Telefunken TF-DVD5062 User manual

DVD PLAYER/
DVD-ПРОИГРЫВАТЕЛЬ
TF-DVD5062
Instruction manual
Руководство по
эксплуатации

Table of contents
Table of contents
2
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read this
manual carefully before connecting, operating and/or adjusting the product and keep the
manual for reference in the future.
9
9
9
9
10
10
10
10
10
10
10
11
11
12
12
12
12
13
13
14
14
14
15
15
15
16
16
17
Table of contents
Before you start
Utilization of the product
Important safeguards
Supported formats
Connection
Video/audio system connection
Operation
Front panel
Rear panel
Remote controller
Changing the battery
Button functions
Open/close
Power
Title
Subtitle
Angle
Menu
Play/pause
Cursor buttons
Number buttons
Enter
Stop
FWD
REV
PREV/NEXT
Prog
Slow
Setup
N/P
Repeat
A-B
DVD/USB
Language
PBC
Resume
Zoom
2
3
3
3
4
5
5
6
6
6
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
9
9
9
9
9
9
9
9
9
9
9
L/R
Remain
Video
Volume+/Volume-
Mute
OSD
Time
Copy
Return
System setup
General setup
Audio setup
Dolby setup
Video setup
Preference setup
Other functions
Ripping
MP3/JPEG/compressed video playback
How to create a playlist
Copying data
Deleting data from USB
USB background
General information
Handling compact discs
Cleaning discs
Troubleshooting
Accessories
Specification

Before you start
Before you start
3
If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so, you
will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
Utilization of the product
Important safeguards
Alerts the user to the presence
of dangerous voltage within the
product’s enclosure.
Alerts the user to the presence
of important operating
instructions.
To reduce the risk of electric shock
or fire, do not open the cover. Refer
servicing to qualified service
personnel.
This mark indicates this unit belongs
to class 1 laser product.
• To prevent the risk of fire or electric
shock, do not let water come into contact with
the device and don’t use the device in high
humidity conditions.
• The device is equipped with high voltage
components and a laser system, hence you
should not open the device and repair it by
yourself. The laser beam is dangerous to eyes
when the housing is removed. Do not look at it!
• When the device is moved from cold
premises to the warm room or vice versa,
condensate may form on the laser head and
the device may not operate properly. In this
case please turn the device on for 1-2 hours
without a disc before playback to heat it to a
proper operating temperature.
• Don’t try to manually open or close the
disc tray to load discs.
• Turn off the receiver only when there is no
disc inside.
• If you are not going to use the device for a
long time unplug it from the wall outlet.
• Before turning the device on, please make
sure you have connected it properly, adjust the
volume of speakers and amplifiers of your audio
system to the minimum. Adjust the volume
as necessary only after normal playback has
started to avoid damage of your audio system.
• Use power sources of rated voltage,
otherwise the unit may not function or may be
damaged.
• Place the unit on a horizontal surface.
Keep the unit ventilated. Don’t block the heat
hole. Overheat may cause malfunction.
• Do not place any objects on the unit cover,
this may make it function improperly (incorrect
playback).
• Please place the device in a dry and
well-aired area. Do not place it near heating
units or expose it to direct sunlight, mechanical
vibration, humidity or excessive dust.
• Never use liquid detergents, abrasives or
organic compounds (alcohol, gasoline, etc) to
clean the unit body.
• All repairs and technical service should
be carried out by qualified service center
personnel.
All images provided herein are schematic
drawings and may differ from real world
objects.
Warning
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Before you start
4
Before you start
4
Supported formats
Disc types Symbol Contents
DVD Compressed digital audio - video
MPEG4 (DivX) Compressed digital audio - video
Video-CD (VCD) Compressed digital audio - video
Super-VCD (SVCD) Compressed digital audio - video
CDDA Digital audio
MP3 Compressed digital audio
Kodak Picture CD Compressed digital static image
JPEG Compressed digital static image

