tekkiwear T8 User manual

User manual of
Hair Removal Instrument – T8
Thank you for purshasing this product. For convenience, please read and keep this manual carefully before the use.

Product summary
1. Buom descripon
1. Light buon
2. Switch / gear buon.
3. Number of ashes remaining (Digital)
4. Fan
5. Automac connuous light mode
6. Gear display
Principle Exposion
The instrument adopts the internaonal advanced photon cosmec IPL technology, which
directly irradiates the skin with strong pulsed light to produce the photobiochemistry eect. On
the one hand can make the collagen ber and the elasc ber in the skin regenerate, restore the
skin elas-city,and improve the facial microcirculaon and eliminate or lighten the wrinkles. On
the other hand, strong pulsed light can penetrate the skin and be absorbed selecvely by the
pigmented mass and capillaries in the ssue.On the premise of not destroying the normal skin
ssue, heat energy makes the blood coagulaon and pigmented mass destroyed by thermal
decomposion, to treat capillary dilataon, remove color spots, and remove excess hair and so
on.
Use taboo
Important safety informaon-please read before use:
- Refer to the skin type on page 2 [skin color control picture]. If you are VI, DO NOT USE THIS
INSTRUMENT, otherwise it is likely to cause adverse reacons to the skin, such as pigmentaon
and depigmentaon, severe redness and swelling or burning.

I. White, II. Yellow, III. Ligth Brown, IV. Medium Brown, V. Dark Brown, VI. Dark Brown or Darker.
Safety precauons
• Special aenon
• Do not apply any gels or care products (aloe vera gel,etc.) before use. Be sure to assemble and
use the product in accordance with the regulaons contanad the Instrucon Manual.
• Please read the "Instrucon Manual"carefully and keep it for future reference.
• If you have any quesons during use,plcaso contact the online customer service in the required
language.
DANGER: Contents related to personal injury due to incorrect operaon
WARNING: Dangerous content due to incorrect operaon
CAUTiON: Contents related to personal safety or property damage due to incorrect operaon
Warning symbol note: Do not use in the bath or shower.
WARNING: Do not use this product near water-lled bathtubs,shower basins,washbasin or other
water-containing utensils.
Please keep this product and power adapter dry; If the product is damagod,ploaso do not touch
any internal parts to avoid electric shock;
• Do not insert any objects into the product,and do not place the product at will;
• Do not use this product around your eyes.Wearing protecve glasses is a normal operaon that
protects the user.lf you operate around your eyes,protecve glasses may not completely block
the energy,and the light will be absorbed by the iris melanin in your eyes at close range;
• We recommend that you wear protecve glasses every me you use this product. Although
light will not directly aect your eyes, high-frequency ashing light may aect your vision;
• When you need back hair removal,you may need an assistant or partner.This is our rec-
ommendaon,because we are concerned that you may be at risk if you use it alone;
• If your hair is longer than 1 mm, please shave it rst. If the excessive hair absorbs heat on the
skin surface, it will cause skin redness and swelling, and the burnt hair will produce peculiar
smell, which will aect your experience of using the product;
• If the skin in the irradiated area is not dry or clean,it will aect the use eect,and may ause the
product to not ash or accidentally ash;
• We lack data on the use of the product in children under the age of 15,so we recommend at
you take care to prevent children under the age of 15 from contacng the product.and please
stay away from children under the age of 15 when operang the instrument;

