V1.0,July 2020
Instructions
1. Extend the headband before placing the headset on your head. After placing it, adjust
the headband for comfortable fit.
2. Position the earpieces directly on the ears.
3. Position the microphone two fingers away from the corner of lip for best
transmission of your voice.
Operation - Basics
1. Your FS V2 headset can be used with the host phone/mobile phone directly. Please
check with your IT team for any clarifications.
2. Connect the 3.5 mm stereo pin of your headset to the available stereo pin jack on the
host.
3. Ensure that the headset (3.5 mm stereo pin) and the corresponding host are
connected properly.
4. Please check with your sales contact at TLK office or dealer for confirmation on
compatibility or further suggestions.
Warranty details
1. Telekonnectors (TLK) warrant this product to be free from defects in material and
workmanship appearing within 1 year from the date of original purchase (invoice) of
the product. We will service and return the product or replace it as per our policy.
2. Physical damages, internal or external due to improper usage and mishandling are not
covered under this warranty. Headsets without serial number will not be covered
under warranty.
3. This limited warranty, is in lieu or all other warranties, express or implied, including
this implied warranties of merchantability and fitness for a particular purpose.
4. In no event shall TLK be responsible for any other damages, whatsoever including
direct, indirect, special, incidental, consequential or otherwise of breach of this or any
other warranty, expressed or implied.