon out
19. 3-pin DMX out
20. 3-pin DMX in
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button
Description of the Device
p. 4ION 715Z
ENGLISH VERSION

Safety and maintenance Information
Before operate this unit, please carefully read this users guide and keep if
needed in future. It’s necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need
to take it to special company for recycling or return to authorized dealer.
The products referred to in this manual conform to the European Community
Directives and are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufac-
turer will not take responsibility for the damage due to any disregard of the
information provided in this manual and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure
pan and tilt can rotate in its complete range.
Pls make sure minimal 0.5m distance need to kept between the xture to any
ammable material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect
to any other wrong power. Disconnect the device from main power before
open the shield or maintenance.

--0.5m
p. 5ION 715Z
ENGLISH VERSION

The device is designed only for indoor usage, pls keep it away from moisture.
Do not expose the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the
light may trigger epileptic seizures in photosensitive persons or persons with
epilepsy. Especially at beam eect, extreme caution and observance of these
safety instructions is mandatory.
Don’t put or install the device on a surface that subject to vibration or bumps.
Ta=45ºC The device is supposed to work in the temperate range -15° C and +45° C, do
not use the device when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the
device when the shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the
bottom of the device to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly
for transportation.
p. 6ION 715Z
ENGLISH VERSION

Maintenance
Operation only allowed to qualied person, damages due to
unprofessional operation or remove of any parts inside will
not be considered in warranty service. There are no service-
able parts inside the device or package, service only leaves to
authorized dealers.
Never allow the optical components contact with oil, fat or
any other liquid.
A regular clearance of the device is needed for long-term us-
age, this is very helpful to maintain the lifetime and bright-
ness need to use a so and lint-free cloth to clean the optical
system, fan and air owing tunnel.
Trouble Shooting
Problems Possible reasons Checking or solutions
Device not
power up
Powercon or power cable damaged Change a good power cable to try
Faulty power supply Replace new power supply
Pan/Tilt error
or vibrate
Faulty Pan/Tilt PCB Replace PT001 PCB
Faulty opto sensor Replace opto sensor OP001
Cable loosen Check the cable connect to OP001
LED o
Temperature protection Check the temperature from menu
Fan not working Check the fan speed info from menu
Faulty LED Replace new LED
Dimmer and strobe set at 0 Set dimmer and strobe channel at 255
Faulty power supply Replace new power supply
Device not
response to
DMX
Faulty communication IC Replace the IC with back-up one in the display PCB
Faulty display PCB Replace new display PCB
Wrong DMX addressing Check the address and setting
Faulty DMX cable Change to a good DMX cable
Replacement of the fuse
Need to replace with same type and rating, which originally
installed in the device.
Step One: Unplug power cable from main power.
Step Two: Unscrew the fuse holder out of the housing with
a screwdriver.
Step Three: Remove the broken fuse and replace with an ex-
act same type of new fuse.
Step Four: Insert the fuse holder back to the housing and
screw tight and reconnect power.

Installation
The device could be either put on a solid and even Surface, or
mounted upside down or sideways like le picture.
The mounting place must be suicient stable and be able to
support a weight of 10 times of the unit’s weight. When the
xture is hanged, always additionally secure the device with
the safety chain, fasten the safety rope at a suitable position
so that the maximum fall of the projector will be 20 cm.
How to do mounting installation.
Step three: Install the whole device onto appropri-
ate truss and fasten the clamps, tight the safety rope
with the truss or other xing point at a suitable posi-
tion that drop down distance not exceed 20 cm.
Step two: Install the clamp and bracket on the bot-
tom of panel, fasten the quick-locks;
Step one: Installation the clamp onto the omega
bracket;
p. 8ION 715Z
ENGLISH VERSION

Control menu
Meaning of the icon in menu
Menu tree
Default setting shadowed. Mark with 1. Can be basic reload-
ed, 2. Be program reloaded, 3. Can be private reloaded.
CONNECT LIGHT INFOMATION SET PROGRAM
Con-
nect
DMX Ad-
dress① XXX DMX address seng
Light
Max Tempera-
ture① 80~139℃,90℃/176~282℉,194℉Lamp o if temperature connuously over for 5 minutes
Lamp Adjust① PAN…… Adjust value of each channels
Informaon
Time Info. Current XXXX(Hours) Fixture boot me
Fixture Life XXXX(Hours) Fixture total run me
Temperature Near Lamp Temp (depends on xture) Temperature Sensors
Fans Speed Near Lamp Fan (depends on xture) Fan speed Sensors
Channel Value PAN…… Display value of channel
Error Message Pan,Tilt…… Error channels
Fixture Model xxxxxxxxxxxx Display model brand and model
Soware Ver
1U01 V1.0.00
Version of each IC
2U01 V1.0.00
:
p. 9ION 715Z
ENGLISH VERSION