• Please use dierent light intensity gears for dierent body parts as their complexions are
dierent;
• If the power cord is damaged,to avoid danger,it must be replaced by a speciaist from the
manufac-turer's maintenance department or similar department.
Warning
• Do not use anperspirants immediately aer exposure to the underarms;
• Please regularly check and clean the dirt on the irradiaon portal to avoid scalding and failure
during use;
• Do not place the irradiaon portal close to the items that are easy to be demagnezed so as
to avoid malfuncon and damage;
• Do not use it when blocking the breather vent,as it may cause sm eke and re;
• Do not point the irradiaon portal toward black objects,to avoid the machine running
abnormally;
• Do not illuminate clothes,hair,and other items to avoid scorching,discoloraon, and damage;
• Do not use on pets to avoid injury;
• Do not use this product around your eyes to avoid eye injury;
• Aer use,please wipe o the hair and skin care products aached to hair removal to void
malfunc-on and skin damage;
• Do not use it near children.Hair removal will emit strong light and easily hurt child' s eyes.
• Please set the irradiaon intensity according to your skin condion.Be sure to use the rst level
for the rst use;
• If the skin becomes slightly hot and red aer use,this is normal;
• The product cannot be le unaended aer it is powered on,please shut down immediately
aer use;
• Clean the skin to ensure that there is no hair residue on the skin surface,it is completely dry
and free of oily substances and stains;
• If the ambient temperature derence exceeds 20 degrees (from low temperature to high
tempera-ture,or vice versa).please turn o the instrument and let it stand Reuse aer about 2
hours; . Do not use near ammale and explosive materials (including sprayers and gas
staons.etc.),which may cause re and electric shock,
• The ambient temperature for this hair removal is 0-45 C,please conrm the room temperature
before use;
• Within 24 hours aer irradiaon,please avoid direct ultraviolet rays; . Do not expose the
product to direct sunlight or ultraviolet light for a long me,which will seriously damage the
product;
• If the built-in fan does not work(no murmur is heard)aer turning on the power,do not use it
to avoid malfuncons such as smoke and re.

Unsuited community and situaon
• Not suitable for pregnant women,lactang women, women's menstrual periods,body
scars,diabe-tes,fragile skin and light-sensive skin;
• Severe heart disease,moderate to severe hypertension,malignant tumors,folliculis,infecous
skin disease, burned skin and ancoagulant disorders are prohibited;
• Do not use if you have abnormal collagen metabolism, including history of scars and poor
wound healing; . Paents with vascular diseases,such as varicose veins and vasodllaon in the
irradiaon site;
• Do not use if your skin is sensive to light and prone to rashes or allergies; . Please do not use
it if your irradiated area is infected,paent with herpes simplex,skin lesions and hematoma is
prohibited;
• Suppression of immune response diseases (including HIV infecon,lupus
erythematosus.porphyr-ia,etc.)is prohibited; . Any paent with bleeding disorder is
prohibited,and those who use isotrenoin, fruit acid (AHA),sali-cylic acid(BI1A)or azalea acid are
prohibited;
• Please use this product with cauon for those who use chemical hair removal within 30
days,those who have used skin whitening products in a short me,or those who hays used
vitamin A ingredients;
• Do not use with essenal oil products at the same me. Please ensure that the skin in the light
area is clean and dry,and no loons,lubricants and other cosmecs are used.
• If the skin surface is not clean and dry.it may aect the use experience of the product and may
even damage the product;
• Prohibited during taking aspirin drugs,using Immunosuppressive drugs,isotrenoin and other
drugs. The recent use of light-sensive drugs is prohibited (such as tetracycline andsulfa)
Do not use for the following body parts or the following condions
1/ Intra—oral, genitals, mucosa,etc.
2/ Plasc surgery
3/ Throat knot
4/ Eyeball, eyelid, around eyes
5/ Head
6/ Acne area
7/ Taoo, body painng
8/ Eyebrows, hair
9/ Ear
10/ Nipple, Areola
11/ Inside the navel

