Tekno RC SCT 410 2.0 Instruction Manual

Introduction
Disclaimer: Tekno RC is not responsible or liable for any property or personal damage, loss, or injury incurred as a
result of using this product. This kit is meant for use by persons 14 years of age or older and in the strict connes of
a legally permitted RC track or facility.
Warnings: Always double-check that your radio gear is working properly before operating vehicle. Never operate the
vehicle indoors (unless the RC track is an indoor facility). Use caution while operating vehicle so as not to collide with
people who may be turn marshalling or who might otherwise not be aware that a fast moving RC vehicle is in the vicinity.
Warranty: We warrant that the parts included in this kit are free from defects. If you nd a defective part in your kit,
please contact us at [email protected] and we will help to resolve the issue. If you modify any part prior to contacting
us, the warranty claim will be void. We do not warranty parts that may be broken during operation of the vehicle
or otherwise. Refer to the end of this instruction manual for a listing of spare/replacement and option parts.
All spare parts and other info are available on our website (www.teknorc.com) and through our network of
domestic and international dealers and distributors.
Thank you for purchasing the Tekno RC SCT410 2.0 1/10th 4WD competition electric SC kit.
We are always working on new projects, so please check our website regularly at www.teknorc.com
or visit us on Facebook at www.facebook.com/teknorc for all the latest news, parts, and kits.
Take your time! When you work your way through these building instructions, keep an eye out
for the following important indicators below:
•
RED TEXT - This indicates important areas of the build process that should be observed.
•
YOUTUBE - We also have many useful build videos on Youtube, so be sure to check these out!
https://www.youtube.com/c/teknorc
Thread Lock icons
Thread lock is always used when a screw is inserted into any metal part. (Included with kit)
Thread
Lock
Grease icons
Grease is usually used on areas with movement and for sealing. (Included with kit)
Grease
Additional equipment and parts needed:
•
2+ channel radio transmitter and receiver
•
Body
•
Paint for body
•
1/10th scale ESC and motor system
•
High torque steering servo (at least 250 oz/in)
•
2s (2 cell, 7.4v) LiPo battery (at least 5000mAh)
•
1/10th scale SCT tires, wheels & CA glue (or premounts)
•
MOD1 Pinion 16 tooth - 20 tooth (TKR4176 - TKR4180)
Tools needed:
•
Hex drivers 1.5mm, 2.0mm, 2.5mm
•
Nut drivers 5.0mm (TKR1107, 5.5mm (TKR1108), 7.0mm (TKR1109), 8.0mm (TKR1110)
•
Hobby knife
•
Needle-nose pliers
•
Shock tool (TKR1115) OR adjustable (Crescent) wrench (for shock assembly)
•
4mm turnbuckle wrench (TKR1103) - 5.5/7.0 two sided wrench (TKR1119)

TKR5145B
Bag A
Center Dierential
(overview)
TKR1325
X 4pcs
TKR5149X
TKR5150B
TKR5113B
TKR5143
Step
A-2
Step
A-4
Fill Level
Step
A-3
Step
A-1
TKR5144B
Dierential 0-rings
x2
TKR5145B
Dierential Shims (6x17mm)
x2
TKR1325
M3x14mm Flat Head Screw
x4
TKRBB08165
TKR5150B
TKR5149X
Di
Oil
TKR9532
TKR9532
TKRBB08165
TKRBB08165
TKR5150B
TKR5144B
TKR5150B
TKR5143
TKR5145B
TKR1325 x4
TKR9114HD
TKR9114HD
TKR9114HD
3
Grease
Grease
Grease
Grease
Fill with #15,000 CST oil to
1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: Apply grease to the
recess inside TKR5113B,
where the o-ring is placed
as well as the o-ring itself.
TKR9114HD
TKRBB08165
TKRBB08165
Ball Bearing (8x16x5)
x2
*TKR9114
*TKR5114XB
(option)
*TKR9114
*TKR5114XB
(option)
*TKR9114
*TKR5114XB
(option)
*TKR5145C
(option)
*TKR5145C
(option)
*TKR5113
*TKR5113S
(option)
*TKR5113
*TKR5113S
(option)
*TKR5149
*TKR5149A
(option)
*TKR5149
*TKR5149A
(option)
TKR5144B
TKR5113B
*TKR5150
(option)
*TKR5150
(option)
*TKR5150
(option) *TKR5150
(option)
TKR5144B
TKR5145B
*TKR5145C
(option)