Operation
5
Operation
5
Video/audio system connection
Before you connect any external
devices, make that power of the unit is
switched off.
Following outputs are available in this unit.
Composite video
Use the yellow plug of an AV cable to
connect the composite video output of this unit
to the video input of a TV/display.
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/display
SCART input.
5.1 audio
Use 3 pairs of audio cables to connect the
5.1 CH audio outputs of this unit to the 5.1
channel inputs of external audio amplifiers or
other players.
Stereo audio
Use a pair of AV cables (red for right/white
for left) to connect the stereo audio outputs of
this unit to the TV or a stereo input of power
amplifier.
Coaxial digital audio
Use a special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
a power amplifier.
Optical
Use the special optical cable to connect the
optical audio output of this unit to the optical
input of a power amplifier.
Component video
Use a 3-core AV cable to connect the
component outputs of this unit to the
corresponding inputs of a TV/display.
S-video
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video input
of a TV/display.
• The type of connection depends on
the TV/computer display input terminals. Do
not make all the connections at the same time;
otherwise the produced picture will be affected.
• Settings parameters should be adjusted
according to the type of connection of the
external device.

Operation
6
Operation
6
Control elements
Front panel
1 2 3 4 5 6 7
1. Disc slot
2. Display
3. USB port
4. OPEN/CLOSE button
5. PLAY/PAUSE button
6. MIC out jack
7. STANDBY button
Rear panel
1 2 3
4 5 6 7 8 9
1. Power cord
2. Stereo R/L audio output
3. Component video output
4. Digital coaxial output
5. Composite video output
6. S-Video output
7. Optical output
8. 5.1CH audio output
9. SCART connector

Operation
7
Operation
7
Remote controller (RC)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
1. (OPEN/CLOSE) button
2. OSD button
3. Number buttons
4. SUBTITLE button
5. TITLE button
6. MENU button
7. Cursor ( / / / ) buttons
8. / (REWIND/FORWARD) buttons
9. VOL- button
10. REMAIN button
11. (STOP) button
12. DVD/USB button
13. RESUME button
14. L/R button
15. N/P button
16. PROG button
17. VIDEO button
18. POWER button
19. TIME button
20. ANGLE button
21. LANGUAGE button
22. SETUP button
23. ENTER button
24. / (PREVIOUS/NEXT) buttons
25. (PLAY/PAUSE) button
26. VOL- button
27. ZOOM button
28. (MUTE) button
29. RETURN button 32. SLOW button
30. PBC button 33. A-B button
31. REPEAT button 34. COPY button
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert the batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• Use two AAA/1.5V batteries for the RC.
The RC should be pointed at remote sensor
within 8 meters and within 30 degrees at the
left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
1 2 3

Operation
8
Operation
8
Button functions
(OPEN/CLOSE)
Press the (OPEN/CLOSE) button when
power is on, the disc tray is ejected. Put the
disc on the tray with the title faced up. Press
the (OPEN/CLOSE) button again to close
the disc tray and wait for the disc to start
playing automatically.
POWER
When playing, press the POWER button to
turn off the unit and activate the standy mode;
Press the button again to turn on the unit and
resume playback.
TITLE
When playing a DVD disc, press the TITLE
button to go to the title menu of the disc.
SUBTITLE
When playing a DVD with multi-language
subtitles, press the SUBTITLE button
continually to circle through the subtitle
languages.
ANGLE
When playing a disc with the multi-angle
feature, press the ANGLE button to select a
view angle.
MENU
• When playing a DVD disc, press the
MENU button once to return to the main menu
of the diss.
• When playing a SVCD or VCD2.0, after the
disc is loaded, the unit will display the chapter
menu (if PBC is on). Also, you can display this
menu by pressing the MENU button.
(PLAY/PAUSE)
When playing a disc, press the (PLAY/
PAUSE) button once to pause; press the
(PLAY/PAUSE) button again to return to normal
playback.
Cursor buttons
Press cursor buttons to navigate in various
menus.
Number buttons
Press number buttons to input digits and
numbers (e.g. track/chapter number, playback
time etc.).
ENTER
Press the ENTER button to confirm chosen
options.
(STOP)
When playing DVD, SVCD, VCD, CD discs,
press STOP once, the unit will memorize the
previous ending point. Press (PLAY/PAUSE)
to resume the playback. Press (STOP)
for the second time to stop the playback
completely.
This function is only active when the Last
Memory option in General setup page is set to
ON.
(FORWARD)
Press this button for quick forward search.
Search speed will increase with each pressing:
2X => 4X => 8X => 16X => 32X => normal.
(REWIND)
Press this button for quick rewind search.
Search speed will increase with each pressing:
2X => 4X => 8X => 16X => 32X => normal.
/ (PREVIOUS/NEXT)
• When playing a DVD disc, press
(PREVIOUS) to go to the previous chapter.
• When playing SVCD, VCD, CD discs,
press (PREVIOUS) to go to the previous
track.
• When playing a DVD disc, press
(NEXT) to go to the next chapter.
• When playing SVCD, VCD, CD discs,
press (NEXT) to go to the next track.
PROG
• If a disc contains 2 or more tracks,