12/ Large vein
13/ Taoo, body painng
(Note: This list is not exhausve,if you are not sure whether you can use this product we
recommend that you consult a doctor)
Notes
1. Do not use the instrument with naturally dark skin
2. Don't expose yourself before hair removal
3. Before shaving,please shave rst(do not use chemical hair removal method)
4. Be sure to start in rst gear when using for the rst me
5. When preparing hair removal,make sure the hair removal window is close to the skin and then
perform the hair removal operaon.
6. Prohibited to use in dark environment
7. Wear protecve glasses when using
8. Do not use it in direct sunlight to avoid machine failure.
9. Do not violently impact or shake this product
10. Do not unplug directly without turning o the machine to avoid damage to the machine.
Noce: When using the hair removal device for a break, please make sure that the inlet is facing
up and the LCD is facing down,Which is benecial to thermal dissipaon and cooling.
Introducon to use
1 Use preparaon
1. Please remove the hair from the surface of the skin rst. Be sure to wet the hair, use the
method of wet scraping to do a good skin treatment in advance, so that the hair below the
surface of the skin can be absorbed into the light source to ensure the eect of the course of
treatment. If the hair does not exceed 2 mm, you can operate the instrument without shaving.
2. Clean the skin and make sure there is no hair on its surface, completely dry and free of any
oily substances. Before using the photon depilator, it is strictly forbidden to apply condenser,
aloe gel and other products, otherwise it will lead to no light (only large equipment in beauty
salons need to be applied, but not for household use).
2 Steps for usage
1. Take out the instrument, please clean the head lter of the machine with a so cloth.
2. Before using this instrument to depilate, please wet the hair and scrape it o with a razor.

3. Connect the power adapter and the machine display displays the word "OFF".
4. Press "Power on key" for a long me unl the display screen is turned on (the machine is
turned on when the content of the display screen changes).
5. When the content of the display changes from "ashing" to "always bright", it means that the
hair removal device is ready (the rst ash is bright, the eyes may not adapt, please wear goggles
to reduce the discomfort of the ash to the eyes).
6. The content of the display screen is "always on", and the instrument is in the state of "ash
ready"; if the content of the display screen has not changed, try to unplug the power adapter
and restart the machine.
7. Press the depilator vercally on the skin at an angle of 90 to ensure that the skin is in full con-
tact, and the "number" in the display screen will "ash". ( The use of hair removal instrument
for the rst me, there will be a "micro-current" feeling because of unconformable of skin, which
is the normal reacon of the human body, not caused by machine leakage. ) .
8. Aer the machine is glued to the skin, gently press the "ash buon" of the instrument, and
the instrument will send out a ash, accompanied by a clear "crackle sound", and you will feel
the warm feeling produced by the ash at the same me (if the temperature is too high, it means
that the gear you have chosen is too high, it is recommended to start from the rst gear).
9. Aer using the instrument to send out a ash, change the depilaon part, when the energy is
ready, the "gear indicaon" in the display screen will be "always on", and you can repeat the
above "step 7".
10. Use the rst gear to test the skin. If there is no adverse reacon aer 24 hours, you can adjust
the energy gear through the "power on key", and the energy gear can be divided into 5 gears.
11. Follow these steps, you can depilate the part of your choice. One hair removal course is
usually lighted three mes. First take o the whole body, and then do it for the second and third
me.
12. Please ash as close to the last ash as possible to fully deal with the desired part.
13. Aer using, please press "Power on key" for a long me to shut down (aer shutdown, the
product will enter the countdown to the shutdown), the screen will enter the word "OFF" and
cut o the power supply. Finally, the head and fuselage are cleaned.
Model introducon
• Connuous play mode (for large areas such as arms,legs), Place the light outlet on the area to
be treated on the skin and fully t the skin.At this me,the hair removal sensor lamp will light up
indicang that the lamp head is in full contact with the skin.Long press the ash buon, and
immediately start moving the instrument slowly and uniformly on theskin,keeping the t with
the skin,and the ash will be emied at a certain interval. At this me,please keep the hair
removal moving,and slide the hair back and forth twice in the area where hair removal is needed.
To ensure that the hair removal area is covered evenly and avoid missing light.

