Teguar TRT-Q5380-10 User manual

10.1 inch
Full Ruggedized
Tablet
TRT-Q5380-10
User Manual
Preface
Summary:
Hello, respected users, thank you for using our products; in order to familiarize you with the
products more quickly, please refer to the documentation for problems encountered in the use
process. This document mainly introduces the TRT-Q5380-10project fuselage interface and system
usage instructions, through the picture instruction information to enable users to quickly understand

the use of products. When you encounter unsolvable problems in use, please contact our
technicalstaff to deal with them. Thank you for your trust.
Catalog
1. File version information...........................................................................................................3
2. Product External Function Interface Description.................................................................4-5
3. Desktop and Menu Layout....................................................................................................6-8
4. Use warnings:..........................................................................................................................9
File name
TRT-Q5380-10 User Manual
Document number
0002
Edition
V1.0
Issue date
2021-01-19
Page number
Change record
Serial
number
Change number
Edition
Date of change
Change content
Maintenance
department

2.Key Layout and Definitions
○
1Front camera:camera, video
○
3Light sensor：Perception of external pipeline strength, electrical signal to CPU
○
5○
4voice sound +/ voice sound-: increase/reducethe volume

○
6Custom buttons: for customer defined function keys
○
7Power button:to start or close touch screen panel. You can also let the computer
○
8Scan code key: the device equipped with scan code module can be controlled by
this button scan code
○
9Lock hole: used to lock the limited use of equipment
○
10 Earphone Jack: the jack support outputs the audio signal to a loudspeaker or
Headset
○
11 HDMI interface: High-Definition Multimedia, Interface, high definition
multimedia interface
○
12 Micro USB 2.0:data transmission by inserting the micro USB 2.0 interface device
○
13 U handicap:data transmission by inserting the micro USB 2.0 interface device
○
14 Charging interface: charging the tablet via DC adapter
○
15 POGO PIN:Device for connecting base
○
16 Aircraft plug connection: a device for connecting an air connector
○
17 RS232 serial interface: used to connect the device with RS232 serial interface
○
18 Ethernet interface: used to connect Ethernet connections
○
19 Rear camera:camera, video
○
21 One dimensional / two-dimensional code scanning head: the same press the
scan button, activate the scanning head to get the barcode image information
○
22 Fingerprint input sensor: used in the past fingerprint information

3. Desktop and Menu Layout
①Lock screen interface

②Desktop Layout

③system menu

4. Use warnings:

10.1 inch Full Ruggedized Tablet
Model Number:TRT-Q5380-10
FCC ID: 2AL2MTRT-Q5380-10
Made In China
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Anychanges or modifications not expressly approved by the party responsible for
compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned
to provide reasonable protection against harmful interference in aresidential
installation. This equipment generates, uses and can radiate radiofrequency energy
and, if not installed and used in accordance with theinstructions, may cause harmful
interference to radio communications. However,there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user
isencouraged to try to correct the interference by one or more of the
followingmeasures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The devic
e can be used in portable exposure condition without restriction
SAR Statement:
This 10.1 inch Full Ruggedized Tablet meets the government's requirements for
exposure to radio waves. The guidelines are based on standards that were developed
by independent scientific organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety margin designed to
assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg
averaged over one gram of tissue. Device types: 10.1 inch Full Ruggedized Tablet
(FCC ID: 2AL2MTRT-Q5380-10) has also been tested against this SAR limit. This
device was tested for typical body-worn operations with the back of the tablet kept

0mm from the body. To maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 0mm separation distance between the user's body
and the back of the tablet. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 0mm must be maintained between
the user’s body and the tablet, including the antenna. Third-party belt-clips, holsters,
and similar accessories used by this device should not contain any metallic
components. Body-worn accessories that do not meet these requirements may not
comply with RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.
Adapter description:
INPUT: 100-240V~50/60Hz 0.5A OUTPUT:5V DC 3A