Operation
9
Operation
9
chapters or titles, set up the playing order to
your preference. Press PROG to enter the
programming menu.
• Press number buttons to input the number
of the track, title or chapter. If programmed
tracks are over ten, select and press
ENTER to go on programming. Maximum 20
programmable items are possible. Use cursor
buttons to move the cursor to START item.
Press ENTER to start program playback. Press
the PROG button to cancel programming.
This function is not available for MP3
dicsc.
SLOW
Press the SLOW button repeatedly to slow
playback speed as follows: X2 => X4 => X8 =>
X16 => normal.
SETUP
Press SETUP to enter or exit the system
setup menu.
N/P
Press the N/P button to select between PAL/
Multi/NTSC video modes. This function is
available when no disc is being played.
REPEAT
Press the REPEAT button to repeat a title,
chapter, track or the whole disc.
• When playing a DVD disc, press REPEAT
continually to repeat chapter =>title => all =>
repeat off.
• When playing SVCD, VCD, CD discs,
press the REPEAT button continually to repeat
track => all=> repeat off.
• When playing an MP3 disc, press REPEAT
continually to play folder => single => repeat
track => repeat folder.
A - B
• Press the A-B button at the start point (A)
and at the ending point (B) to select the repeat
fragment.
• Press A-B for the third time to cancel the
fragment repeat and return to normal playback.
DVD/USB
Press this button to access the media menu
in which you can select Disc or USB playback
with cursor buttons.
Operations with files stored on a USB
drive are the same as for discs.
LANGUAGE
When playing a DVD with more than one
audio stream, press the LANGUAGE button to
select the needed language.
PBC
Press this button to turn on or off the
Playback Control (PBC) function (for VCD
discs supporting PBC function).
RESUME
Press this button to go back to the current
playback after activating the disc title menu
with the TITLE button.
ZOOM
When playing DVD, SVCD, VCD disc, press
ZOOM button to zoom in the picture as follows:
2x => 3x => 4x => normal. In zoom in mode,
press cursor buttons to move the picture for
viewing.
L/R ( )
When playing Super-VCD, VCD, CD discs
with multi-channel audio, press the L/R button
to select left channel/right channel/stereo/mix
audio output.
REMAIN
Press this button to display various info
on the current playback: title/chapter, time
elapsed, etc.
VIDEO
Press VIDEO to select the video output
mode.

Operation
10
Operation
10
VOL+/-
Press VOL+ to adjust volume up. Press
VOL- to adjust volume down.
MUTE
Press the MUTE button to turn the sound off.
Press MUTE again to bring the sound back.
OSD
Press the OSD button to display the elapsed
playback time of title/chapter/track.
TIME
Press the TIME button to input chapter/
title number or disc time. Playback will start in
accordance with the input data.
COPY
• When playing an MP3 disc with a USB
drive connected, press this button to access
the Copy menu.
• When playing a CD disc with a USB drive
connected, press this button to enter the
Ripping menu.
RETURN
Press this button to return to the disc menu
while playing. Press again to resume playback.
System setup
1. Press the SETUP button to enter the
setup menu. In setup mode, press SETUP
again to quit the setup menu.
2. Use the / cursor buttons to choose a
setup page: General setup page, Audio setup
page, Dolby Digital setup, Video setup page,
Preference page.
3. Press the cursor button to enter the
setup page selected.
4. Use the / cursor buttons to select the
option you want to adjust.
5. Press the cursor button to enter the
adjustment list. Use the / cursor buttons
to select the adjustment and press ENTER to
confirm and return to options list.
6. To return to setup page list press the
cursor button in the options list.
The items in gray cannot be adjusted.
The setup is memorized and kept after power
is off.
General setup
General
General setup page
TV display
Angle mark
OSD lang
Captions
Screen saver
Last memory
Audio Dolby Video Preference
• TV DISPLAY
Normal/PS: When the device is connected
to a regular TV set, the wide-screen image is
shown on the screen but some part is cut off.
Normal/LB: When the device is connected
to a regular TV set, the wide-screen image is
shown and black bars appear at the top and
the bottom of the screen.
Wide: Use this option when the device is
connected to a wide-screen TV set.
• ANGLE MARK
If switched on, it will show the angle mark
when playing DVD discs with a multi-angle
view feature.
• OSD LANGUAGE
Select on-screen display language.
• CAPTIONS
This function doesn’t work if the disc has
no captions. If the caption is OFF, press
SUBTITLE button on the RC to switch captions
on. The default setup is ON.
• SCREEN SAVER
If Screen saver is set to ON and the device
is switched on without a disc playing for several
minutes, a moving picture will appear on the
screen, and the device will go to standby mode
after 20 minutes. Press the POWER button on

