Tekno RC EB48 2.0 Instruction Manual

Introduction
Disclaimer: Tekno RC is not responsible or liable for any property or personal damage, loss, or injury incurred as a
result of using this product. This kit is meant for use by persons 14 years of age or older and in the strict connes of
a legally permitted RC track or facility.
Warnings: Always double-check that your radio gear is working properly before operating vehicle. Never operate the
vehicle indoors (unless the RC track is an indoor facility). Use caution while operating vehicle so as not to collide with
people who may be turn marshalling or who might otherwise not be aware that a fast moving RC vehicle is in the vicinity.
Warranty: We warrant that the parts included in this kit are free from defects. If you nd a defective part in your kit,
please contact us at [email protected] and we will help to resolve the issue. If you modify any part prior to contacting
us, the warranty claim will be void. We do not warranty parts that may be broken during operation of the vehicle
or otherwise. Refer to the end of this instruction manual for a listing of spare/replacement and option parts.
All spare parts and other info are available on our website (www.teknorc.com) and through our network of
domestic and international dealers and distributors.
Thank you for purchasing the Tekno RC EB48 2.0 1/8th 4WD competition electric buggy kit.
We are always working on new projects, so please check our website regularly at www.teknorc.com
or visit us on Facebook at www.facebook.com/teknorc for all the latest news, parts, and kits.
Take your time! When you work your way through these building instructions, keep an eye out
for the following important indicators below:
•
RED TEXT - This indicates important areas of the build process that should be observed.
•
YOUTUBE - We also have many useful build videos on Youtube, so be sure to check these out!
https://www.youtube.com/c/teknorc
Thread Lock icons
Thread lock is always used when a screw is inserted into any metal part. (Included with kit)
Thread
Lock
Grease icons
Grease is usually used on areas with movement and for sealing. (Included with kit)
Grease
Additional equipment and parts needed:
•
Paint for body
•
1/8th scale ESC and motor system
•
High torque steering servo (at least 300 oz/in)
•
4s (4 cell, 14.8v) LiPo battery (at least 5000mAh)
•
1/8th scale tires, wheels & CA glue (or premounts)
•
MOD1 Pinion 15 tooth - 25 tooth (TKR4175 - TKR4185)
Tools needed:
•
Hex drivers 1.5mm, 2.0mm, 2.5mm
•
Nut drivers 5.0mm (TKR1107, 5.5mm (TKR1108), 7.0mm (TKR1109)
•
Hobby knife
•
Needle-nose pliers
•
Shock tool (TKR1115) OR adjustable (Crescent) wrench (for shock assembly)
•
17mm Wheel Wrench (TKR1116)
•
4mm turnbuckle wrench (TKR1103) - 5.5/7.0 two sided wrench (TKR1119)

TKR5145B
TKR5144
Bag A
Center Dierential
(overview)
TKR1325
X 4pcs
TKR9149
TKR9150
TKR5145B
TKR9114
TKR5144
TKR5145B
TKR9143
Step
A-2
Step
A-4
Fill Level
Step
A-3
Step
A-1
TKR5144
Dierential 0-rings
x2
TKR5145B
Dierential Shims (6x17mm)
x2
TKR1325
M3x14mm Flat Head Screw
x4
TKRBB08165
TKR9115
TKR9150
TKR9149
Di
Oil
TKR9237
TKR9237
TKR9143
TKRBB08165
TKRBB08165
TKR9114
TKR9114
TKR9150
TKR5145B
TKR9150
TKR1325 x4
TKR9114
TKR5144
TKR9115
TKR9114
3
Grease
Grease
Grease
Grease
Fill with #10,000 CST oil to
1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: Apply grease to the
recess inside TKR9115,
where the o-ring is placed
as well as the o-ring itself.
TKR9114
TKRBB08165
TKRBB08165
Ball Bearing (8x16x5)
x2
*TKR5114XB
(option)
*TKR5114XB
(option)
*TKR9117
(option)
*TKR9117
(option)
*TKR5114XB
(option)