TKR5145B
TKR5144B
Bag B
Front and Rear Dierential
(overview)
TKR1325
X 4pcs
TKR5149X
TKR5150B
TKR5145B
TKR5113B
TKR5144B
TKR5145B
TKR5143
Step
B-2
Step
B-4
Fill Level
Step
B-3
Step
B-1
TKR5144B
Dierential 0-rings
x4
TKR5145B
Dierential Shims (6x17mm)
x4
TKR1325
M3x14mm Flat Head Screw
x8
TKRBB08165
TKR5113B
TKR5150B
Di
Oil
TKR5154M
TKR9114HD
TKR5143
TKR5150B
TKR9114HD
*TKR5145C
(option)
*TKR5145C
(option)
*TKR5151
(option)
*TKR5151
(option)
*TKR5145C
(option)
*TKR5145C
(option)
*TKR5113
*TKR5113S
(option)
*TKR5113
*TKR5113S
(option)
TKR5145B
TKR5144B
TKR5144B
TKR5154M
TKR1325 x4
4
Grease
Grease
Grease
Grease
Fill with #15,000 CST oil FRONT
Fill with #10,000 CST oil REAR
to 1mm below full
DO NOT OVER FILL
Note: Apply grease to the
groove in the outdrive.
Note: Apply grease to the
recess inside TKR9115B,
where the o-ring is placed
as well as the o-ring itself.
TKR9114HD
TKRBB08165
TKR9114HD
TKRBB08165
Ball Bearing (8x16x5)
x4
Repeat for rear diRepeat for rear di
Repeat for rear di
Repeat for rear di
*TKR5149
*TKR5149A
(option)
*TKR5144
(option)
*TKR5150
(option)
*TKR5150
(option)
*TKR5150
(option)
TKR5149X
TKR5150B
*TKR5149
*TKR5149A
(option)
*TKR5150
(option)
*TKR9114
*TKR5114XB
(option)
*TKR9114
*TKR5114XB
(option)
*TKR9114
*TKR5114XB
(option)
TKRBB08165

Note: Do not
over-tighten.
Note: Apply a small
amount of black grease
to the ring gear teeth.
Note: Use 15K di here.
TKR1603
TKR1301
TKR1301
TKR1301
TKR5153M
TKR1222
TKR9217
TKR8727
TKR9568
TKR9217
TKR1525
TKR1525
TKR9568
*TKR9568C
(option)
*TKR5152
(option)
*TKR5152
(option)
*TKR9568C
(option)
TKR8727
TKR5075HD
TKR5075HD
TKR1226
TKR9217
TKR9017
TKR1212
TKR1212
TKR1525 x2pcs
TKR1525
TKR1525
TKR9017
TKR1301
TKR5153M
TKR1603
TKR9217
TKRBB05114
TKRBB05145
TKR1226
TKRBB05114
TKRBB05145
Step
C-1
Step
C-3
Step
C-4
Step
C-2
TKR1301
M2.5x6mm Flat Head Screw
x2
TKR1525
M3x14mm Cap Head Screw
x4
TKR1603
M5x4mm Set Screw
x1
TKR1226
M5x7x.2mm Shim
x1
TKR1222
13x16x.1mm Shim
x2
TKRBB05114
Ball Bearing (5x11x4)
x1
TKRBB05145
Ball Bearing (5x14x5)
x1
Grease
TKR1212
M4 Lock Nut Flange
x2
Bag C Front Gearbox (overview)
5
Thread
Lock
Note: TKR1222 may not be required.
Check fitment and add if needed.
TKR1222
Note: This is the stando location.

