Tektronix MTS4000 MPEG User manual

xx
MTS4KUP
10GS, ASI, ESE, ESS, GEN, IPTV, LX, PB, PQ, QB2, S2, SX,
VQ, VS, and ZX
MTS4000 Upgrade Kits
ZZZ
Instructions
*P075103600*
075-1036-00

MTS4KUP
10GS, ASI, ESE, ESS, GEN, IPTV, LX, PB, PQ, QB2, S2, SX, VQ,
VS, and ZX
MTS4000 Upgrade Kits
ZZZ
Instructions
xx
www.tektronix.com
075-1036-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Table of Contents
General Safety Summary ......................................................................................... iv
Service Safety Summary.......................................................................................... vi
Kit description .................................................................................................... vii
Kit parts lists ........................................................................................................ 1
Software upgrade instructions..................................................................................... 5
Hardware upgrade instructions.................................................................................... 7
Optical SFP upgrades ............................................................................................. 17
MTS4000 Upgrade Kit Instructions i

Table of Contents
List of Figures
Figure 1: IPTV interface card bumper installation ............................................................. 8
Figure 2: QB2, S2, and VS interface cards bumper installation............................................... 8
Figure 3: Remove rear panel..................................................................................... 10
Figure 4: CIP cable installation on option IPTV interface card.............................................. 12
Figure 5: COM connectors on motherboard.................................................................... 13
Figure 6: CIP cable installation on option QB2, S2, and VS interface cards............................... 14
Figure 7: Sample SFP optical module........................................................................... 17
ii MTS4000 Upgrade Kit Instructions

Table of Contents
List of Tables
Table 1: Recommended tool list .................................................................................. 7
Table 2: Interface card slot locations............................................................................. 9
MTS4000 Upgrade Kit Instructions iii

General Safety Summary
General SafetySummary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
To Avoid Fire or Personal
Injury
Use proper power cord. Use only the power cord specified for this product and
certified for the country of use.
Ground theproduct. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
The inputs are not rated for connection to mains or Category II, III, or IV circuits.
Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.
Power disconnect. The power cord disconnects the product from the power source.
Donotblockthepowercord;itmustremain accessible to the user at all times.
Do not operate without covers. Do not operate this product with covers or panels
removed.
Do not operate with suspected failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when
power is present.
Wear eye protection. Wear eye protection if exposure to high-intensity rays or
laser radiation exists.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation. Refer to the manual's installation instructions for details
on installing the product so it has proper ventilation.
iv MTS4000 Upgrade Kit Instructions

General Safety Summary
TermsinThisManual These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
Symbols and Terms on the
Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read
the marking.
WARN ING indicates an injury hazard not immediately accessible as you
read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
MTS4000 Upgrade Kit Instructions v

Service Safety Summary
Service Safety Summary
Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary before performing any service
procedures.
Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect Power. To avoid electric shock, switch off the instrument power, then
disconnect the power cord from the mains power.
Use Care When Servicing With Power On. Dangerous voltages or currents may
exist in this product. Disconnect power, remove battery (if applicable), and
disconnect test leads before removing protective panels, soldering, or replacing
components.
To avoid electric shock, do not touch exposed connections.
vi MTS4000 Upgrade Kit Instructions