Set
Reset
All Reset all
Pan&Tilt Reset Pan&Tilt
Others Reset Others
Movment
Pan Reverse① ON/OFF Pan Reverse
Tilt Reverse① ON/OFF Tilt Reverse
Pan Degree① 630/540 Choose Pan Degree
Encoders① ON/OFF Encoder wheel on/o
Pan/Tilt Mode① Stand/Smooth Choose pan/lt mode
UI Set
Mic Sens. ③ 0~99%,60% Sensivity of Mic
No Signal① Close/Hold/Auto/Music Mode when no signal
Temperature. C/F① Fahrenheit /Celsius Temperature at ℃/℉
Fans Mode① Auto Speed /High Speed Fans mode
Hibernaon①OFF, 01M~99M，15M Sleeping mode
Backlight①02~60m 02m Show backlight me
Flip Display①ON/OFF Display 180°reverse
Display Bright③00~31 10 Display Brightness
Brand Show①ON/OFF Show brand or not
Key Lock①ON/OFF Key lock on/o
Language①En/简/繁/Fr/Sp Language Select
Users
User Mode①
Standard Standard mode
Extended Extended mode
Basic-8bit Basic-8bit mode
Basic-16bit Basic-16bit mode
User User program mode
Edit User③
Max Channel = XX
Edit users mode
PAN = CH01
:
Calibraon③ -Password- 0Password: 050
Pan… 0 Calibrate channel value
Fixture ID③
Name Name
-Password- Password: 050
PID Code Set PID of RDM
Reload Default
Basic Reload(①) ON/OFF Basic Reload
Program Reload(②) ON/OFF Program Reload
---Password--- XXX Password: 050
Private Reload(③) ON/OFF Private Reload
All Reload ON/OFF All Reload
p. 10ION 715Z
ENGLISH VERSION

Program
Play①
DMX Re-
ceive DMX Receive
Slave Re-
ceive Slave Receive 1,2,3 Choose slave posion
Sequence Master / Alone Run Sequence
Music Master / Alone Music mode
Select Chase②
Chase Part 1 Chase 1 ~ 8 Chase 1
Select and run auto programChase Part 2 Chase 1 ~ 8 Chase 2
Chase Part 3 Chase 1 ~ 8 Chase 3
Edit Chase②
Chase 1 Chase Test Test
:Step 01 0 Beginning scene
Chase 8 Step 64 0 Ending scene
Edit Scenes②
Edit Scene
001 Pan,Tilt,…… 0Input manual scene
~ Edit Scene
250 --Fade Time-- 0 Modify manually fading me
--Secne Time-- 0 Modify manually scene me
DMX Input Input scene from exterior controller
Scenes Record ScXX=>ScXX Auto Input scenes
p. 11ION 715Z
ENGLISH VERSION

DMX connection and DMX protocol
DMX addressing:
The device is controlled by universal DMX 512 protocol, DMX
address is the start channel used to receive instructions from
the external controller. For independent control, each xture
must be assigned its unique address control channels. For
example, this device has four channel modes: 19/50/18/20,
if we set the mode at standard 19 channels mode, and there
are several models need to be independently controlled, we
just simply address rst xture at 1, and second xture at 20,
third one at 39, etc.
If the devices have the same address, they will behave syn-
chronically.
DMX addressing is limited, don’t set the address so high that
without enough control channels for the xtures.
Display is ashing when no DMX signal is received.
Connection: use DMX cable with 3-pin XLR-plugs to connect the
controller with the xture or one xture with another.
p. 12ION 715Z
ENGLISH VERSION

