Teleco T-mate User manual

TELECO AUTOMATION SRL

Via dell’Artigianato, 16 - 31014 Colle Umberto (TV) ITALY

TELEPHONE: ++39.0438.388511 FAX: ++39.0438.388536 - www.telecoautomation.com

T-MATE App 868.3MHz

916MHz

868.3MHz

916MHz

TMATExxxAL/BL

115 mm

65 mm

25 mm

15 mm

DOC.: T770.04_EN

T-MATEXXXAL-BL DATE: 28/05/18

This document is the property of Teleco Automation Srl who reserves all reproduction and copying rights

Bluetooth

Product code

Characteristics

• Available in both 868.3MHz and 916MHz frequencies.

• Easy access via Bluetooth from any compatible device.

• Up to 50 programmable device commands.

• Possibility to create scenarios.

• Weekly timer to send commands at a specic date and time.

• Wired input for the connection of push-button or PIR to recall

a favourite scenario.

TMATExxxAL (power supply included)

TMATExxxBL

- 5 or 12-24Vdc

- PIR or push-button

input

Dimensions and connections

Thermoplastic ABS

Not suitable for direct UV exposure

The product must be xed vertically.

The product guarantees IP44 rating

if properly assembled.

1. +12 ÷ 24Vdc

2. GND (-)

3. +5Vdc

4. COMMON

5. N.O. CONTACT INPUT

* The Blue Series receivers are bidirectional. They can receive

and execute commands and send the status back to T-Mate

T-MATE: 5/12-24VDC BLUETOOTH INTERFACE, PROGRAMMABLE BY MEANS OF AN APP, TO CONTROL ANY

TELECO PRODUCT. UP TO 50 DEVICE COMMANDS CAN BE CREATED AND MEMORIZED IN MANY WIRELESS

RECEIVERS. WIRED INPUT (N.O.) TO CONNECT A PUSH-BUTTON OR A PIR.

A1234

Download the app T-Mate from App Store or Google Play. Check the compatibility with

your device rst. Once downloaded, it is possible to use it in DEMO mode, even without

any TMATExxxAL/BL paired.

Pairing

Activate the Bluetooth communication on your device and power TMATExxxAL/BL ON.

Launch the T-Mate app.

Note: In the Android devices the localization function must be activated.

Setup rooms

Open Setup menu ► Detecting boards, tap on “+”, insert the new installation name

and insert the Code of the T-Mate. Tap on “Connect“ button to pair the device.

Tap on the icon to enter in the

room. Set the name and assign

a picture amongst the 6 provided

or select a picture of your device

gallery.

Create new rooms accessing the

menu “Rooms” in Setup.

Tap “+” to add a room

Adding commands to a room

Tap “+” to add remote commands.

Select the type of controlled device

from the list.

Name

Enable if the receiver

is Blue Series

Enable the timer

commands

List of available

commands

Add to

favourites

Note: swipe a device left to remove from the list.

Note: swipe a listed room left to delete it.

Note: swipe a listed command left to delete it.

Memorizing commands in the receivers

Once the command is added and the type is congured, it must be memorized in the receiver to be controlled

following the procedure included in the manual of the receiver.

Backside label Internal label

Installation

General

switch for all

the set timers

Set dates

When transmitters or

the wired input are

programmed, these

icons are ON

Create new scenarios accessing the menu

“Scenarios” in Setup. Tap “+” to add a scenario.

Tap the

command

button to set

the timers

Open Setup menu ►

Devicename ► Schedule

to set system date/time. It’s

possible to set 2 groups

of days: weekdays and

weekend. Tap on the day

names to add in the groups.

Setup scenarios

Set the name and assign an icon amongst the 9 provided.

Tap “+” to add remote commands

from any room.

Select the type of controlled

device from the list.

Name

Once the scenario has been completed, it’s possible to assign it to a transmitter button or to a wired N.O. button

connected to the input 4-5.

Tap and press the transmitter button to assign.

Tap and press the transmitter button to delete.

Tap to delete all the associated transmitter buttons.

Enable/disable the scenario

recall on the wired input.

Note: swipe a listed remote commands left to delete it.

Note: swipe a listed scenario left to delete it.

Advanced scenario programming

Memorized

Smartphone

Open Setup menu ► Detecting boards ► Connect to “T-Mate” board ► Tap on “Backup“ button.

New

Smartphone

Open Setup menu ► Detecting boards ► Connect to “T-Mate” board ► Tap on “Restore“ button.

A1234

The smartphone must have an internet connection active.

Once the backup procedure has been completed close the T-Mate App.

Launch the T-Mate app.

The smartphone must have an internet connection active.

Launch the T-Mate app.

Backup function

Restore function

Example of use

Device commands: Home page ► Rooms ► select room ► select device command

Feedback

(tap to ask)

Feedback

(tap to ask)

Feedback

(tap to ask)

Feedback

(tap to ask)

Tap to go to

next preset

level

Keep

to dim

Keep

to dim

DOWN

Tap to go to

next preset

level

Keep

to dim

Keep

to dim

DOWN

Execute the

scenario

Status of the

single receivers

associated (if

part of Blue

Series)

IMPORTANT! READ CAREFULLY THESE INSTRUCTIONS BEFORE INSTALLING AND

COMMISSIONING THE PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

PRODUCT INSTALLATION

The product at issue must be installed, commissioned and maintained only by licensed and authorised people, respecting the laws concerning the electrical

installations. The manufacturer is not responsible for any damage due to wrong installation or improper use.

SAFETY INFORMATION

The radio signal reception of the device could be disturbed by the presence of electrical disturbances being transmitted by other appliances working on the

same frequency or if the product is somehow shielded by metal parts. Do not use the device in places or where systems are sensitive to radio emissions

(e.g. airports, hospitals). The operator is in no way protected against interference from other telecommunication equipment or systems (e.g. authorised radio

systems working on the same frequency range). If you are having problems with its range of action, x the device up high.

PRODUCT DISPOSAL

At the end of this product’s useful life, it must not be disposed of as domestic waste, but must be taken to a collection centre for waste electrical and electronic

equipment. It is the user’s responsibility to dispose of this appliance through the appropriate channels at the end of its useful life. Failure to do so may incur

the penalties established by laws governing waste disposal.

The manufacturer, Teleco Automation s.r.l, declares that the type of radio equipment is compliant with Directive 2014/53/EU. The full text of the EU compliance