Operation
11
Operation
11
Spdif off: no digital signal out (optical or
coaxial output off), only analog audio output.
SPDIF/RAW: no decoding on the amplifier
digital signal input.
SPDIF/PCM: the amplifier must be supported
by PCM decoding or Dolby digital decoding
function.
• MICROPHONE
You can switch the microphone on or off,
adjust the microphone volume and echo.
• EQUALIZER
Several EQ modes are available. You can
select one according to your preference and
the disc content.
• REVERB MODE
You can select the appropriate reverberation
mode: off, Concert, Living room, Hall,
Bathroom, Cave, Arena, Church.
Dolby Digital setup
General
Dolby Digital Setup
Dual mono
Dynamic
Audio Dolby Video Preference
• DUAL MONO
Stereo: stereo output signal,
L-Mono: left output signal,
R-Mono: right output signal,
Mix-Mono: left and right output average
signal.
• DYNAMIC
When watching high dynamic range films or
programs at night, by selecting this mode you
can reduce the volume to a very low level while
keeping the quality and fine details of sound.
In this case, you won’t disturb your family and
keep the high quality sound.
the RC to wake it up.
• LAST MEMORY
When this function is on, the unit can
memorize the time elapsed from the last time
you played the disc. Then, next time, it will
resume playback from the memorized point.
Audio setup
General
Audio setup page
Speaker setup
Spdif setup
MIC
Equalizer
Reverb mode
Audio Dolby Video Preference
Speaker setup
General
Speaker setup page
Downmix
Front speaker
Center speaker
Rear speaker
Subwoofer
Audio Dolby Video Preference
• Downmix
LT/RT: The audio out is set to Left and Right
channels format even if the original sound is in
the 5.1CH format.
Stereo: The audio out format is stereo even
if the original sound is 5.1CH format.
5.1CH: The audio out format is 5.1 channel.
• Front, Center, Rear speaker,
Subwoofer: setup the configuration of
speakers (center and rear speakers available
only if 5.1-channel format is selected).
• SPDIF SETUP: Spdif output

Operation
12
Operation
12
Video setup
General
Video setup page
Component
Sharpness
Brightness
Contrast
Audio Dolby Video Preference
• COMPONENT: S-Video, YCbCr, Rgb,
YPbPr
• SHARPNESS, BRIGHTNESS,
CONTRAST: You can set sharpness,
brightness and contrast according to your
preference.
Preference setup (available when
playback is fully stopped)
General
Preference page
TV Type
Audio
Subtitle
Disc menu
Parental
Password
Default
Audio Dolby Video Preference
• TV TYPE
This device is compatible with all kinds of TV
systems. You can select between PAL, NTSC
or Auto.
Auto: the TV system is selected
automatically according to the disc system.
NTSC: the system used in USA, Taiwan,
Japan, etc.
PAL: the system used in China, Europe,
Hong Kong, etc.
• AUDIO, SUBTITLE, DISC MENU
LANGUAGE SETUP
These parameters can be preset according
to your preference. If your settings are
supported by the disc, the content will be
played according to them. Otherwise default
settings will apply.
• PARENTAL
This setting is for parents to control their
children from viewing inappropriate content
such as violence and erotic. The disc with the
control level higher than the set one will not be
played.
• PASSWORD
This setting allows you to change the
password. The initial factory password is 0000.
You can set your own password. If you forget
your own password, you can use 0000 as the
master password.
• DEFAULT
Reset to the initial factory settings.
Pictures of OSD menu are for reference
only and may differ from the real-world OSD.
Other functions
Ripping
This unit has the Ripping function making it
handy to quickly copy audio files (i.e. music)
from CDs. RIPPING is converting from the
CDDA format to the compressed MP3 format
onto a USB drive. While copying files, ID3 tags
are automatically generated in Russian and
English, depending on the source. If the disc
does not contain such information in CD-text
format, ID3 tags will be labeled as “Unknown
artist” and “Unknown album”.
The RIPPING function has a simple and
intuitive menu. To display the Ripping menu,
press COPY on the RC while a CD is being
played. A USB-drive should be inserted in the
device.