TKR5145B
TKR5144
Bag B
Front and Rear Dierential
(overview)
TKR1325
X 4pcs
TKR9149
TKR9150 TKR5145B
TKR9115
TKR5144
TKR5145B
TKR9143
Step
B-2
Step
B-4
Fill Level
Step
B-3
Step
B-1
TKR5144
Dierential 0-rings
x4
TKR5145B
Dierential Shims (6x17mm)
x4
TKR1325
M3x14mm Flat Head Screw
x8
TKRBB08165
TKR9115
TKR9150
TKR9149
Di
Oil
TKR9151
TKR9114
TKR9143
TKR9150
TKRBB08165
TKR9114
*TKR5114XB
(option)
*TKR5114XB
(option)
*TKR5114XB
(option)
TKR5145B
TKR9150
TKR5144
TKR5144
TKR9151
TKR1325 x4
4
Grease
Grease
Grease
Grease
Fill with #10,000 CST oil FRONT
Fill with #7,000 CST oil REAR
to 1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: Apply grease to the
recess inside TKR9115,
where the o-ring is placed
as well as the o-ring itself.
TKR9114
TKRBB08165
TKR9114
TKRBB08165
Ball Bearing (8x16x5)
x4
Repeat for rear diRepeat for rear di
Repeat for rear di
Repeat for rear di

Note: Do not Over-tighten.
Note: Apply a small
amount of black grease
to the ring gear teeth.
Note: TKR1222 may
not be required. Check
fitment and add if needed.
TKR1603
TKR1301
TKR1301
TKR1301
TKR9153
TKR9012
TKR8727
TKR9268
*TKR9268C
(option)
*TKR9268C
(option)
TKR9012
TKR1525
TKR1525
TKR9268
TKR8727
TKR5075
TKR5075
TKR1226
TKR9012
TKR1222
TKR1222
TKR9017
TKR1212
TKR1212
TKR1525
x4pcs
TKR1525
x4pcs
TKR9017
TKR1301
TKR9153
TKR1603
TKR9012
TKRBB05114
TKRBB05145
TKR1226
TKRBB05114
TKRBB05145
Step
C-1
Step
C-3
Step
C-4
Step
C-2
TKR1222
13x16x.1mm Shim
x2
TKR1301
M2.5x6mm Flat Head Screw
x2
TKR1525
M3x14mm Cap Head Screw
x6
TKR1603
M5x4mm Set Screw
x1
TKR1226
M5x7x.2mm Shim
x1
TKRBB05114
Ball Bearing (5x11x4)
x1
TKRBB05145
Ball Bearing (5x14x5)
x1
Grease
TKR1212
M4 Lock Nut Flange
x2
Bag C Front Gearbox (overview)
5
Thread
Lock

Note: Do not Over-tighten.
TKR1603
TKR1301
TKR1529
TKR1301
TKR1201
TKR9269S
TKR9153
TKR1525
TKR9016
TKR1529
TKR1525
TKR1222
TKR1529
TKR1525
TKR1525
TKR8727X
TKR9181
TKR9095
TKR9016
TKR9017
TKR9017
TKR1525
TKR1212
TKR1212
TKR8727X
TKR1529
TKR9181
TKR1301
TKR1301
TKR9016
TKR1222
TKR9153
TKR9181
TKR1603
Thread
Lock
TKR9016
TKRBB05145
TKR1226
TKRBB05114
TKR9095
TKR1226
TKR9181
TKR9269S
*TKR9269SC
(option)
*TKR9269SC
(option)
*TKR9181T
(option)
*TKR9181T
(option)
TKR1525
TKRBB05114
TKRBB05145
Step
D-1
Step
D-3
Step
D-4
Step
D-2
TKR1222
13x16x.1mm Shim
x2
TKR1301
M2.5x6mm Flat Head Screw
x2
TKR1525
M3x14mm Cap Head Screw
x6
TKR1529
M3x20mm Cap Head Screw
x3
TKR1603
M5x4mm Set Screw
x1
TKRBB05114
Ball Bearing (5x11x4)
x1
TKRBB05145
Ball Bearing (5x14x5)
x1
TKR1226
M5x7x.2mm Shim
x1
TKR1201
M3 Locknut Black
x2
TKR1212
M4 Lock Nut Flange
x2
Note: TKR1222 may
not be required. Check
fitment and add if needed.
Note: Apply
a small amount of
black grease to
the ring gear teeth.
Grease
Bag D Rear Gearbox (overview)
6

