Telestream PRISM MPI2-RACK-MD Manual
Copyright © 2020 Telestream, LLC and its Affiliates. All rights reserved. Telestream products are covered by U.S. and foreign patents, issued
and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges
reserved. TELESTREAM is a registered trademark of Telestream, LLC. All other trade names referenced are the service marks, trademarks, or
registered trademarks of their respective companies.
Telestream products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously
published material. Specifications and price change privileges reserved.
TELESTREAM is a registered trademark of Telestream, LLC.
Contacting Telestream
Telestream, LLC
848 Gold Flat Road
Nevada City, CA 95959
USA
For product information, sales, service, and technical support:
Worldwide, visit www.telestream.net/telestream-support/video/support.htm to find contacts in your area.
Warranty
Telestream on behalf of itself and its Affiliates (“Telestream”) warrants that this product will be free from defects in materials and
workmanship for a period of one (1) year from the date of shipment. If any such product proves defective during this warranty period,
Telestream, at its option, either will repair the defective product without charge for parts and labor, or will provide a replacement in
exchange for the defective product. Parts, modules and replacement products used by Telestream for warranty work may be new or
reconditioned to like new performance. All replaced parts, modules and products become the property of Telestream.
In order to obtain service under this warranty, Customer must notify Telestream of the defect before the expiration of the warranty period
and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the defective
product to the service center designated by Telestream, with shipping charges prepaid. Telestream shall pay for the return of the product
to Customer if the shipment is to a location within the country in which the Telestream service center is located. Customer shall be
responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and care.
Telestream shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel other
than Telestream representatives to install, repair or service the product; b) to repair damage resulting from improper use or connection to
incompatible equipment; c) to repair any damage or malfunction caused by the use of non- Telestream supplies; or d) to service a product
that has been modified or integrated with other products when the effect of such modification or integration increases the time or difficulty
of servicing the product.
THIS WARRANTY IS GIVEN BY TELESTREAM WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED. TELESTREAM AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TELESTREAM’S RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS
THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TELESTREAM AND
ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TELESTREAM OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
[W2 – 15AUG04]
TELESTREAM SOFTWARE LICENSE AGREEMENT
THE PROGRAM, OR PROGRAMS, ENCODED OR INCORPORATED WITHIN EQUIPMENT OR ACCOMPANYING THIS AGREEMENT,
IS FURNISHED SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. RETENTION OF THE PROGRAM FOR MORE
THAN THIRTY DAYS OR USE OF THE PROGRAM IN ANY MANNER WILL BE CONSIDERED ACCEPTANCE OF THE AGREEMENT
TERMS. IF THESE TERMS ARE NOT ACCEPTABLE, THE UNUSED PROGRAM AND ANY ACCOMPANYING DOCUMENTATION
SHOULD BE RETURNED PROMPTLY TO TELESTREAM FOR A FULL REFUND OF THE LICENSE FEE PAID. (FOR INFORMATION
REGARDING THE RETURN OF PROGRAMS ENCODED OR INCORPORATED WITHIN EQUIPMENT, CONTACT THE NEAREST
TELESTREAM SALES OFFICE.)
DEFINITIONS.
"Telestream" means Telestream, LLC, a Delaware limited liability company, and its Affiliates , or the local Telestream legal entity that is
supplying the equipment.
"Program" means the Telestream software product (executable program and/or data) enclosed with this Agreement or included within the
equipment with which this Agreement is packed.
"Customer" means the person or organization in whose name the Program was ordered.
LICENSE.
Customer may:
1. Use the Program on a single machine at any one time; and
2. Copy the Program for archival or backup purposes, provided that no more than one (1) such copy is permitted to exist at any one time.
Each copy of the Program made by Customer must include a reproduction of any copyright notice or restrictive rights legend appearing in or
on the copy of the Program as received from Telestream.
