Teldat Regesta Smart PRO User manual

Regesta Smart PRO
Installation Manual
Copyright© Teldat Dm1002-I Version 1.0 12/2019 Teldat S.A.
Teldat S.A. Manual
Regesta Smart PRO 1

Legal Notice
Warranty
This publication is subject to change.
Teldat S.A. offers no warranty whatsoever for information contained in this manual.
Teldat S.A. is not liable for any direct, indirect, collateral, consequential or any other damage connected to the deliv-
ery, supply or use of this manual.
Manual Teldat S.A.
2 Regesta Smart PRO

Table of Contents
Chapter1 AboutThisManual................................. 1
1.1 SupportedDevices................................... 1
1.2 Who should read this manual? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 When should this manual be read? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Whatisinthismanual?................................. 1
1.5 Whatisnotinthismanual? ............................... 1
1.6 How is the information organized? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.7 Riskidentification.................................... 1
1.8 SafetyWarnings.................................... 3
1.9 RelatedDocumentation................................. 4
1.10 TechnicalSupport ................................... 4
Chapter2 ProductOverview.................................. 5
2.1 GeneralDescription................................... 5
2.2 DeviceModels..................................... 6
2.3 HardwareFeatures................................... 7
2.4 Components...................................... 8
2.4.1 FrontPanel...................................... 8
2.4.2 ConnectorPanel.................................... 9
2.4.3 UndersidePanel................................... 12
2.5 PowerSupply.................................... 12
2.5.1 ACPowerSupply .................................. 13
2.5.2 DCPowerSupply .................................. 13
2.5.3 Multi-Range (MR) Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Chapter 3 Installing the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3.1 WorkplaceConditions ................................ 14
3.2 Removing/Installing the Connectors Protector . . . . . . . . . . . . . . . . . . . . . . 14
3.3 Installing a DIN rail mount accessory . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.4 Wallmounting.................................... 17
Chapter 4 Connecting the router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.1 PowerSource.................................... 19
4.1.1 PowerConnectorpins................................. 19
4.1.2 PowerConnectorcable................................ 20
Teldat S.A. Table of Contents
Regesta Smart PRO i

4.1.3 Connecting ..................................... 21
4.1.4 Disconnecting.................................... 21
4.2 Dataconnections................................... 21
4.2.1 LANconnection ................................... 21
4.2.2 WANconnections................................... 21
4.2.3 4-port Ethernet Switch connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.2.4 WWAN Antenna connections (RF connectors) . . . . . . . . . . . . . . . . . . . . . . 23
4.2.5 SerialPortsconnections................................ 25
4.3 InstallingtheSIMcard................................. 26
4.3.1 IdentifyingtheSIMtrays................................ 27
4.3.2 Procedure to install the SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.4 RSTButton..................................... 28
4.4.1 Restartingthedevice................................. 28
4.4.2 DefaultConfiguration................................. 28
4.5 Troubleshooting................................... 28
4.6 Updatingthesoftware................................. 29
4.6.1 Connectingtotherouter................................ 29
Chapter5 Compliance.................................... 31
5.1 ManufacturerInformation............................... 31
5.2 Intended use of the equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.3 EC Declaration of Conformity (No Radio version) . . . . . . . . . . . . . . . . . . . . . 31
5.4 EC Declaration of Conformity (Radio version) . . . . . . . . . . . . . . . . . . . . . . 32
5.5 CEMarking..................................... 32
5.6 NationalRestrictions................................. 32
5.7 OperatingFrequency................................. 32
5.8 REACH....................................... 32
5.9 WEEEInformation.................................. 33
Appendix A Technical Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
A.1 Connectors ..................................... 34
A.1.1 LANConnector.................................... 34
A.1.2 WANBase-TConnector................................ 34
A.1.3 WANSFPConnector................................. 34
A.1.4 LANSwitchConnector ................................ 35
A.1.5 WWAN/RFConnectors................................ 35
A.1.6 ConfigurationConnector................................ 35
A.1.7 RS-232 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
A.1.8 RS-485 Serial Port Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Table of Contents Teldat S.A.
ii Regesta Smart PRO