Operation
13
Operation
13
Create ID3 Yes
For navigation in the menu use cursor
buttons and press ENTER to confirm your
choice. In the “Options” column you may set
speed and bitrate for ripping. In “Track” you
may select tracks for ripping (press ENTER to
select a highlighted track). Besides, you can
select all tracks (“Select all”) or cancel your
choice (“Select none”). To start converting,
select “Start” and press ENTER.
MP3/JPEG/compressed video
playback
MP3 - generally adopted standard of audio
compression, compressing audio data to 1/12
of their size. One CD disc may store more than
600 minutes of music (170 songs). And the
quality of MP3 approximates to the audio CD
quality.
JPEG (Joint Photographic Expert Group) -
image compression algorithm used all over the
world and providing high level of compression
of the source data. Any graphics editor may
edit images of this format and their size in 15-
20 times less than the original.
Manufacturer guarantees regular
playback of licensed discs only. Some DivX
discs cannot be played due to their parameters
and recording conditions. AVI video files
exceeding 2 GB in size may be played
incorrectly.
When a disc or a USB containing files of
supported formats is inserted, the following
menu interface will appear:
1 2 3
1. Playback info window - shows current
playback time, track number, volume level,
playback status (stop/play/pause), etc.
2. Address window - shows directory address
at which the currently played file is found.
3. Directory window - shows the currently
selected directory.
Use cursor buttons to select the directory
you want and press ENTER to enter it. Select a
file and press ENTER to start its playback.
While playing JPEG files press STOP to
go back to the menu.
Press cursor buttons to rotate the picture in
different directions.
Regardless of the picture size and format, a
picture may possibly not be shown stretched in
full screen, leaving black stripes.
How to create a playlist
In the above menu, press PROG to enter the
File list mode. In this mode all files (including
all files in all directories) will be displayed in

Operation
14
Operation
14
this window. Select the files you want to
put on the playlist by pressing ANGLE. After
selecting all files for the playlist, press PROG
to enter the playlist. Press ENTER to start
playing the files in the playlist.
Copying data
Play a data disc containing MP3/JPG/DivX
files and insert a USB drive.
Press theCOPY button on RC, the COPY
menu will appear with options of ALL SELECT/
ALL UNSEL/COPY/EXIT.
Move the cursor to the target file or folder,
press ENTER to tick it, or select ALL SELECT
item to select all the data.
Move the cursor to COPY, then press
ENTER. Press ENTER again to display the
BACK/NEXT option.
Choose NEXT to start copying data to the
selected device.
Deleting data from USB
Start playback from a USB drive or a
memory card containing the desired data.
Press COPY to get the menu of ALL SELECT/
ALL UNSEL/COPY/DEL/EXIT. Move the cursor
to the target file or folder, press ENTER to
tick it, then move to DEL and press ENTER to
delete the data from the device.
USB background
• Supported USB file systems: FAT, FAT32.
USB 2.0 is supported; maximum supported
storage capacity is 32 GB. For correct and
satisfactory operation, use licensed USB drives
of well-known brands. Playback of some file
formats cannot be supported.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.

Operation
15
Operation
15
Handling digital discs
• Do not insert anything other than digital
discs into the disc tray.
• Do not use cracked, chipped, warped, or
otherwise damaged discs as they may cause
damage to the player.
• Handle the disc only by the edges (as
shown in the picture). To keep discs clean do
not touch its surface.
• Store discs in their cases when not in use.
• Do not expose discs to direct sunlight, high
humidity, high temperature or dust.
• Prolonged exposure to extreme
temperature can warp a disc.
• Do not attach labels, write on or apply
chemicals to the surface of discs.
• Do not touch the recorded surface of
discs.
• Use 12-cm discs. Use only conventional,
fully circular discs. Do not use irregularly
shaped discs.
Cleaning discs
Fingerprints should be carefully wiped from
the surface of a disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and macroscopic dirt,
so gently wiping them with a soft cloth should
remove dust particles. Wipe in a straight
motion from the center to the edge.
Never use solvents, gasoline, record cleaner
or antistatic spray on a digital disc. Such
chemicals can damage its plastic surface.