Note: Do not over-tighten.
TKR1603
TKR1301
TKR1301
TKR9569
TKR5153M
TKR1525
TKR1525
TKR9218
TKR1525
TKR8727
TKR9095
TKR9218
TKR9017B
TKR9017B
TKR1212
TKR1212
TKR8727
TKR1301
TKR1301
TKR9218
TKR5153M
TKR1603
Thread
Lock
TKR9218
TKRBB05145
TKR1226
TKRBB05145
TKR9095
TKR1226
TKR9569
TKR1525 x 2pcs
TKR1525 x 2pcs
TKRBB05145
TKRBB05145
Step
D-1
Step
D-3
Step
D-4
Step
D-2
TKR1301
M2.5x6mm Flat Head Screw
x2
TKR1525
M3x14mm Cap Head Screw
x4
TKR1603
M5x4mm Set Screw
x1
TKRBB05145
Ball Bearing (5x14x5)
x2
TKR1226
M5x7x.2mm Shim
x1
TKR1212
M4 Lock Nut Flange
x2
Grease
Note: Apply a small
amount of black grease
to the ring gear teeth.
Note: TKR1222 may not be required.
Check fitment and add if needed.
TKR1222
TKR1222
13x16x.1mm Shim
x2
Bag D Rear Gearbox (overview)
6
TKR1222
*TKR9569C
(option)
*TKR5152
(option)
*TKR5152
(option)
*TKR9569C
(option)
Note: Use 10K di here.
Note: This is the stando location.

TKR1601
TKR1445
TKR9017B
TKR1601
TKR1443
TKR9561
Bag E
Rear End
Assembly
Optional Sway Bars
(sold separately)
*TKR9593 - 2.2mm
*TKR9593 - 2.3mm
*TKR9593 - 2.4mm
*TKR9593 - 2.5mm
*TKR9594 - 2.6mm
*TKR9594 - 2.7mm
*TKR9594 - 2.8mm
*TKR9594 - 2.9mm
*TKR9594 - 3.0mm
TKR1601
TKR5049A
TKR5056
TKR1528
TKR9561
TKR1238
TKR9515
TKR9020
TKR5079A
TKR9017B
TKR9218
TKR9218
TKR9593 - 2.1mm
Step
E-1
Step
E-2 Step
E-3
Step
E-4
TKR1238
M4x10mm Droop Screw
x2
TKR1443
M4x10mm Button Head Screw
x1
TKR1445
M4x14mm Button Head Screw
x2
TKR1528
M3x18mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
*TKR9090A
(option)
*TKR9163
*TKR9163B
*TKR9163C
(option)
*TKR9164
*TKR9164B
*TKR9164C
(option)
*TKR9090A
(option)
7
Thread
Lock
Note: THIS IS A PLACEHOLDER
SCREW AND IS REPLACED BY
A LONGER SCREW IN STEP M-5.
Note: Repeat this step for the other side.
Note: Repeat this step for the other side.

TKR9534
TKR1201
TKR1201
TKR9545
TKR9545
TKRBB06135F
TKRBB06135F
TKR1609
TKR5571M
TKR9545
TKR9587
TKRBB06135F
Flanged Ball Bearing (6x13x5)
x4
TKR1201
M3 Locknut Black
x4
Step
F-1
Step
F-2
Thread
Lock
TKR1609
M3x3mm Set Screw
x2
Note: These screws
only need to be
snug. Do not
over-tighten.
Bag F
Rear Hub
8
Note: Make two of these assemblies.
Note: Repeat on other side.
*TKR5571A
(Option)
Wheelbase Shims
3mm
0mm

TKR1201
TKR1211
TKR1221
TKR1529
TKR1529
Step
F-3
35.50mm
Note: Notch always
goes on left side of vehicle.
Actual Size
Step
F-4
Build Note: Hold the turnbuckle stationary
with pliers and push the rod end hard onto the
turnbuckle while turning at the same time.
Keep in mind that one end of the turnbuckle has
normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-o” when
adjustments are being made.
Right
Left
TKR5053A
TKR5188B
TKR8052A
TKR5188B
TKR5188B
TKR9550
TKR9550
TKR5188B
TKR5053A
TKR8052A
Bag F
Rear Camber Links
9
TKR1211
M3 Lock Nut Flange Black
x2
TKR1201
M3 Locknut Black
x4
TKR1529
M3x20mm Cap Head Screw
x4
1
2
3
4
5
6
Stock position is 1/C
Note: Repeat on other side.
TKR1221
M3x8mm Washer
x2

