
Astra-321 M
Electro-Contact Panic Button
User Instruction*
Sales:
Controlex GmbH
Philosophenweg 31-33
47051 Duisburg,Germany
+49 (0) 203/393 91 188
info@controlex.eu
www.controlex.eu
Warranty service and
technical support:
TEKO-TD
Prospekt Pobedy str. 19
420138 Kazan, Russia
+7(843) 261-55-75
www.teko.biz
Made in Russia
Rev. 321-mv1_0_instr_EN
1 FUNCTION
The detector is untended for manually switching
on the alarm signal by pressing the button and
transferring the alarm signal to control panel or
notification transmission system.
2 SPECIFICATIONS
Switching voltage, V, max..............................72
Switching current, A, max .............................0.2
Overall dimensions, mm.....................87×60×30
Operating Conditions
Temperature range, °С........from - 30 up to +50
Relative air humidity, % ............up to 95 at +25 °С
Withoutmoisture condensation
3 DELIVERY SET
Delivery set contains key –2 pcs., holders and
fasteners (dowel –2 pcs., screw –2 pcs.).
4 OPERATING MODE
The detector generates an alarm signal once
the detector button is pressed.
The button is mechanically locked in the
“Alarm” status by a spring.
A key is used to reset the detector to the
standby status.
5 INSTALLATION LOCATION
The detector shall be mounted in a concealed,
discreet location for prompt and inconspicuous
use.
6 INSTALLATION PROCEDURE
2) Remove the blank
in the detector base.
Lead alarm loop
wires through the
wire insertion hole.
Affix detector
3) Perform wiring
(see par.7)
5) Perform detector
operability
(see par.8)