Tektronix AWGSYNC01 Installation and maintenance instructions

AWGSYNC01
Declassification and Security
Instructions
*P077102600*
077-1026-00

AWGSYNC01
Declassification and Security
Instructions
www.tektronix.com
077-1026-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions. Tektronix products
are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all
previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
■In North America, call 1-800-833-9200.
■Worldwide, visit www.tektronix.com to find contacts in your area.

Table of Contents
Preface ................................................................................................................................................ iii
Memory devices
Nonvolatile memory devices .......................................................................................................... 1
Data export devices ........................................................................................................................ 1
Clear or sanitize a non-functional instrument
Charges ........................................................................................................................................... 3
AWGSYNC01 Declassification & Security Instructions i

Table of Contents
ii AWGSYNC01 Declassification & Security Instructions

Preface
This document helps customers with data security concerns to sanitize or remove
memory devices from the Tektronix AWGSYNC01 HUB.
These products have data storage (memory) devices and data output devices.
These instructions tell how to clear or sanitize the memory devices and disable
the data output devices. The instructions also tell how to declassify an instrument
that is not functioning.
Reference
The procedures in this document are written to meet the requirements specified
in:
■NISPOM, DoD 5220.22–M, Chapter 8
■ISFO Process Manual for Certification & Accreditation of Classified Systems
under NISPOM
Products
The following Tektronix products are covered by this document:
■AWGSYNC01
Terms used in this document
The following terms may be used in this document:
■Clear. This removes data on media/memory before reusing it in a secured
area. All reusable memory is cleared to deny access to previously stored
information by standard means of access.
■Erase. This is equivalent to clear.
■Instrument Declassification. A term that refers to procedures that must be
undertaken before an instrument can be removed from a secure environment.
Declassification procedures include memory sanitization and memory
removal, and sometimes both.
■Media storage/data export device. Any of several devices that can be used
to store or export data from the instrument, such as a USB port.
■Nonvolatile memory. Data is retained when the instrument is powered off.
■Remove. This is a physical means to clear the data by removing the memory
device from the instrument. Instructions are available in the product Service
Manual.
■Sanitize. This eradicates the data from media/memory so that the data cannot
be recovered by other means or technology. This is typically used when the
device will be moved (temporarily or permanently) from a secured area to a
non-secured area.
■Scrub.This is equivalent to sanitize.
■User Accessible. User is able to directly retrieve the memory device
contents.
AWGSYNC01 Declassification & Security Instructions iii

■User-modifiable. User can write to the memory device during normal
instrument operation, using the instrument interface or remote control.
■Volatile memory. Data is lost when the instrument is powered off.
Device terms
The following terms are used with the memory devices in this document:
■User data. Describes the type of information stored in the device. Refers to
waveforms or other measurement data representing signals connected to the
instrument by users.
■User settings. Describes the type of information stored in the device. Refers
to instrument settings that can be changed by the user.
■Both. Describes the type of information stored in the device. It means that
both user data and user settings are stored in the device.
■None. Describes the type of information stored in the device. It means that
neither user data nor user settings are stored in the device.
■Directly. Describes how data is modified. It means that the user can modify
the data.
■Indirectly. Describes how data is modified. It means that the instrument
system resources modify the data and that the user cannot modify the data.
Preface
iv AWGSYNC01 Declassification & Security Instructions

Memory devices
There are no volatile memory devices in this product.
Nonvolatile memory devices
Flash
Type and size Flash 512 Mbits
Function Holds instrument calibration data, serial number, and FPGA image.
Type of user information
stored
None
Method of modification Indirect
Data input method Firmware operations
Location Trigger board
User accessible No
To clear Not applicable. This device does not contain user data or settings. Clearing would disable
instrument functionality.
Process to sanitize Not applicable. This device does not contain user data or settings. Sanitizing would disable
instrument functionality.
Data export devices
There are no media or export devices that require declassification or security
procedures with this product.
AWGSYNC01 Declassification & Security Instructions 1

Memory devices Data export devices (cont.)
2 AWGSYNC01 Declassification & Security Instructions

Clear or sanitize a non-functional instrument
There are no procedures to clear or sanitize a non-functioning instrument. Please
return your instrument to Tektronix repair.
Charges
Replacement of any missing hardware will be charged according to the rate at the
time of replacement.
AWGSYNC01 Declassification & Security Instructions 3

Clear or sanitize a non-functional instrument
4 AWGSYNC01 Declassification & Security Instructions