A.1.9 PowerSupplyConnector ............................... 36
A.2 TechnicalSpecifications................................ 36
A.2.1 HardwareArchitecture................................. 36
A.2.2 LANInterface .................................... 37
A.2.3 WANBase-TInterface ................................ 37
A.2.4 SwitchInterface ................................... 37
A.2.5 WANSFPInterface.................................. 37
A.2.6 WirelessWANinterface................................ 38
A.2.7 ConfigurationInterface ................................ 38
A.2.8 RS-232SerialInterface................................ 38
A.2.9 RS-485SerialInterface................................ 38
A.2.10 Power Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
A.2.11 Dimensionsandweight................................ 39
A.2.12 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
AppendixB RadioInformation................................. 40
B.1 RFWWANSpecifications............................... 40
Teldat S.A. Table of Contents
Regesta Smart PRO iii

Chapter 1 About This Manual
This is the installation manual for the Regesta Smart PRO router and contains information on how to correctly install
this device in a working environment.
1.1 Supported Devices
The information provided in this installation manual only applies to the Regesta Smart PRO Series.
1.2 Who should read this manual?
This manual should be read by the person installing and configuring the Regesta Smart PRO router for the first time.
The installer should be familiar with network structures, terms, and concepts.
1.3 When should this manual be read?
Read this guide as soon as you are ready to familiarize yourself with the device and its components.
This manual will help you understand your new device in greater depth.
1.4 What is in this manual?
This installation manual contains the following information:
• A description of the available features in the Regesta Smart PRO router.
• Technical specifications.
• Power supply requirements.
• A description of the device LEDs and connectors.
• Troubleshooting.
1.5 What is not in this manual?
This manual does not contain information about the device software or its configuration. For information on how to
configure this device, please see the relevant protocol manuals found on the Teldat website:
http://www.teldat.com
1.6 How is the information organized?
Each chapter focuses on a specific part of the hardware and its components. All descriptive and technical specifica-
tions, as well as information on a given component, can be found in the relevant chapter.
1.7 Risk identification
WARNING: Signal word used to designate a potentially dangerous situation that
may cause severe injuries or death if not avoided.
Teldat S.A. 1 About This Manual
Regesta Smart PRO 1

1.8 Safety Warnings
              
          
  ! "        #   $
 %   &       " 
 
         '   
  (            
 
            
         )
    (        
    *        
     (      "DC-powered
device"  "AC-powered device"
+ ) #     )      , )  
   )          
              
     
       (   -    
  %  
  ,       ) -     
.       
 /  /'     0      
            ( 
    *  1 -   0 *
/  /'     0     
     #       ! 
     )  #    #  1 - 
   0 
 (     (     *   2345
-0    144 - -  (          467
2  8-9:1; <     0 =4226  
   )         !.  2345 -0 
 . 144 - 0    )     467 2
8-9: 1;<      0 =4226  !
1 About This Manual Teldat S.A.
2 Regesta Smart PRO

-        > -? :/'@A& &
'9 / '@+  (          8(  14 <
9  (*   (   (   8@< 
         8   <B    
           (   (  
         
      !    @A- ??-
'?- &  //-       8  14 <
  ) !      -)  8-<
) %       8 <  
         ) -,  ! 
    $     ! 
+ / &       (   0+-
1 +- / /'&@0
 C        *    1   
(   0D A =4;271E2446 
/)  A     )  +- / 0+-
1
+ ) C      *   $    
0+- 1       0D A =4;271E2446
A   ?  (    ( 
-(       (     ? 
-(           
9   ?       
8 &<
&    ?  
A    $ ?    
&           $ ?
&             $
-   $ ? #$   ! 8 &<
A      $ ?
 (     (  8(<   (       
( (  (        
+          8 <    
F     +          
        
Teldat S.A. 1 About This Manual
Regesta Smart PRO 3

1.9 Related Documentation
Teldat Dm709-I LAN Interfaces
Teldat Dm781-I Cellular Interface
Teldat Dm748-I Software Updating
1.10 Technical Support
Contact information:
Web: http://www.teldat.com
Tel.: [phone]
Fax: [phone]
Email: suppor[email protected]
1 About This Manual Teldat S.A.
4 Regesta Smart PRO