TKR1601
TKR1238
TKR1445
TKR9017
TKR1601
TKR1443
Bag G
Front End
Assembly
TKR1601
TKR5049A
TKR1528
TKR9561
TKR9516
*TKR9090A
(option)
*TKR9090A
(option)
TKR9020
TKR9561
TKR5056
TKR5079A
TKR9017
TKR9217
TKR9217
TKR9577 - 2.1mm
Step
G-1
Step
G-2
Step
G-3
Step
G-4
TKR1238
M4x10mm Droop Screw
x2
TKR1445
M4x14mm Button Head Screw
x2
TKR1443
M4x10mm Button Head Screw
x1
TKR1528
M3x18mm Cap Head Screw
x2
TKR1601
M3x4mm Set Screw
x4
10
Thread
Lock
Optional Sway Bars
(sold separately)
*TKR9577 - 2.2mm
*TKR9577 - 2.3mm
*TKR9577 - 2.4mm
*TKR9577 - 2.5mm
*TKR9578 - 2.6mm
*TKR9578 - 2.7mm
*TKR9578 - 2.8mm
*TKR9578 - 2.9mm
*TKR9578 - 3.0mm
Note: THIS IS A PLACEHOLDER
SCREW AND IS REPLACED BY
A LONGER SCREW IN STEP J-6.
Note: Repeat this step for the other side.
Note: Repeat this step for the other side.
*TKR9162
*TKR9162B
(option)
*TKR9161
*TKR9161B
(option)

Bag H
Front Spindle &
Carrier Assembly
Step
H-1
Step
H-2
Step
H-3
TKRBB06135F
TKR5571M
TKRBB06135F
TKR1609 TKR9542
TKR1201
TKR9534
TKR9543
TKR9543
TKR1613
TKR9587
TKR9541
Thread
Lock
TKRBB06135F
Flanged Ball Bearing (6x13x5)
x4
TKR1201
M3 Locknut Black
x4
x4
TKR1613
M3x12mm Screw Pin
TKR1609
M3x3mm Set Screw
x2
Note: These screws
only need to be
snug. Do not
over-tighten.
Note: This pin is longer.
Note: This pin is shorter.
Note: Make two of these assemblies.
Note: Make two of these assemblies.
Note: Repeat on other side.
11
*TKR5571A
(Option)
Note: Make sure to use the (R) right
side spindle with the (R) right side
spindle carrier, and the (L) left side
spindle with the (L) side spindle carrier.
RIGHT SIDE

TKR5053A
Right
Left
Front Camber Links
TKR9059B
TKR8052A
TKR5187B
TKR5187B
TKR9523
TKR9523
TKR9059B
TKR5053A
TKR8052A
Bag H
Front Camber Links
Step
H-4
Step
H-5
Build Note: Hold the turnbuckle stationary
with pliers and push the rod end hard onto the
turnbuckle while turning at the same time.
Keep in mind that one end of the turnbuckle has
normal threads and the other has reverse threads.
Start the rod end straight and it will thread on straight.
Build Tip: Use some grease or Chapstick
on the threads to help prevent “pop-o” when
adjustments are being made.
24.50mm
Note: Notch always
goes on left side of vehicle.
Actual Size
TKR1211
TKR1529
TKR1529
TKR1221
TKR1201
TKR1211
M3 Lock Nut Flange Black
x2
TKR1221
M3x8mm Washer
x4
TKR1529
M3x20mm Cap Head Screw
x4
TKR1201
M3 Locknut Black
x2
12
Stock position is 3/A
4
5
6
Note: Repeat on other side.

Steering Links
Stock Position
(middle hole)
Note: Insert this screw now because
it will be much harder to do later.
It will not fall out.
(front of vehicle)
28.75mm
Note: Notch always
goes on left side of vehicle.
Actual Size
Right
Left
TKR8052A
TKR5056
TKR8052A
TKR5056
TKR9523
TKR5056 TKR9523
TKR5056
TKR8052A
TKR8052A
Thread
Lock
Step
I-1
Step
I-2
Step
I-3
Step
I-4
TKR5103
TKR1403
TKRBB050825RS
TKRBB050825RS
TKRBB06103
TKR1240
TKR1529
TKR1403
M3x10mm Button Head Screw
x2
TKR5101X
* OR TKR5231
TKR9517
TKRBB06103
TKR5231 TKR9521
TKRBB050825RS
TKRBB050825RS
TKR9517
TKR1403
TKR9517
*TKR5122
(option)
TKR9517
*TKR5122
(option)
TKR5231
TKR1201
TKR1221
TKR1221
Note: Tighten nut all the
way down, then back it o
2 full turns.
Note: Fit this
o-ring inside
the groove
of the nut
above it.
Note: Can use
17mm wheel
wrench here.
TKR1201
M3 Lock Nut Black
x2
TKRBB06103
Ball Bearing (6x10x3)
x4
TKRBB050825RS
Ball Bearing (5x8x2.5)
x4
TKR1529
M3x20mm Cap Head Screw
x2
TKR1240
M3x18mm Shock Mnt Screw
x1
TKR1221
M3x8mm Washer
x4
Bag I
Steering
Assembly
13
Note: Repeat on other side.