Note: With double dot down out
inserts, Rear Toe = 3.0°
Note: The D block
is wider than
the A block.
Note: With double dot down
inserts, Anti-Squat = 1.5°
TKR1601
TKR9055
TKR1445
TKR9017
TKR1601
TKR1443
TKR9164
TKR5165
Bag E
Rear End
Assembly
Optional Sway Bars
(sold separately)
*TKR9190 - 2.2mm
*TKR9192 - 2.3mm
*TKR9193 - 2.4mm
*TKR9195 - 2.6mm
*TKR9196 - 2.7mm
*TKR9197 - 2.8mm
*TKR9198 - 2.9mm
*TKR9199 - 3.0mm
TKR1601
TKR5165
TKR5049A
TKR9059
TKR1529
TKR9055
TKR9163
TKR1238
TKR9184XT
*TKR9184
(option)
TKR5165
TKR9020
TKR5079A
TKR9017
TKRBB050825
TKRBB050825
TKR9194 - 2.5mm
Step
E-1
Step
E-2 Step
E-3
Step
E-4
TKR1238
M4x10mm Droop Screw
x2
TKR1443
M4x10mm Button Head Screw
x1
TKR1445
M4x14mm Button Head Screw
x2
TKR1529
M3x20mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
TKRBB050825
Ball Bearing (5x8x2.5)
x2
7
Stock Position
(”D” Block)
Stock Position
(”C” Block)
Thread
Lock

TKR9034
TKR1201
TKR1601
TKR5071
TKR9165
TKR5165
TKRBB08165F
TKR1603 TKR5071
TKR1201
TKR9165
TKR8073
TKR9166
TKR9040
TKR9166 TKR9040
TKR8072
TKR8070
TKRBB15214
TKR8073
x4
TKR1601
M3x4mm Set Screw
TKRBB08165F
Flanged Ball Bearing (8x16x5)
x2
TKR1201
M3 Locknut Black
x4
TKRBB15214
Ball Bearing (15x21x4)
x2
Step
F-1
Step
F-2
Grease
Thread
Lock
TKR1603
M5x4mm Set Screw
x2
Note: Do not overtighten .
Bag F
Rear Hub/Camber Link
8
LOW
HIGH
ROLL CENTER
HUB INSERTS
1 (L+)
2 (L)
3 (M)
4 (H)
5 (H+)
Static Toe
Active Toe
(Right Arm)
0° 0° 0°1° in 1° in
1° in 1° in1° out 1° out
1° in
0°0°
ARM INSERTS
*TKR5071B (+1mm)
*TKR5071C (+2mm)
*TKR5071X (light)
(Option)
*TKR9087
(Option)
Note: Make two of these assemblies.
Note: Repeat on other side.

TKR1201
TKR1211
TKR1529
TKR1534
Step
F-3
1
2
3
4
5
6
7
8
9
10
Stock position is 9/B
29.50mm
Note: Notch always
goes on left side of vehicle.
Actual Size
Step
F-4
Build Note: Hold the turnbuckle stationary
with pliers and push the rod end hard onto the
turnbuckle while turning at the same time.
Keep in mind that one end of the turnbuckle has
normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-o” when
adjustments are being made.
Right
Left
TKR8052A
TKR5187B
TKR8052A
TKR5187B
TKR5187B
TKR9050
TKR9050TKR5187B
TKR8052A
TKR8052A
Bag F
Rear Camber Links
Note: These oset rod ends may be required
if running excessive droop. Install on hub
side for clearance inside the wheel. These
are located inside bag S.
9
TKR1201
M3 Locknut Black
x2
TKR1211
M3 Lock Nut Flange Black
x2
TKR1529
M3x20mm Cap Head Screw
x2
TKR1534
M3x22mm Cap Head Screw
x2

Note: With center dot
inserts, Arm Sweep = 0°
Note: With single dot down
inserts, Kick Up = 11°
TKR1601
TKR1238
TKR9055
TKR1445
TKR9017
TKR1601
TKR1445
TKR5165
TKR9018
Bag G
Front End
Assembly
TKR1601
TKR5165
TKR5049A
TKR1529
TKR9055
TKR9162
TKR9286XT
*TKR9286
(option)
TKR5165
TKR9020
TKR9161
TKR9059
TKR5079A
TKR9017
TKRBB050825
TKRBB050825
TKR9083 - 2.3mm
Step
G-1
Step
G-2 Step
G-3
Step
G-4
TKR1238
M4x10mm Droop Screw
x2
TKR1445
M4x14mm Button Head Screw
x3
TKR1529
M3x20mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
TKRBB050825
Ball Bearing (5x8x2.5)
x2
Optional Sway Bars
(sold separately)
*TKR9080 - 2.0mm
*TKR9081 - 2.1mm
*TKR9082 - 2.2mm
*TKR9084 - 2.4mm
*
TKR9085 - 2.5mm
*TKR9086 - 2.6mm
*TKR9088 - 2.7mm
*TKR9089 - 2.8mm
Note: The A block
is narrower than
the D block.
10
Stock Position
(”A” Block)
Stock Position
(”B” Block)
Thread
Lock