Customer may not:
1. Use the Program on more than one machine at any one time;
2. Transfer the Program to any person or organization outside of Customer or the corporation of which Customer is a part without the prior
written consent of Telestream, except in connection with the transfer of the equipment within which the programs are encoded or
incorporated;
3. Export or re-export, directly or indirectly, the program, any associated documentation, or the direct product thereof, to any country to
which such export or re-export is restricted by law or regulation of the United States or any foreign government having jurisdiction without
the prior authorization, if required, of the Office of Export Administration, Department of Commerce, Washington, D.C. and the
corresponding agency of such foreign government;
4. Modify the Program, create derivative works, or merge the Program with another program;
5. Reverse compile or disassemble the Program for any purpose, beyond the extent that such activity is expressly permitted by applicable
open source licenses or applicable law notwithstanding this limitation; or
6. Copy the documentation accompanying the Program.
For Programs designed to reside on a single-machine and support one or more additional machines, either locally or remotely, without
permitting the Program to be transferred to an additional machine for local execution, the additional machines shall be considered within the
definition of "single machine." For programs permitting the Program to be transferred to an additional machine for local execution, a
separate license shall be required for each such machine with which the Program may be used.
Title to the Program and all copies thereof, but not the media on which the Program or copies may reside, shall be and remain with
Telestream or others for whom Telestream has obtained a respective licensing right.
Customer shall pay when due all property taxes that may now or hereafter be imposed, levied or assessed with respect to the possession or
use of the Program or this license and shall file all reports required in connection with such taxes.
If the Program or any related documentation is acquired by or for an agency of the U.S. Government, the Program and documentation shall
be considered “commercial computer software” or “commercial computer software documentation” respectively, as those terms are used in
48 CFR §12.212, 48 CFR §227.7202, or 48 CFR §252.227-7014, and are licensed with only those rights as are granted to all other
licensees as set forth in this Agreement.
THE PROGRAM MAY NOT BE USED, COPIED, MODIFIED, MERGED, OR TRANSFERRED TO ANOTHER EXCEPT AS EXPRESSLY
PERMITTED BY THESE TERMS AND CONDITIONS. UPON TRANSFER OF ANY COPY, MODIFICATION, OR MERGED PORTION OF
THE PROGRAM, THE LICENSE GRANTED HEREIN IS AUTOMATICALLY TERMINATED WITH RESPECT TO THE PARTY THAT
TRANSFERS THE PROGRAM.
TERM.
The license granted herein is effective upon acceptance by Customer, and shall remain in effect until terminated as provided herein. The
license may be terminated by Customer at any time upon written notice to Telestream. The license may be terminated by Telestream or any
third party from whom Telestream may have obtained a respective licensing right if Customer fails to comply with any term or condition and
such failure is not remedied within thirty (30) days after notice hereof from Telestream or such third party. Upon termination by either party,
Customer shall return to Telestream or destroy, the Program and all associated documentation, together with all copies in any form.
LIMITED WARRANTY.
The Program is provided "as is" without warranty of any kind, either express or implied. Telestream does not warrant that the functions
contained in the Program will meet Customer's requirements or that the operation of the Program will be uninterrupted or error-free.
TELESTREAM AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
LIMITATION OF LIABILITY, IN NO EVENT SHALL TELESTREAM OR OTHERS FROM WHOM TELESTREAM HAS OBTAINED A
LICENSING RIGHT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR
CONNECTED WITH CUSTOMER'S POSSESSION OR USE OF THE PROGRAM, EVEN IF TELESTREAM OR SUCH OTHERS HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
THIRD-PARTY DISCLAIMER.
Except as expressly agreed otherwise, third parties from whom Telestream may have obtained a licensing right do not warrant the program,
do not assume any liability with respect to its use, and do not undertake to furnish any support or information relating thereto.
GENERAL.
This Agreement contains the entire agreement between the parties with respect to the use, reproduction, and transfer of the Program.
Neither this Agreement nor the license granted herein is assignable or transferable by Customer without the prior written consent of
Telestream.
This Agreement and the license granted herein shall be governed by the laws of the state of California.
All questions regarding this Agreement or the license granted herein should be directed to the nearest Telestream Sales Office.