Step
J-1
Step
J-2
Step
J-3
TKR9062B
TKR1344
TKR1344
TKR1343
TKR9508
TKR1324
TKR1525
Thread
Lock
Thread
Lock
Note: Use assembly
from step I-4.
TKR1324
M3x12mm Flat Head Screw
x2
TKR1343
M4x10mm Flat Head Screw
x2
TKR1344
M4x12mm Flat Head Screw
x2
TKR9102A
TKR1443
TKR1444
TKR9630
TKR1447
TKR1525
M3x14mm Cap Head Screw
x2
TKR1443
M4x10mm Button Head Screw
x2
TKR1444
M4x12mm Button Head Screw
x2
TKR1447
M4x16mm Button Head Screw
x1
Bag J
Front End Assembly
14

TKR1201
TKR1445
TKR9660
TKR1221
TKR1346 x 2pcs
TKR9660
TKR1350 x 2pcs
Step
J-4
Step
J-5
Step
J-6
TKR1221
M3x8mm Washer
x4
TKR1528
M3x18mm Cap Head Screw
x2
TKR1408
TKR1445
M4x14mm Button Head Screw
x1
Note: REMOVE THIS PLACEHOLDER
SCREW AND DO NOT USE!!!
IT IS REPLACED BY A LONGER SCREW
IN THE NEXT STEP BELOW.
TKR1528
TKR1201
M3 Locknut Black
x2
TKR1408
M3x18mm Button Head Screw
x2
TKR1350
M4x25mm Flat Head Screw
x2
TKR1346
M4x15mm Flat Head Screw
x2
Bag J
Front/Rear Assembly
15

Note: Use a servo with at
least 250 in/oz torque.
Note: Route servo wire
through hole.
(50-120 ft Straight)
Small Track
(pinion)
Large Track
(pinion)
(120-180 ft Straight)
Motor
550/3660
4-Pole Battery
MOD 1 Gearing Recommendations
4600kv 2 Cell
2 Cell
2 Cell
2 Cell
2 Cell
2 Cell
3 Cell
3 Cell
4300kv
4000kv
3800kv
3500kv
3200kv
3200kv
3000kv
14 tooth
13 tooth
(not recommended)
15 tooth
16 tooth
17 tooth
18 tooth
20 tooth
14 tooth
15 tooth
16 tooth
17 tooth
18 tooth
20 tooth
14 tooth
3 Cell
2800kv 16 tooth 17 tooth
16 tooth
3 Cell
2400kv 18 tooth 19 tooth
TKR1522
TKR1522
TKR9525R
TKR1525 x2pcs
TKR1221 x2pcs
TKR1525 x2pcs
TKR1221 x2pcs
Step
K-2
Step
K-1
TKR1346
M4x15mm Flat Head Screw
x1
Thread
Lock
TKR1525
M3x14mm Cap Head Screw
x4
TKR1346
TKR9510
TKR9512
Motor (not included)
Servo (not included)
TKR1522
M3x8mm Cap Head Screw
x2
TKR1221
M3x8mm Washer
x4
Bag K
Motor/Servo
16
Note: Laser etched numbers indicates what
MOD 1 pinion is to be used with each set
of holes. Match the corresponding color
for the second hole.
Note: These gearing recommendations
are just starting points. Each user might
have to adjust based on batteries used,
individual preferences, and specific tracks.
Note: Gearing recommendations in RED
require the use of TKR9511 motor mount.
This mount is not included and sold separately.
Note: TKR9511 can be used
here if using any pinion below 16 tooth.
*Sold separately.
1 Piece Motor Mount