Tip:
The skin's movement speed can be adjusted according to the ash speed,so that the coverage is
more uniform,the ash frequency is faster in the rst gear,the ash frequency is slower in the
second gear,and the higher the gear,the slower the light output speed.
• Single play mode
Suitable for small areas such as ngers and Place the light outlet on the area to be treated on
the skin and fully t the skin. At this me,the hair removal sensor lamp will light up,indicang
that the lamp head is in full contact with the skin.Short press the ash buon to start hair
removal.Move the lamp head to the next piece of skin,wait for the white light of the hair removal
sensor lamp to light up,and then press the ash buon to repeat the above operaon in order.
Tip: At any me during the hair removal process,if your skin begins to feel overheated,just pause
for a few seconds,allow the light outlet to cool down again,and then pertorm hair removal.
Ecacy cycle reference table
1-4 weeks:
2-3 mes a week more than 75% hair start to fall o naturally
5-6 weeks:
Twice a week new hair loss and inhibit growth
7-8 weeks:
Once a week hair becomes thinner and less, No rebound
More than 8 weeks:
1-2 mes a week according to the hair growth state, selecve use (hair growth) You can make it
again at the beginning, use unl no longer long.
Care aer used
Precauons aer hair removal
• It is recommended to avoid contact with water within 6 hours aer the hair removal operaon,
and then moisturizing water can be used to moisturize the irradiated area.
• Do not use perfurnes,masks, or cosmecs containing frosted beads aer skin depilaon.Avoid
Uv exposure for 24 hours aer depilaon,and apply sunscreen if necessary.
• Sunbathing is likely to cause skin darkening or sunbum. Irradiaon at this me wil cause red
rednss swelling,and inammaon.Therefore,during the use of this product,be careful not to be
exposed to the sun, and the me to repair the sunburn is not less than 1 week.
• Aricial tanning is not allowed during the hair removal operaon.
• If you need plac surgery aer har removal (only for the hair removal area),consult your doctor.
• If you feel unwell,consult your surgeon.
Cleaning and maintenance

• In order to ensure the best results and the longest service life of the product, please clean the
product before and aer each epilaon to avoid long-term accumulaon of hair and dustlf you
do not clean it properly, the product will not get its proper eect.
• Before starng cleaning, the device must be switched o and unplugged to allow the machine
to cool.
• Use a so, clean and dry cloth to wipe and clean the mirror surface of the light outlet.
• Store the device in a dry,dust-free environment at-10-60° C.
• Never wash the product and accessories in faucets and dishwashers.
• Do not use steel balls,abrasive cleaners (toothpaste,etc.) or corrosive liquids (gasoline, motor
oil, acetone,etc.) to clean the product. Note:If the water does not clean well, you can use a few
drops of high concentraon alcohol(not more than 96%) to clean the above parts.
Environmental protecon When disposing of the product, please do not throwit with general
household waste.You should send it to a designated recycling center.This is good for the
environment
Troubleshoong
This chapter outlines the most common problems encountered in using this instru-ment. If you
cannot resolve the problem by using the following informaon, please contact the customer
service center in your country.
* The device/power adapter becomes warm during use
This is a normal phenomenon
There is no need to take any acon.
* I put the depilator on the skin and the number ashed], but the cooling fan started running.
Overheat protecon has been acvated.
When the overheat protecon starts, the fan sll runs connuously. Do not turn o the power
of the device, please wait for it to cool for more than 15 minutes before connuing to use.
*[Flash ready] ashes, but the device does not ash when the ash buon is pressed.
The device needs to be reset. Reset the device, turn the power o and back on. It smells had
when using the device.
You have not completely removed the hair from the treatment site. These hairs may burn and
produce a bad
Please remove the hair on the surface of the skin before using this instrument

*During the course of treatment, the skin feels more sensive than usual / unbearable pain
when using the device.
The light intensity seng you are using is too high
Please check to make sure that the appropriate light intensity seng is selected. Please lower
the seng if necessary.
IX Disclaimer
It cannot be treated as a warranty:
1.Failure to operate in accordance with the requirements of the Manual, mainte-nance and
maintenance resulng in product damage
2. Product damage caused by during use misoperaon (washing, immersion, etc.
3. Product damage caused by exceeding the allowable use environment (such as high
temperature, corrosion, etc.).
4. Product damage caused by abnormal external forces (fall, extrusion, impact, etc.).
5. Product damage caused by natural force majeure (re, ood, lightning strike, etc.).
6.Damage caused by the use of non-factory parts and extensions. If there are any changes listed
above, the relevant regulaons newly formulated by our company or the relevant laws and
regulaons updated by the state shall prevail.