TEFAL Express Compact SV7112L3 User manual

1820001996 - 19/19

EN
Summary
USING YOUR APPLIANCE ......................................................................... 53
1.1 Gettingstarted................................................................................ 53
1.2 Filling the water tank.................................................................... 50
1.3 Transportation ................................................................................49
1.4 Settings.............................................................................................. 48
1.5 Vertical steaming ........................................................................... 46
1.6 Auto-o ............................................................................................. 45
MAINTENANCE AND STORAGE.............................................................. 44
2.1 Emptying the calc collector* .....................................................44
2.2 Descaling your generator ........................................................... 43
2.3 Cleaning ............................................................................................40
2.4 Storage ..............................................................................................39
Safety instructions ..................................................................................... 38
TROUBLESHOOTING.................................................................................. 32

55
* Depending on the model
x3
3
x3
x3
x3
STEAMBOOST

54
x3
3
x3
x3
x3
STEAMBOOST
www.Tefal.co.uk www.calor.fr

53
USING YOUR APPLIANCE
1.1 Gettingstarted
• Plug your steam
generator.
• Unlock your steam
generator.
Express Compact is
equipped with a lock
system to hold the iron
onto the base for easy
transport and storage.
• Completely unwind the
power cord and take
the water cord out of its
storage space.
• Fill the water tank with
tap water up to the max
indication. Put the tank
back into the appliance
by pushing in until it
locks into place.

52
USING YOUR APPLIANCE
• Press the «ON-OFF»
button on control panel.
• The «ON-OFF» button
light remain ashing
while the appliance is
warming up.
OK
• To obtain steam, press
the steam trigger under
the iron handle. The
steam will stop when
you release the button.
• The steam generator
is ready for use. The
ECO mode can still be
selected even if the
"ON-OFF" button light
remains ashing. After
2minutes, the light of
the "ECO" or "ON-OFF"
mode remains lit.
ON

51
USING YOUR APPLIANCE
• To obtain even more
steam, press the steam
trigger under the handle
three times in quick
succession for automatic
sequential steam.
x3
3
x3
x3
x3
NO
During ironing, do
not leave the iron on
the soleplate or on
the ush accessory.
It is safe to leave the
iron on the base of the
steam generator or on
the heel.
OK OK
NO
* Depending on model

50
1.2 Filling the
water tank
CLICKCLICK
• Fill it with tap water
without exceeding the
MAX level.
• Push it back into its
housing until you hear a
«click».
• Remove the removable
water tank using the
handle located at the
front of the steam
generator.
• Switch o and unplug
the appliance.
USING YOUR APPLIANCE

49
1.3 Transportation
Your steam generator
is equiped with a lock
system to hold the iron
onto the base for easy
transport and storage.
To transport your steam
generator using the
handle of the iron:
- Put the iron on the
steam generator iron
rest and raise the lock
system over the iron
until it locks into place
(audible click).
- Hold the iron by the
handle to transport
your steam generator.
USING YOUR APPLIANCE

48
USING YOUR APPLIANCE
Changing modes
• To change the settings
use the thermostat that
is on the handle of the
iron.
• When you turn the
thermostat to the
"synthetic" mode, the
temperature decrease.
When you turn the
thermostat to the "linen"
mode, the steam and
temperature increase.
1.4 Settings
• When you press
the "ECO" button,
temperature and steam
decrease.

47
USING YOUR APPLIANCE
• When you press again
the "ECO" button to
remove the mode, the
temperature and steam
increase again.

46
1.5 Vertical
steaming
wool - laine
silk - soie
synth. - synth.
USING YOUR APPLIANCE
As steam is very hot:
never attempt to
remove creases from
a garment while it is
being worn, always
hang garments on a
coat hanger.
• Holding the iron in a
vertical position tilted
slightly forwards, press
on the steam control
button (underneath the
iron handle) moving the
iron from top to bottom.
• Always use the max
mode on the thermostat
for vertical steaming.
• Hang the garment on
a coat hanger and hold
the fabric slightly taut
with one hand.
NO
max.

45
1.6 Auto-o
• The steam generator is
tted with an «AUTO-
OFF» monitoring
system, which is
activated automatically
after approximately 8
minutes without use. The
«ON-OFF» button ashes
to indicate that the
appliance is on standby.
• To reactivate the steam
generator, press the
«ON-OFF» button and
you will hear a bip.
• After approximately 38
minutes of non-use, the
«AUTO-OFF» system
switches o your steam
generator.
• To start your ironing
again, press the
«ON-OFF» button and
you will hear a bip.
8
min
ON
OFF
ON
USING YOUR APPLIANCE
38
min

44
2.1 Emptying the
calc collector*
OFF
1H
1
2
MAINTENANCE AND STORAGE
• Switch o and unplug
the appliance.
• For long lasting steam
performance, feel free to
empty the calc collector
every now and then.
• Fully unlock the collector
and pull it out of the
base unit.
Appliance has to be
unplugged for at least
1h and has cooled
down completely
before being carried
out.
Do not use your steam
generator without
reinserting the calc
collector.
* Depending on model
1
2
*
* *
* *

43
• Move the unit over a sink
and ll the water tank.
• Detach the ush
accessory from the unit’s
base.*
• Set down the accessory
near the sink and place
the iron on top.*
• Put back the water tank
in the base.
• Plug in the unit and
switch it on by pressing
the «On» button.
CLICK
ICK
ICK
CLI
CLI
MAINTENANCE AND STORAGE
OFF
ON
2.2 Descaling your
generator
• The ashing «Anti calc»
indicator light indicates
that descaling is
necessary.
• Switch o the unit
by pressing the «O»
button, then unplug the
unit.
* Depending on model
*
*

42
• An audio signal (long
beep) sounds at the
end of the descaling
procedure.
• The unit will shut down
automatically. You must
then unplug the unit.
• Unlock and remove the
anti-calc collector in the
back of the iron to rinse
it.*
• Next, reposition the
collector, as well as the
ush accessory.*
• Press the blinking
«Anti calc» button for
3seconds.
• The descaling operation
is performed, during
which the iron emits
water and steam for
2minutes. Be aware
of the heat of the iron
during the descaling
cycle.
• If you do not have the
model with the ush
accessory, than hold
your iron above the sink.
MAINTENANCE AND STORAGE
OFF
biiiip
3
sec 2 MIN
*
*

41
MAINTENANCE AND STORAGE
• Please be careful to
empty the water tank
before storing back the
ush accessory.*
* Depending on model
*