Chapter 2 Product Overview
This chapter provides an overview of the features available for Regesta Smart PRO routers and its components. This
information includes:
•General Description on page 5
•Device Models on page 6
•Hardware Features on page 7
•Components on page 8
•Power Supply on page 12
2.1 General Description
The Regesta Smart PRO router family are industrial-grade routers that provide secure and reliable IP broadband
connectivity to telecontrol and telemetry networks in smart grid deployments.
The Regesta Smart PRO router family has been especially designed to operate in hostile and extreme environments.
Thanks to their ruggedized mechanics and special characteristics, which allow them to bear extreme temperatures,
these routers are particularly suited for: industrial environments, industrial telecontrol, distribution installations for
electricity, gas, water, etc.
The router guarantees optimal execution and maximum security of communications between multiple IP services. In
addition, the simultaneous use of 2G/3G/LTE interfaces and WAN Ethernet links provides maximum communications
reliability, which is ensured thanks to the full support of the management, supervision and backup functionalities.
The device incorporates a protective casing that prevents the connectors from being touched while the device is
powered.
Teldat S.A. 2 Product Overview
Regesta Smart PRO 5

Fig. 2: Regesta Smart PRO
2.2 Device Models
The following table lists the different models available for the Regesta Smart PRO router.
Table 1: Regesta Smart PRO models
Code Description
RWRTHR2ZAC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
RS232, AC powered (110 - 240 VAC).
RWRTHR2ZDC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
RS232, DC powered (12 - 72 VDC).
RWRTHR2ZMR Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
RS232, MultiRange power input (48 - 72 VDC, 110 - 240 VAC).
RWRTHR6ZAC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, AC powered (110 - 240 VAC).
RWRTHR6ZDC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, DC powered (12 - 72 VDC).
RWRTHR6ZMR Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, MultiRange power input (48 - 72 VDC, 110 - 240
VAC).
RWRTHR2LAC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
2 Product Overview Teldat S.A.
6 Regesta Smart PRO

RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41 - WCDMA 1, 5, 8), AC powered
(110 - 240 VAC).
RWRTHR2LDC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41 - WCDMA 1, 5, 8), DC powered
(12 - 72 VDC).
RWRTHR2LMR Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port, 1
RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41 - WCDMA 1, 5, 8), MultiRange
power input (48 - 72 VDC, 110 - 240 VAC).
RWRTHR6LAC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41
- WCDMA 1, 5, 8), AC powered (110 - 240 VAC).
RWRTHR6LDC Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41
- WCDMA 1, 5, 8), DC powered (12 - 72 VDC).
RWRTHR6LMR Regesta Smart PRO 1 LAN Gigabit Ethernet port, 1 WAN Combo Gigabit Ethernet port,
4xPort Gigabit Ethernet Switch, 1 RS232, 1xWWAN (Bands: LTE 1, 3, 5, 7, 8, 20, 38, 40, 41
- WCDMA 1, 5, 8), MultiRange power input (48 - 72 VDC, 110 - 240 VAC).
2.3 Hardware Features
The following lists the hardware platform features for Regesta Smart PRO router.
• External Power Input:
• Terminal Block 2 Poles 5.08 mm pitch connector.
• AC Version ("AC" models)
• Nominal: 110 - 240 VAC
• Absolute: 85 - 264 VAC
• Frequency : 50 - 60 Hz
• Power: 10 W
• DC Version ("DC" models)
• Nominal: 12 - 72 VDC
• Absolute: 9 - 80 VDC
• Power: 10 W
• MR Version ("MR" models)
• Nominal: 110 - 240 VAC, 48 - 72 VDC
• Absolute: 85 - 264 VAC, 40 - 85 VDC
• Frequency : 50 - 60 Hz (VAC)
• Power: 10 W
• LAN: RJ45 connector will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX,
and 1000Base-T
• WAN: Gigabit Ethernet Combo RJ45+SFP connector:
• RJ45 connector will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX, and
1000Base-T.
• SFP port will support 1000Base-X Fiber Ethernet standard SFP.
• Switch: Depending on the model. ("6" Models)
• 4xRJ45 connectors will support IEEE802.3 Ethernet over copper wiring standards of 10Base-T, 100Base-TX,
and 1000Base-T.
Teldat S.A. 2 Product Overview
Regesta Smart PRO 7

