Rogue R1X Spot QRG EN
2
The Rogue R1X Spot Quick Reference Guide (QRG) has basic product
information such as connection, mounting, menu options, and DMX values.
Downloadthe User Manualfrom www.chauvetprofessional.com for more details.
Theinformation andspecifications contained in this QRG are subject to change
without notice.
•DO NOT open this product. It contains no user-serviceable parts.
•DONOT look atthelightsourcewhentheproductison.
•To eliminate unnecessarywear andimprove itslifespan, duringperiodsof
non-use completely disconnect the product from power via breakeror by
unpluggingit.
•CAUTION: Whentransferring product fromextremetemperature
environments, (e.g. coldtrucktowarm humid ballroom) condensation may
form on the internal electronicsofthe product. To avoidcausinga failure,
allowproduct to fully acclimateto the surroundingenvironment before
connecting it topower.
•CAUTION:Thisproduct’shousingmaybehotwhen lightsareoperating.
•Mount this product in a locationwith adequateventilation,at least
20 in (50 cm) fromadjacentsurfaces.
•DONOT leaveanyflammable material within50cm of thisproduct while
operating or connectedto power.
•USE a safety cable when mounting this product overhead.
•DO NOT operate this product outdoorsor in anylocationwhere dust,
excessive heat, water, or humidity mayaffect it. (IP20)
•DO NOT operate this product if thehousing, lenses, orcablesappear
damaged.
•DO NOT connect this product toa dimmeror rheostat.
•ONLY connect this product to a grounded andprotectedcircuit.
•ONLY use the mounting brackets or thehandles to carrythis product. Do not
carry by the movinghead.
•In the event of a serious operating problem, stop usingimmediately.
•Themaximum ambienttemperatureis113 °F(45°C).Donotoperatethis
product at higher temperatures.
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your
distributor to request support or return a product. From inside the U.S., UK,
Ireland, Mexico, or Benelux,usetheinformationinContact Us
Included
•Neutrik®powerCON®power cord
•
2 Omega brackets with mounting hardware
•Quick ReferenceGuide
RDM (Remote
Device
Management)
Remote Device Management, or RDM,is astandardforallowingDMX-enabled
devicesto communicatebi-directionally alongexistingDMX cabling.Checkthe
DMX controller’sUser Manualorwith the manufacturerasnotallDMX
controllershavethiscapability. TheRogueR1XSpot
allows feedback to make changesto menumapoptions.Downloadthe User
Manual from www.chauvetprofessional.comfor more details.