TKR9527
TKR1401
Thread
Lock
TKR1323
TKR1401
TKR1325
TKR1344
Step
K-4
Step
K-3
Thread
Lock
TKR1344
TKR1323
ESC (not included)
Note: Use a heavy duty double sided
tape to mount ESC. You can also
use a zip-tie for additional security
(not included).
Note: Run the servo wire
under the front chassis brace.
Assembly from step K-1
Bag K
Motor/Servo/
Mud Guards/ESC
17
ESC Mounting Options
Mounting holes to chassis.
Zip-Tie cutouts.
Traxxas ESC holes.
Tekin or HobbyWing ESC holes.
TKR1323
M3x10mm Flat Head Screw
x5
TKR1344
M4x12mm Flat Head Screw
x5
TKR1325
M3x14mm Flat Head Screw
x3
TKR1401
M3x6mm Button Head Screw
x4
Electronics Wiring Diagram
Note: Refer to this diagram during build step L-2.

1mm
Actual Size
Step
L-2
Step
L-3
Step
L-5
Step
L-4
Step
L-1
TKR1327
M3x16mm Flat Head Screw
x1
TKR1325
M3x14mm Flat Head Screw
x1
TKR1341
M4x6mm Flat Head Screw
x6
Thread
Lock
TKR5058A
TKR5056
TKR1327
TKR9553M
TKR1211
TKR1211
TKR1221
TKR1401
TKR1401
TKR1341
TKR1401
TKR9514
*TKR9019
(option)
TKR9525L
TKR1325
TKR1401
TKR1601
TKR5126
TKR1341
TKR1401
TKR1221
TKR5230
TKR5056
TKR5058A
TKR1401
TKR9527
Servo Screw
(not included)
Note: Install battery
strap as show in the
image. Do this before
moving to the next step.
Note: Refer to the Wiring Diagram
on the previous page during this
step. Wires from the ESC and servo
will be routed beneath the small wire
guides in this step. It is important to
keep all loose wires carefully routed
to avoid being damaged by the
center driveshaft.
Note: Using TKR1240 screw
that was previously installed
in a prior step. Use caution to
avoid pushing it out of place.
Note: This screw goes up
through the bottom of the chassis.
TKR1221
M3x8mm Washer
x2
TKR1401
M3x6mm Button Head Screw
x7
TKR1601
M3x4mm Set Screw
x1
Receiver
(not included)
TKR1211
M3 Lock Nut Flange Black
x2
TKR9525L
Bag L
Battery Tray/
Servo Link
18

TKR9191
TKR5144
TKR9512
TKR1344
TKR1524
TKR9512
TKR1524
TKR1524
Pinion Gear
(not included)
Set Screw
(not included)
TKR1528
TKR9062B
TKR9630
Bag M
Center Di/
Rear End
Di assembly
from page 3.
Step
M-1
Step
M-2
Step
M-3
19
Thread
Lock
TKR1528
M3x18mm Cap Head Screw
x1
TKR5144
Dierential 0-rings
x1
TKR1524
M3x12mm Cap Head Screw
x6
TKR1344
M4x12mm Flat Head Screw
x3
(all parts can also be purchased separately)
TKR9585 - Optional Center Brace
TKR5187B
TKR5053A
TKR1618
TKR1618
TKR5053A
TKR5187B
TKR9585

TKR1528
TKR1445
TKR9660
TKR9660
TKR1444
TKR1344
TKR1346
TKR1350
TKR1325 TKR1323
TKR1525
Bag M
Rear End
Step
M-4
Step
M-5
Step
M-6
20
TKR1525
M3x14mm Cap Head Screw
x2
TKR1344
M4x12mm Flat Head Screw
x1
TKR1346
M4x15mm Flat Head Screw
x2
TKR1350
M4x25mm Flat Head Screw
x2
Note: REMOVE THIS PLACEHOLDER
SCREW AND DO NOT USE!!!
IT IS REPLACED BY A LONGER SCREW
IN THE NEXT STEP BELOW.
TKR1445
M4x14mm Button Head Screw
x1
TKR1444
M4x12mm Button Head Screw
x2
TKR1528
M3x18mm Cap Head Screw
x2
TKR1323
M3x10mm Flat Head Screw
x2
TKR1325
M3x14mm Flat Head Screw
x2