General Information
16
General Information
16
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No sound Poor audio cable connection Make proper connection
Disc is dirty or damaged Clean the disc
MUTE function is on Disable the MUTE function
No image Poor video cable connection Make proper connection
Incorrect setting of your TV set Correct the settings of your TV set
Disc cannot be
read
Disc is not inserted Insert the disc
Disc is inserted incorrectly Insert the disc with the label side facing up
Condensate on the unit laser
head
Switch the unit on without a disc for an
hour
Remote control
does not
operate
Remote control is incorrectly
directed at the unit
Use the remote controller according to the
manual
Distance and angle to the unit
are too large
Decrease the distance and angle
Batteries are exhausted Replace both batteries
Some functions
do not work
Disc is recorded incorrectly Wait 5-10 seconds and the unit will
automatically return to normal playback
Incorrect key sequence Repeat the operation one more time
Static voltage on the unit
housing
Switch the unit off for 1-2 minutes and then
switch it on again
Unstable image Incorrect TV settings Correct the TV settings
Accessories
1. DVD player 1 pc
2. Remote controller 1 pc
3. Audio-video cable 1 pc
4. Battery AAA 1.5V 2 pcs
5. Consumer information 1 pc
6. Warranty card 1 pc
7. Instruction manual 1 pc

General Information
17
General Information
17
Specifications
Appearance
Dimensions (L x W x H) 210 mm x 260 mm x 38 mm
Net/Gross weight 1.64 kg/1.96 kg
Compatibility
Supports DVD/DVD±R/DVD±RW/CD/CD-R/CD-RW/USB
Formats of playback DVD-video/Super VCD/VCD/HDCD/CDDA/MP3/Kodak
Picture/JPEG/MPEG4 (DivX/XviD)
Support of multiple audio tracks
for MPEG4 (DivX/XviD) +
Support of subtitle for MPEG4 +
Audio
Built-in Dolby Digital/
Dolby Prologic II decoder +
DTS digital out (coaxial) +
Video
Support NTSC/PAL +
Connectors
Composite +
SCART +
Coaxial +
S-Video +
Component (YUV) +
Optical +
5.1CH +
Stereo +
Functions
Screen saver +
Zoom +
Children lock +
Karaoke function +
Multi-shooting angle +
Audio CD ripping in MP3 format
to USB flash drive +
Copy function from discs
to USB flash drive +
Russian and English OSD +
Additional
Power supply ~110-240 V, 50/60 Hz
Power consumption in “STANDBY” less than 2 W
Nominal power consumption 20 W
Specifications are subject to change without notice. Dimensions are approximate.

Содержание
18
Содержание
18
Уважаемый покупатель!
Благодарим Вас за покупку нашего изделия. Чтобы понять, как правильно и безо-
пасно пользоваться приобретенным устройством, рекомендуется тщательно изучить
настоящее руководство перед подключением и эксплуатацией изделия. Сохраняйте
руководство для использования в будущем.
26
26
26
26
26
26
26
26
26
26
26
26
27
27
28
28
28
29
29
30
31
31
31
31
32
32
32
32
33
34
Содержание
Перед началом эксплуатации
Утилизация изделия
Меры предосторожности
Поддерживаемые форматы
Подключение
Подключение
Управление устройством
Элементы управления
Передняя панель
Задняя панель
Пульт дистанционного управления
Установка батареек
Функции кнопок
Open/close
Power
Title
Subtitle
Angle
Menu
Play/pause
Кнопки курсора
Кнопки с цифрами
Enter
Stop
FWD
REV
PREV/NEXT
Prog
Slow
Setup
N/P
Repeat
A-B
DVD/USB
L/R
Video
18
19
19
19
20
21
21
22
22
22
22
23
23
24
24
24
24
24
24
24
24
24
24
24
24
24
24
24
25
25
25
25
25
25
25
25
26
Remain
Language
PBC
Resume
Zoom
Volume+/Volume-
Mute
OSD
Time
Return
Copy
Настройка системы
Страница общих установок
Установки звука
Установки Dolby Digital
Страница установок видео
Установка предпочтений
Прочие операции
Функция ripping
Воспроизведение файлов MP3/JPEG/
сжатых форматов видео
Создание списка воспроизведения
Копирование файлов
Удаление данных с USB
Примечания по USB-разъему
Общая информация
Обращение с компакт-дисками
Чистка дисков
Комплект поставки
Руководство по устранению
неисправностей
Технические характеристики