Bag H
Front CVA / Spindle &
Carrier Assembly
Step
H-1
Step
H-2
Step
H-3
Step
H-4
TKR8073
TKR8073
TKR8070
TKR9041
TKRBB15214
TKRBB08165F
TKR5071
TKR9043
TKR1603
TKR1601
TKR9042B
*TKR9042
(option)
TKR8042
TKR8042
TKR9043
TKR1601
TKRBB05104
TKRBB05104
TKR8072
TKR9041
TKR1601
Grease
x8
TKR1601
M3x4mm Set Screw
TKR1401
M3x6mm Button Head Screw
x2
DO NOT SKIP
THIS STEP!
Note: These are steering
stop screws. They provide
a mechanical limit to the
steering throw and make
the car easier to drive
by greatly improving the
consistency of the steering.
TKR1221
TKR1401
Thread
Lock
TKR1221
M3x8mm Washer
x2
*TKR5071B (+1mm)
*TKR5071C (+2mm)
*TKR5071X (light)
(Option)
TKR1603
M5x4mm Set Screw
x2
TKRBB08165F
Flanged Ball Bearing (8x16x5)
x2
TKRBB15214
Ball Bearing (15x21x4)
x2
TKRBB05104
Ball Bearing (5x10x4)
x4
Note: Do not
overtighten .
Note: Make left and right side assemblies.
Note: Make left and right side assemblies.
11
*TKR9087
(Option)
Thread
Lock

TKR8052A
Right
Left
Front Camber Links
TKR5187B
TKR8052A
TKR5187B
TKR5187B
TKR9049
TKR9049
TKR5187B
TKR8052A
TKR1529
TKR1529
TKR8052A
Bag H
Front Camber Links
Step
H-5
Step
H-6
Build Note: Hold the turnbuckle stationary
with pliers and push the rod end hard onto the
turnbuckle while turning at the same time.
Keep in mind that one end of the turnbuckle has
normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-o” when
adjustments are being made.
17.00mm
Note: Notch always
goes on left side of vehicle.
Actual Size
TKR1211
TKR1211
TKR1529
M3x20mm Cap Head Screw
x4
TKR1211
M3 Lock Nut Flange Black
x4
12
Stock position is 2/B

Steering Links
Stock Position
(is forward hole)
(front of vehicle)
25.50mm
Note: Notch always
goes on left side of vehicle.
Actual Size
Right
Left
TKR8052A
TKR9059
TKR8052A
TKR9059
TKR9123
TKR9059 TKR9123
TKR9059
TKR8052A
TKR8052A
Thread
Lock
Thread
Lock
Step
I-1
Step
I-2
Step
I-3
Step
I-4
TKR5103 TKR1403
TKRBB050825
TKRBB06103
TKR1529
TKR1403
M3x10mm Button Head Screw
x2
TKR5101X
* OR TKR5231
TKR9104
TKRBB06103
TKR5231
TKR8100B
TKRBB050825
TKRBB050825
TKR9104
TKR1403
TKR5122
TKR5231
TKR1201
TKR1221
X 4pcs
Note: Tighten nut all the
way down, then back it o
2 full turns.
Note: Fit this
o-ring inside
the groove
of the nut
above it.
Note: Can use
17mm wheel
wrench here.
TKR1201
M3 Lock Nut Black
x2
TKRBB06103
Ball Bearing (6x10x3)
x4
TKRBB050825
Ball Bearing (5x8x2.5)
x4
TKR1529
M3x20mm Cap Head Screw
x2
TKR1221
M3x8mm Washer
x8
Note: This piece is included
in the kit, and can be used
in the place of the servo
saver assembly, however
it can damage your servo.
Run at your own risk.
Bag I
Steering
Assembly
13