• Serial Ports.
• 1xRJ45 connector RS-232 port (DCE).
• 2xRJ45 connectors for RS-232 port (DCE) and/or RS-485 (2/4 wires). Its availability requires one additional ac-
cessory.
• WWAN: Depending on the model. ("L" models)
• 1xLTE Category 4 WWAN module with two SMA connectors.
• 2 Intenal SIM trays with 2FF form factor.
• External Reset/Recovery push button
2.4 Components
2.4.1 Front Panel
The front panel includes the status LEDs.
The following figure shows the front panel.
Fig. 3: Front Panel
While the device is in startup mode, LED Llights up in green. Once the device has started up, the LEDs indicate the
following:
Table 2: LEDs
LED Associated Inter-
face
Status Description
ON Power Off
Green
Device is not powered.
Device is powered.
SW Ethernet Switch in-
terface Off
Green
Ethernet Switch is disabled or connection is not established.
Ethernet connection (link) established in, at least, one port:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
SCellular interface Green
Amber
SIM1 operating SIM. This is processing traffic through the car-
rier for the SIM installed in this tray.
SIM2 operating SIM. This is processing traffic through the car-
rier for the SIM installed in this tray.
CCellular interface Red Cellular interface is unavailable, not installed or not registered.
2 Product Overview Teldat S.A.
8 Regesta Smart PRO

Amber
Green
The device has registered in the network and is establishing
the PDP connection.
The device is registered, PDP connection is established and
IP traffic can be sent through the CELLULAR interface.
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
LCellular interface
corresponding to
the active SIM.
Off
Red
Amber
Green
Cellular interface is not active.
Coverage level below -100dBm.
Coverage level between -90dBm and -100dBm.
Coverage level above -90dBm.
LAN Ethernet LAN inter-
face Off
Green
Ethernet LAN is disabled or connection is not established.
Ethernet connection (link) established:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
WAN Ethernet WAN in-
terface (RJ45) Off
Green
Ethernet WAN is disabled or connection is not established.
Ethernet connection (link) established:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
SFP Ethernet WAN in-
terface (SFP) Off
Green
SFP is not used.
Ethernet SFP connection (link) is established
S1 Multi standard seri-
al interface 1 Off
Green
Serial port 1 is disabled or not initialized.
Port is in active state, shows interface activity:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
S2 Multi standard seri-
al interface 2 Off
Green
Serial port 2 is disabled or not initialized.
Port is in active state, shows interface activity:
• Steady: Data is not being transferred.
• Flashing: Data is being transferred.
Note some LEDs may behave differently depending on how the device is configured.
2.4.2 Connector Panel
The connector panel is covered by a protective casing. To access the former, you need to remove the latter. For fur-
ther information on how to remove/install the protective casing, please see Removing/Installing the Connectors Pro-
tector on page 14.
The following figure shows the panel, which includes all Regesta Smart PRO router connectors.
Teldat S.A. 2 Product Overview
Regesta Smart PRO 9

Fig. 4: Connector Panel
The elements found in the connector panel are as follows:
Table 1: Front Panel Elements
Item Description
A RST. Reset button. For further information on how the reset button works, please see RST
Button on page 28.
B CONF. RJ-45 connector providing access to the device's local console for configuration and
monitoring purposes. (This connector can also be used as an RS-232 asynchronous DCE
serial port.)
For more information about the CONF connector, refer to:
-Console Connector as Serial Port (CONF connector) on page 25
-Configuration Connector on page 35
-Configuration Interface on page 38
C WAN Gigabit Ethernet. SFP connector.
For more information about the WAN interface with SFP connector, refer to:
-WAN connections on page 21
-WAN SFP Connector on page 34
-WAN SFP Interface on page 37
D WAN Gigabit Ethernet. RJ-45 connector.
For more information about the WAN interface with Base-T connector, refer to:
-WAN connections on page 21
-WAN Base-T Connector on page 34
-WAN Base-T Interface on page 37
E LAN Gigabit Ethernet Port.
2 Product Overview Teldat S.A.
10 Regesta Smart PRO