DMX chart
Channel name function Min DMX Max DMX
St Ex Ba1 Ba2
1 1 1 1 Pan Pan Coarse 0 255
2 2 Pan ne Pan Fine 0 255
2 3 2 3 Tilt Tilt Coarse 0 255
4 4 Tilt ne Tilt Fine 0 255
3 5 3 5 Movment Speed fastest to Slowest 0 255
6Movment Func-
tion
Normal 0 15
Movement With Backout 16 31
TBD 32 255
4 7 Shutter Function
Normal Shutter Functions 0 15
Pulse-eect Forward 16 31
Pulse-eect Reverse 32 47
Random Strobe 48 63
TBD 64 255
5 8 Shutter
Normal Shutter Functions
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Forward
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Reverse
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
Random Strobe
Close 0 31
Strobe Rate (slow to fast) 32 223
Open 224 255
4 6 Shutter
Shutter closed 0 31
No function (shutter open) 32 63
Strobe eect slow to fast 64 95
No function (shutter open) 96 127
Pulse-eect in sequences 128 159
No function (shutter open) 160 191
Random strobe eect slow to fast 192 223
No function (shutter open) 224 255
6 9 5 7 Dimmer Dimmer(0->100%) 0 255
p. 13ION 715Z
ENGLISH VERSION

7 10 6 8 Virtual Color
Function
On Function 0 15
CTC Function 16 31
Forward Spin 32 47
Reverse Spin 48 63
Continuous 64 79
Color Bounce 80 111
TBD 112 255
8 11 7 9 Virtual Color1
CTC Function
Colour Temperature Correction 2000K->2700K 0 223
White 3200K 224 231
White 4200K 232 239
White 5600K 240 247
White 8000K 248 255
Forward Spin
Rainbow Eect (Slow->Fast) 0 255
Reverse Spin
Rainbow Eect (Slow->Fast) 0 255
Continuous & Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=full,White=0 5 46
Red=0, Green=full,Blue->down,White=0 47 88
Red->up, Green=full,Blue=0,White=0 89 130
Red=full, Green->down,Blue=0,White=0 131 172
Red=full, Green=0,Blue->up,White=0 173 214
Red->down, Green=0,Blue=full,White=0 215 255
9 12 8 10
Virtual Col-
or2(Only On Color
Bounce)
Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=full,White=0 5 46
Red=0, Green=full,Blue->down,White=0 47 88
Red->up, Green=full,Blue=0,White=0 89 130
Red=full, Green->down,Blue=0,White=0 131 172
Red=full, Green=0,Blue->up,White=0 173 214
Red->down, Green=0,Blue=full,White=0 215 255
10 13 9 11 Red-All Red 0->100% 0 255
11 14 10 12 Green-All Green 0->100% 0 255
12 15 11 13 Blue-All Blue 0->100% 0 255
13 16 12 14 White-All White 0->100% 0 255
Channel name function Min DMX Max DMX
St Ex Ba1 Ba2
p. 14ION 715Z
ENGLISH VERSION

14 17 13 15 Zoom small angle -> Big angle 0 255
15 18 14 16 Foreground No Function 0 15
Foreground Color 16 255
16 19 15 17 Background No Function 0 15
Background color 16 255
17 20 16 18 Pattern
On Pattern 0 15
Pattern control 16 31
Pattern Eect 1~14 32 255
18 21 17 19 Pattern Speed
Pattern control
Picture Eect 1-250 3 252
Pattern Eect
Slow-> Fast 0 255
Pattern Direct access to Pattern of LED 1&LED 2 0 255
Byte 1
Bit 0 Bit0=Led1 Red Switch 0 1
Bit 1 Bit1=Led1 Green Switch 0 2
Bit 2 Bit2=Led1 Blue Switch 0 4
Bit 3 Bit3=Led1 White Switch 0 8
Bit 4 Bit4=Led2 Red Switch 0 16
Bit 5 Bit5=Led2 Green Switch 0 32
Bit 6 Bit6=Led2 Blue Switch 0 64
Bit 7 Bit7=Led2 White Switch 0 128
Pattern Direct access to Pattern of LED 3&LED 4 0 255
Byte 2
Pattern Direct access to Pattern of LED 5&LED 6 0 255
Byte 3
Pattern Direct access to Pattern of LED 7 0 255
Byte 4
22 Red Pixel 1 Led O 0 127
Led On 128 255
23 Green Pixel 1 Led O 0 127
Led On 128 255
24 Blue Pixel 1 Led O 0 127
Led On 128 255
25 White Pixel 1 Led O 0 127
Led On 128 255
:
46 Red Pixel 7 Led O 0 127
Led On 128 255
47 Green Pixel 7 Led O 0 127
Led On 128 255
Channel name function Min DMX Max DMX
St Ex Ba1 Ba2
p. 15ION 715Z
ENGLISH VERSION