Thread
Lock
Step
J-1
Step
J-2
Step
J-3
TKR9181
TKR1221
X 4pcs
TKR1322
TKR1250
TKR1250
TKR1221
X 4pcs
TKR1443
TKR1443
TKR9102A
TKR9104
TKR1201
TKR1201
TKR1443
TKR1201
M3 Lock Nut Black
x2
TKR1322
M3x8mm Flat Head Screw
x1
TKR1443
M4x10mm Button Head Screw
x4
TKR1221
M3x8mm Washer
x8
TKR1250
M3 Steering Link Screw
x2
Bag J
Front End Assembly
14

TKR1344 TKR1344
TKR9262
TKR9010
TKR9062
TKR9191
TKR9062
TKR9002
TKR1343
TKR9262
TKR1524
TKR1349
TKR1444
TKR1324
TKR1343
TKR1346
TKR1343
TKR1344
TKR1447
TKR1524
Step
K-3
Step
K-2
Step
K-1
TKR1324
M3x12mm Flat Head Screw
x2
Thread
Lock
TKR1524
M3x12mm Cap Head Screw
x3
TKR1343
M4x10mm Flat Head Screw
x7
TKR1344
M4x12mm Flat Head Screw
x4
TKR1346
M4x15mm Flat Head Screw
x2
TKR1349
M4x20mm Flat Head Screw
x2
TKR1444
M4x12mm Button Head Screw
x1
TKR1447
M4x16mm Button Head Screw
x1
Note: Since the bumper is keyed into the chassis,
you must back it o before installing front clip.
Bag K
Front/Center Assembly
15

TKR1528
TKR9062
TKR9062
TKR1344
Step
K-5
Step
K-4
TKR1324
M3x12mm Flat Head Screw
x2
TKR1344
M4x12mm Flat Head Screw
x1
TKR1346
M4x15mm Flat Head Screw
x2
TKR1349
M4x20mm Flat Head Screw
x2
TKR1444
M4x12mm Button Head Screw
x2
TKR1528
M3x18mm Cap Head Screw
x1
TKR1346 TKR1324
TKR1349
TKR1444
Bag K
Rear Assembly
16

TKR1240
Note: Slot in spring
perch should face
outside of vehicle.
Note: Black screw
is RH threaded
and goes on
left side.
Silver screw is
LH and goes
on right side.
TKR1211
Thread
Lock
Stock shock position is inside
hole on the arm,
and middle hole on the tower
Stock front ride height is 24mm
Shock length (droop) is 115mm
M2.5 Lock Nut Zinc
TKR1200
x2
TKR1240
M3x18mm Shock Mnt Screw
x2
TKR1248
M2x4mm Emulsion Screw
x2
TKR1211
M3 Lock Nut Flange Black
x2
TKR1605
M3x10mm Set Screw
x2
TKR1200
TKR6169
TKR6017
TKR6140C
TKR5049A
*TKR6017T
(Option)
*TKR6160
*TKR6163
*TKR6168
(Option)
Note: Use green
slime or oil on
shock shaft
threads AND
O-rings to
prevent tearing
and leaking.
TKR6144
Note: Shock boots
must be installed
BEFORE attaching
rod end.
TKR1605
TKR6040
*TKR6035
*TKR6036
*TKR6037
*TKR6038
*TKR6039
*TKR6045
*TKR8762
*TKR8763
*TKR8764
*TKR8765
*TKR8766
*TKR8767
*TKR8768
*TKR8769
*TKR8770
(Option)
Bag L
Front Shock Assembly
TKR8702
TKR8730
*TKR6003
*TKR6003B
(Option)
Use #650 CST oil
FRONT
650
TKR6013
Refer to filling
instructions on
page 19 during
this step.
TKR6016
TKR6009
TKR6009
TKR6009
TKR6146B
TKR6146B
TKR6146B
TKR6015
Step
L-1
Step
L-2
Step
L-3
Step
L-4
Step
L-5
TKR6140C
17
Note: Bottom
guide is shorter
in the front
shocks.