For more information about the LAN interface, refer to:
-LAN connection on page 21
-LAN Connector on page 34
-LAN Interface on page 37
F POWER. Power connection.
Depending on the model, the Regesta Smart PRO can be AC or DC powered.
For more information about the power connection options, refer to:
-Power Source on page 19.
-Power Supply Specifications on page 39
G 4xPort Gigabit Ethernet Switch. (Depending on the model)
For more information about the LAN interface, refer to:
-4-port Ethernet Switch connections on page 22
-LAN Switch Connector on page 35
-Switch Interface on page 37
H DCE RS-232 serial ports or RS-485 2-4 wires/RS-422.
The type of configuration of each port depends on the hardware configuration of the device
(model).
For more information on the connector for serial ports, RS-485 2-4 wires/RS-422 and DCE
RS-232, refer to:
RS232 option:
-RS-232 Serial Port on page 26
-RS-232 Serial Port Connectors on page 36
-RS-232 Serial Interface on page 38
RS485 option
-RS-485/RS-422 Serial Port on page 26
-RS-485 Serial Port Connectors on page 36
-RS-485 Serial Interface on page 38
I RF/WWAN antenna connectors for the Celluar interface, based on the model.
For more information about the Cellular interface, refer to:
-WWAN Antenna connections (RF connectors) on page 23
-WWAN/RF Connectors on page 35
-Wireless WAN interface on page 38
Refer to Installing the SIM card on page 26 for more information about SIM installation for
the Cellular interface.
Teldat S.A. 2 Product Overview
Regesta Smart PRO 11

2.4.3 Underside Panel
The router identification label is located on the underside panel. It has several perforations for different mounting op-
tions. The following figure shows the underside panel:
Fig. 5: Underside Panel
The following elements can be found on the underside panel:
Table 4: Underside Panel elements table
Item Description
A Slots for the accessories to attach the device to a DIN rail mount. For further in-
formation on this accessory, please see section Wall mounting on page 17.
B Platform where the label containing product information is placed. This label con-
tains information on the device model, MAC, serial number, etc.
2.5 Power Supply
Depending on the model, the Regesta Smart PRO offers three different Power Supply options.
Note
Before connecting the router, please, identify your model and read the following instructions carefully!
2 Product Overview Teldat S.A.
12 Regesta Smart PRO

2.5.1 AC Power Supply
The Regesta Smart PRO AC version is powered with an external AC source. Nominal power voltages are 110-240 V
AC.
2.5.2 DC Power Supply
The Regesta Smart PRO DC version is powered with an external DC source. Nominal power voltages are 12-72 V
DC.
2.5.3 Multi-Range (MR) Power Supply
The Regesta Smart PRO MR version can be powered using both DC and AC voltages. The nominal power voltages
are 110-240 V AC and 48 V DC.
Teldat S.A. 2 Product Overview
Regesta Smart PRO 13

Chapter 3 Installing the Router
This chapter describes the steps to successfully install the Regesta Smart PRO router. It contains the following sec-
tions:
•Workplace Conditions on page 14
•Removing/Installing the Connectors Protector on page 14
•Installing a DIN rail mount accessory on page 16
•Wall mounting on page 17
3.1 Workplace Conditions
Warning
This equipment must be installed in restricted access locations. Only trained and qualified personnel
are allowed to install, replace or service this equipment as instructed in this installation guide.
• The device should not be placed amongst papers, magazines or other elements that could hinder natural air circu-
lation.
• Knocks and/or strong vibrations should be avoided during transport, operation and storage.
Warning
3.2 Removing/Installing the Connectors Protector
The Regesta Smart PRO includes a protective case for connectors. Its main function is to prevent accidental electric-
al discharges, which can prove dangerous. Thanks to the casing, direct contact with connectors is avoided while the
device is operating.
Warning
This unit might have more than one power supply connection. All connections must be removed to de-
energize the unit.
To remove the case that protects the connectors, follow these steps:
In the middle of the front panel you will find a fastening mechanism. To remove the casing, rotate the fastening piece
90º to the right or left.
The following figure shows you how to remove the protective case from the device.
3 Installing the Router Teldat S.A.
14 Regesta Smart PRO
The electric current in power cables, telephone lines and communication cables is dangerous. To pre-
vent electric shocks, before installing, handling or opening the equipment covers, connect and discon-
nect the cables following the steps set forth in Connecting on page 21 and Disconnecting on page 21.

Slide up the case as shown:
Teldat S.A. 3 Installing the Router
Regesta Smart PRO 15