48 Blue Pixel 7 Led O 0 127
Led On 128 255
49 White Pixel 7 Led O 0 127
Led On 128 255
19 50 18 20 Control
Normal 0 7
Reset All 8 15
Pan&Tilt Reset 16 23
TBD 24 47
Other Reset 48 55
Display O 56 63
Display On 64 71
TBD 72 79
TBD 80 87
Hibernation 88 95
TBD 96 255
Channel name function Min DMX Max DMX
St Ex Ba1 Ba2
p. 16ION 715Z
ENGLISH VERSION

Unique Features
RDM, stand for “Remote Device Management”, with this func-
tion, users can realize remote control of the device, such as
remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before le factory to distinguish from each
other, usually not suggest users change this code freely.
Soware upgrade function via DMX cable, if there is any new
rmware for this device come out, it can be upgraded simply
via a soware upgrade box, no need to change any mechanical
parts. The upgrade box is not included in the package, if need
any further assistance pls just contact authorized dealers.
Hibernation, the device will enter sleeping mode if activated
aer a period of disconnecting DMX signal to save the pow-
er consumption, and will return immediately as soon as the
DMX signal is sent again.
Display back-up communication IC, there is a back-up com-
munication IC installed in the display PCB, so users could re-
place at once if the working one is broken, no need to wait
long time from service.
Display ip, by press up and down button for more than 3
seconds, the display will ip automatically, this function is
useful to read menu conveniently when device is hanged.
Dimensions Drawing
p. 17ION 715Z
ENGLISH VERSION

p. 18ION 715Z
VERSIÓN ESPAÑOL
Descripción
Ion 715Z es un compacto y versátil cabezal móvil que tiene 7
LEDs OSRAM® 4-en-1 de 15W con un ángulo de zoom variable
de 10º a 60º. Con la capacidad de acción que le da su amplia
variación del haz, la incorporación de deslumbrantes patrones
y el destacado diseño de sus ópticas, la versatilidad y la po-
tencia cobran un nuevo signicado en este equipamiento. Con
su tecnología LED de cuatro colores, por otra parte, el equipo
habilita una mezcla RGBW suave sin sombras multicolor. La
unidad viene además con programas preestablecidos en tem-
peraturas de color de 2700K, 3200K, 4200K, 5600K y 8000K. Ion
715Z es tan versátil como ágil y veloz; todo es posible.
Especicaciones
Fuente & Óptica
Fuente de luz: 7 LEDs 4-en-1 OSRAM® de 15W
Vida útil promedio: 60,000 horas
Ángulo de haz: 10° a 60°
Información fotométrica
Flujo lumínico: 3500 lumen
10º Ángulo de haz: 9700 lux @ 3m (10 pies)
60º Ángulo de haz: 745 lux @ 3m (10 pies)
Efectos y Funciones
Deslumbrantes patrones de LEDs
Dimmer: Rango completo 0-100%
Efecto estrobo
Tecnología LED 4-en-1: Mezcla RGBW suave sin sombras
Colores vividos, saturados e uniformes
Preseteos de temperatura de color: 2700K, 3200K, 4200K,
5600K & 8000K
Control
Canales DMX: 18/19/20
DMX inalámbrico (opcional)
Función RDM avanzada
Indica temperatura de la base, brazo & lámpara.
Comunicación de respaldo IC
Lectura de voltaje RDM, consumo de corriente actual de la
lámpara
Actualización soware vía DMX
Velocidad del ventilador acorde a la temperatura
Movimiento
Pan: 540° / 630º
Tilt: 265°
Motor de 3 facetas
Resolución de 16-bit
Reposicionamiento automático
Eléctrico
Rango de voltaje de entrada: 100–240V, 50-60Hz
Alimentación: Rango automático
Consumo máximo de potencia: 125W
Físico
Conectores DMX: 2 conectores XLR (XLR-3 de entrada & salida)
Conectores de alimentación: PowerCON® Entrada/Salida
Display LCD de 2.4 pulg.
Dimensiones: 249x179x369 mm. / 9.8x7x14.5 pulg.
Peso: 6 Kg. / 13.2 Lbs.