PRISM MPI2-RACK-MD Installation and Safety Instructions
i
Table of Contents
Important compliance and safety information ....................................................................................................................................iii
Preface ..............................................................................................................................................................................................xi
Installation.......................................................................................................................................................................................... 1
Initial product inspection ............................................................................................................................................................ 1
Accessories................................................................................................................................................................................ 2
Operating requirements ............................................................................................................................................................. 3
Rear panel connectors............................................................................................................................................................... 5
Equipment rack installation........................................................................................................................................................ 6
Power-on and power-off procedures........................................................................................................................................ 11
Operation ......................................................................................................................................................................................... 13
Extending the PRISM waveform monitor display..................................................................................................................... 13
ii
PRISM MPI2-RACK-MD Installation and Safety Instructions
Important compliance and safety information
United States of America Compliance Notices
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
commercial installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. Operation of
this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Safety
UL 61010-1: 2012 R4.16: Safety Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use - Part 1: General Requirements.
Environmental
Perchlorate Materials: this product contains one or more type CR lithium batteries. According to the state
of California, CR lithium batteries are classified as perchlorate materials and require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate for additional information.
Canada Compliance Notices
Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio-noise emissions from a digital apparatus
as set out in the Radio Interference Regulations of the Canadian Department of Communications. This
Class A digital apparatus complies with Canadian ICES-003.
Reglement sur le brouillage radioelectrique du Quadstere des Communications
Cet appareil numerique respecte les limites de bruits radioelectriques visant les appareils numeriques de
classe A prescrites dans le Reglement sur le brouillage radioelectrique du Quadstere des Communications
du Canada. Cet appareil numerique de la Classe A est conforme a la norme NMB-003 du Canada.
Safety
CAN/CSA-22.2 NO. 61010-1-12 + Gil + Gl2:: Safety Requirements for Electrical
Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements.
PRISM MPI2-RACK-MD Installation and Safety Instructions
iii
Sécurité
CAN / CSA-22.2 NO. 61010-1-12 + Gil + Gl2 :: Exigences de sécurité pour l'électricité
Matériel de mesure, de contrôle et d'utilisation en laboratoire - Partie 1: Généralités
Exigences.
European Union and European Free Trade Association (EFTA) Compliance
Notices
This equipment may be operated in the countries that comprise the member countries of the European
Union and the European Free Trade Association. These countries, listed in the following paragraph, are
referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND,
FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA, LUXEMBOURG,
MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN,
UNITED KINGDOM, !CELANO, LICHTENSTEIN, NORWAY, SWITZERLAND
Declaration of Conformity
Marking by the “CE” symbol indicates compliance with the Essential Requirements of the EMC Directive of
the European Union 2014/30/EU
This equipment meets the following conformance standards:
Safety
EN 61010-1: Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use
- Part 1: General Requirements
Low Voltage Directive 2014/35/EU
Emissions
EN 55032: 2012 + AC: 2013, CISPR 32: 2015, EN 61000-3-2: 2014,
EN 61000-3-3: 2013
Immunity
EN 55103-2: 2009, EN 61000-4-2: 2009,
EN 61000-4-3: 2006 + Al: 2008 + A2: 2010, EN 61000-4-4: 2004 + Al: 2010,
EN 61000-4-5: 2006, EN 61000-4-6: 2009, EN 61000-4-11: 2004
Environments: E2
Warnings
Warning! This is a Class A product. In a domestic environment, this product may cause radio interference,
in which case, the user may be required to take appropriate measures.
Achtung! Dieses ist ein Gerat der Funkstorgrenzwertklasse A. In Wohnbereichen konnen bei Betrieb
dieses Gerates Rundfunkstorungen auftreten, in welchen Fallen der Benutzer fur entsprechende
Gegenmal3nahmen verantwortlich ist.
Attention! Ceci est un produit de Classe A. Dans un environnement domestique, ce produit risque de creer
des interferences radioelectriques, ii appartiendra alors a l?utilisateur de prendre les mesures specifiques
appropriees.
Notes:
1. For Compliance with the EMC standards listed here, high quality shielded interface cables should be
used.
2. Emissions which exceed the levels required by this standard may occur when this equipment is
iv
PRISM MPI2-RACK-MD Installation and Safety Instructions
connected to a test object.
Environmental Compliance
This section provides information about the environmental impact of the product.