TKR1240
Note: Slot in spring
perch should face
outside of vehicle.
Note: Black screw
is RH threaded
and goes on
right side.
Silver screw is
LH threaded and goes
on left side.
TKR1211
Thread
Lock
Stock shock position is inside
hole on the arm, and 2nd hole
from the inside on the tower
Stock rear ride height is 26mm
Shock length (droop) is 121mm
M2.5 Lock Nut Zinc
TKR1200
x2
TKR1240
M3x18mm Shock Mnt Screw
x2
TKR1248
M2x4mm Emulsion Screw
x2
TKR1211
M3 Lock Nut Flange Black
x2
TKR1605
M3x10mm Set Screw
x2
TKR1200
TKR6169
TKR6017
TKR6140C
TKR5049A
*TKR6017T
(Option)
*TKR6160
*TKR6163
*TKR6168
(Option)
Note: Use green
slime or oil on
shock shaft
threads AND
O-rings to
prevent tearing
and leaking.
TKR6144
TKR1605
TKR6038
Bag M
Rear Shock Assembly
TKR8702
*TKR6003
*TKR6003B
(Option)
Use #600 CST oil
REAR
600
TKR6013
Refer to filling
instructions on
page 19 during
this step.
Note: Shock boots
must be installed
BEFORE attaching
rod end.
Note:
Bottom
guide is longer
in the rear
shocks.
TKR6016
TKR6009
TKR6009
TKR6009
TKR6146
TKR6146
TKR6146
TKR6015
Step
M-1
Step
M-2
Step
M-3
Step
M-4
Step
M-5
TKR6140C
18
*TKR6035
*TKR6036
*TKR6037
*TKR6039
*TKR6040
*TKR6045
*TKR8762
*TKR8763
*TKR8764
*TKR8765
*TKR8766
*TKR8767
*TKR8768
*TKR8769
*TKR8770
(Option)
TKR8730

TKR1248 TKR1248
Pull shaft down,
remove screw
THEN
Push shaft up to bleed air,
insert screw snug
(do not overtighten)
Step 1. Insert the four larger o-rings into the emulsion caps and set aside. Install the small o-rings onto
the small emulsion screws by placing the o-rings on a pit mat or towel and pressing the screws into the
o-rings (add 1 small drop of oil onto the seal to help make the screw slide in easier).
Step 2. Fill shock with oil all the way to the top and pump the shock shaft up and down 3-5 times.
Step 3. Screw on the cap all the way tight (shock tool TKR1115 is helpful for holding the shock body).
Be careful to not cross-thread the caps. Start by turning in the oposite direction before tightening.
Step 4. With the shock at about a 45° angle, push and hold the shock shaft to the top of the stroke and
insert the prepared emulsion screw/seal. Oil should leak out during this process. If it does not, add more oil.
Tighten the screw until snug (do not over-tighten). Wipe o excess oil before moving on to step 5.
Step 5. Pump the shock shaft up and down about 20 times vigorously. This emulsifies the oil.
Step 6. With the shock shaft fully extended, remove the emulsion screw from the cap to do the final bleed.
Step 7. With the shock at about a 45° angle, push and hold the shock shaft to the top and insert the
prepared emulsion screw/seal again. Oil will leak out during this process. Finish by tightening the screw
until snug (do not over-tighten).
We've found it's easiest to complete steps 1 & 2 on each shock before moving on to step 3.
By the time you've finished step 2 on the last shock, the first one will be ready for step 3.
Step
1
Step
2-3
Step
4
Step
5
Step
6-7
Prepare caps by
inserting seals
AND
Push small
screws into small
o-rings
(use a drop of
oil to help
prevent a tear)
TKR6714
TKR1248
TKR6714
Fill with oil,
Pump up and down
3-5 times,
Then screw on cap
Fill with oil,
Pump up and down
3-5 times,
Then screw on cap
Pump up
and down
30 times
Pump up
and down
20 times
Push shaft up
to bleed air out
THEN
Insert screw snug
(do not overtighten)
Shock Filling Instructions
For both front and rear shocks
19

Step
N-1
Step
N-2
Step
N-3
TKR1525
TKR1221
TKR1221
TKR9065
TKR9065
TKR5126
TKR1601
TKR1525
TKR1525
TKR9065
TKR1221
TKR1221
TKR1325 x 4pcs
TKR1325
TKR1402
TKR1402
TKR1401
TKR1221
M3x8mm Washer
x4
Note: Receiver
(not included)
Note: ESC
(not included)
Note: Transponder
(not included)
Note: Servo
(not included)
Note: We recommend
using a servo with at least
300 oz/in torque.
TKR1401
M3x6mm Button Head Screw
x2
TKR1525
M3x14mm Cap Head Screw
x4
Thread
Lock
TKR1601
M3x4mm Set Screw
x1
TKR1325
M3x14mm Flat Head Screw
x6
TKR1402
M3x8mm Button Head Screw
x6
Bag N
ESC/Radio Tray install
20