Por su propia seguridad, por favor lea atentamente el
manual antes de utilizar el equipo.
ADVERTENCIA DE SEGURIDAD
• Este producto debe ser instalado por un profesional
calicado.
• Toda mantención debe ser llevada a cabo por un electr-
icista calicado.
• Una distancia mínima de 0.5m debe ser mantenida entre
el equipo y cualquier supercie combustible.
• El producto debe ser siempre operado en áreas ventiladas.
• NO mire de forma directa hacia la fuente de luz.
• Siempre desconecte el equipo antes de realizar cualqui-
er tipo de mantención.
• El neutro debe estar siempre conectado a tierra.
• Asegúrese que todas las partes del equipo se mantengan
limpias y libres de polvo.
IMPORTANTE
• Toda persona involucrada con las instalación, operación
y mantenimiento del equipamiento debe estar calica-
da para ello.
• Seguir las instrucciones de este manual.
• Considerar este manual parte del producto.
• Mantener este manual durante toda la vida útil del producto.
• Pasar el presente manual a cada uno de los futuros
dueños de la unidad.
• Descargar la última versión disponible del sitio de inter-
net de la empresa.
DETERMINACIONES DE OPERACIÓN
• Este producto solamente puede ser operado en un volta-
je de 100-240 V, 50/60 Hz.
• Este equipamiento está diseñado para uso profesional.
Por ejemplo: escenarios, clubs, bares y teatros.
• No agite el equipo. Evite la fuerza bruta al instalar o hac-
er funcionar el dispositivo.
• Al elegir el lugar de la instalación, por favor asegúrese de
que el dispositivo no está expuesto a calor extremo, hume-
dad o polvo. No debe haber ningún cable por ahí. Por favor,
asegúrese de que la unidad no puede ser tocada ni golpeada.
• Al usar máquinas de humo, asegúrese de que el dispos-
itivo no está expuesto al chorro de directo de la máqui-
na y de que sea instalado a una distancia mínima de 0,5
metros entre la máquina de humo y el dispositivo.
• La temperatura ambiente debe estar siempre entre -15
° C y + 45 ° C. Mantener alejado del sol directo (especial-
mente en el coche) y calentadores.
• Nunca utilice este dispositivo durante tormentas eléctri-
cas. El Sobre-voltaje podría destruir el dispositivo. Siem-
pre desconecte el aparato durante tormentas eléctricas.
• El equipo sólo se debe instalar sobre una supercie no
inamable. Con el n de salvaguardar la ventilación su-
ciente, deje 50 cm de espacio libre alrededor del aparato.
• Por instalar el equipo encima de la cabeza (altura de
montaje> 100 cm), siempre je el aparato con una cuer-
da de seguridad apropiada. Fijar la cuerda de seguridad
sólo en los puntos de jación correctos. La seguridad de
la cuerda no debe jarse en las asas de transporte.
• Opere el equipo solamente luego de haber comprobado
que el recinto del mismo está bien cerrado y con todos
los tornillos bien apretados.
• Haga funcionar el aparato sólo después de familiarizarse
con sus funciones. No permitir la utilización por parte
de personas no calicadas para operar el dispositivo. La
mayoría de los daños son el resultado de una operación
poco profesional.
• Por favor, considere que las modicaciones no autorizadas
del aparato están prohibidas por razones de seguridad.
• Nunca quite el código de barras de serie del dispositivo
ya que esto haría que la garantía pierda vigencia.
p. 19ION 715Z
VERSIÓN ESPAÑOL

Descripción de la unidad
8. Indicador inalámbrico
9. Micrófono
10. Tecla de desplazamiento hacia la izquierda
11. Tecla Enter
12. Tecla de desplazamiento hacia abajo
13. Tecla de desplazamiento hacia arriba
14. Tecla de desplazamiento hacia la derecha
15. Portafusibles
16. Powercon entrada
17. Interruptor de encendido.
18. Salida powerCON
19. Salida DMX de 3 pines
20. Entrada DMX In de 3 pins
1. Lentes
2. Cabezal
3. Brazo
4. Base
5. Pantalla
6. Soporte
7. Tecla de operaciones
p. 20ION 715Z
VERSIÓN ESPAÑOL