
V1.2, July 2020
Operation - Basics
Connect the FS V2 USB Headset to your PC/Laptop USB port. The driver will be
installed auto atically.
Check the operation by aking a call on the softphone via FS V2 USB Headset. Press
the ic ute button, the LED will glow in red and verify whether the caller cannot hear
your voice. To release ic ute, press the ic ute button again.
You can adjust the caller’s voice to your co fort level by using ‘+’ button that increases
the receive volu e level and ‘–’ button that decreases the receive volu e level.
Warranty details
1. Telekonnectors (TLK) warrant this product to be free fro defects in aterial and
work anship appearing within 1 year fro the date of original purchase (invoice) of
the product. We will service and return the product or replace it as per our policy.
2. Physical da ages, internal or external due to i proper usage and ishandling are
not covered under this warranty. Headsets without serial nu ber will not be
covered under warranty.
3. This li ited warranty, is in lieu or all other warranties, express or i plied, including
this i plied warranties of erchantability and fitness for a particular purpose.
4. In no event shall TLK be responsible for any other da ages, whatsoever including
direct, indirect, special, incidental, consequential or otherwise of breach of this or
any other warranty, expressed or i plied.