Перед началом работы
19
Перед началом работы
19
Если вы желаете утилизировать данное изделие, не выбрасывайте его вместе с
обычным бытовым мусором. Существует отдельная система сбора использованных
электронных изделий в соответствии с законодательством, которая предполагает
соответствующее обращение, возврат и переработку.
Обращайтесь в органы местного управления за инструкциями по правильной
утилизации продукта. Тем самым Вы обеспечите утилизацию Вашего изделия
с соблюдением обязательных процедур по обработке, утилизации и вторичной
переработке и, таким образом, предотвратите потенциальное негативное воздействие
на окружающую среду и здоровье людей.
Утилизация изделия
Меры предосторожности
Предупреждение о наличии
высокого напряжения внутри
устройства.
Напоминание о проведении
всех действий в соответствии
с инструкциями.
Во избежание риска поражения
электрическим током или пожара
не открывайте корпус изделия.
Обращайтесь к квалифицированному пер-
соналу.
Изделие принадлежит к лазерной
продукции 1 класса.
• Для предотвращения риска возгорания
или удара током избегайте попадания в
устройство воды и эксплуатации устройства
в условиях высокой влажности.
• Устройство содержит компоненты под
высоким напряжением и лазерную систему,
поэтому не пытайтесь самостоятельно от-
крывать и ремонтировать устройство. Лазер-
ный луч опасен при снятой крышке корпуса.
• При перемещении устройства из холод-
ного места в теплое и наоборот на лазер-
ной головке может образоваться конденсат
и устройство не будет работать должным
образом. В этом случае перед началом вос-
произведения включите устройство на 1-2
часа без диска для прогрева до комнатной
температуры.
• Не пытайтесь открывать или закрывать
лоток для загрузки дисков вручную.
• Отключайте питание устройства только
при отсутствии диска.
• Выключайте устройство из розетки,
если Вы не собираетесь использовать его в
течение долгого времени.
• Перед включением устройства убе-
дитесь, что оно подключено правильно,
установите на минимум уровень громкости
усилителя и динамиков Вашей аудиосисте-
мы. Регулируйте уровень громкости только
после начала воспроизведения, чтобы из-
бежать повреждения аудиосистемы.
• Подключайте устройство только к сети
с параметрами, соответствующими напря-
жению питания аппарата.
• Устанавливайте устройство горизон-
тально; обеспечивайте хорошую вентиля-
цию, не закрывайте отверстия, предназна-
ченные для отвода тепла.
• Не ставьте посторонние предметы на
корпус устройства; это может стать причи
Warning
RISK OF ELECTRIC SHOCK
DO NOT OPEN

Управление устройством
20
Управление устройством
20
ной некорректной работы устройства.
• Устройство должно находиться в сухом
и проветриваемом месте. Исключайте на-
хождение устройства вблизи нагреватель-
ных приборов, не подвергайте воздействию
солнечного света, механической вибрации,
влажности и пыли.
• Не используйте для чистки корпуса
устройства жидкие чистящие средства,
абразивные материалы или органические
соединения (алкоголь, бензин и др.).
• Не допускайте нахождения источников
воды или сосудов с водой рядом с устрой-
ством. Не ставьте вазы, кружки и т.п. на
корпус устройства.
• Для ремонта и технического обслужи-
вания устройства обращайтесь в сервисные
центры.
Все иллюстрации, приведенные в на-
стоящем руководстве, являются схе-
матическими изображениями, которые
могут отличаться от реальных объектов.
Поддерживаемые форматы
Тип дисков Символ Содержимое
DVD Сжатое цифровое аудио - видео
MPEG4 (DivX) Сжатое цифровое аудио - видео
Video-CD (VCD) Сжатое цифровое аудио - видео
Super-VCD (SVCD) Сжатое цифровое аудио - видео
CDDA Цифровое аудио
MP3 Сжатое цифровое аудио
Kodak Picture CD Сжатое цифровое статическое изображение
JPEG Сжатое цифровое статическое изображение