Product end-of-life handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling
Production of this equipment required the extraction and use of natural resources. The equipment may
contain substances that could be harmful to the environment or human health if improperly handled at the
product's end of life. To avoid release of such substances into the environment and to reduce the use of
natural resources, we encourage you to recycle this product in an appropriate system that will ensure that
most of the materials are reused or recycled appropriately.
This symbol on the product or its packaging indicates that this product complies with the applicable
European Union requirements according to Directives 2012/19/EU and 2006/66/EC on waste electrical and
electronic - equipment (WEEE) and batteries.
It also indicates that this product must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment. For more information about where you can
drop off your waste for recycling, please contact your local authority, or where you purchased your product.
Battery Recycling
This product may contain a rechargeable battery, which must be recycled or disposed of properly. Please
properly dispose of or recycle the battery according to local government regulations.
Transporting Batteries or products with Batteries in them
The capacity of the lithium ion secondary battery shipped with this product is under 100 Wh. The lithium
content of the installed primary battery is under 1 g. Each battery meets the applicable requirements of UN
Manual of Tests and Criteria Part Ill Section 38.3. Battery quantity is under the limit for shipment according
to Section II of the relevant Packing Instructions from the IATA Dangerous Goods Regulations. Consult
your air carrier for applicability and determination of any special lithium battery transportation requirements.
Restriction of Hazardous Substances
This product is classified as an industrial monitoring and control instrument, and is not required to comply
with the substance restrictions of the RoHS 3 Directives 2011 /65/EU and EU 2015/863 until July 22, 2021.
This product does, however, comply with the RoHS 2 Directive 2011/65/EU.
Korea Compliance Statement
PRISM MPI2-RACK-MD Installation and Safety Instructions
v
Taiwan Compliance Statement
Japan Compliance Statement
Important Safety Information
This manual contains information and warnings that must be followed by the user for safe operation and to
keep the product in a safe condition.
To safely perform service on this product, see the Service safety summary that follows the General safety
summary.
General Safety Summary
Use the product only as specified. Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. Carefully read all instructions. Retain these
instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally accepted safety
procedures in addition to the safety precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the cover for repair,
maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating correctly.
While using this product, you may need to access other parts of a larger system. Read the safety sections
of the other component manuals for warnings and cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the responsibility of the
assembler of the system.
vi
PRISM MPI2-RACK-MD Installation and Safety Instructions
To Avoid Fire or Personal Injury
Use proper power cord: Use only the power cord specified for this product and certified for the country of
use. Do not use the provided power cord for other products.
Ground the product: This product is grounded through the grounding conductor of the power cord. To avoid
electric shock, the grounding conductor must be connected to earth ground. Before making connections to
the input or output terminals of the product, ensure that the product is properly grounded. Do not disable
the power cord grounding connection.
Power disconnect: The power cord disconnects the product from the power source. See instructions for the
location. Do not position the equipment so that it is difficult to operate the power cord; it must remain
accessible to the user at all times to allow for quick disconnection if needed.
Observe all terminal ratings: To avoid fire or shock hazard, observe all rating and markings on the product.
Consult the product manual for further ratings information before making connections to the product. Do
not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of
that terminal.
Do not operate without covers: Do not operate this product with covers or panels removed, or with the case
open. Hazardous voltage exposure is possible.
Avoid exposed circuitry: Do not touch exposed connections and components when power is present.
Do not operate with suspected failures: If you suspect that there is damage to this product, have it
inspected by qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged or operates incorrectly. If in
doubt about safety of the product, turn it off and disconnect the power cord. Clearly mark the product to
prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace when
damaged. Do not use probes or test leads if they are damaged, if there is exposed metal, or if a wear
indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit is moved from a
cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the product.
Provide proper ventilation: Refer to the manual's installation instructions for details on installing the product
so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do
not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient for viewing the
display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional
to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
PRISM MPI2-RACK-MD Installation and Safety Instructions
vii
Service Safety Summary
The Service safety summary section contains additional information required to safely perform service on
the product. Only qualified personnel should perform service procedures. Read this Service safety
summary and the General safety summary before performing any service procedures.
To avoid electric shock: Do not touch exposed connections.
Do not service alone: Do not perform internal service or adjustments of this product unless another person
capable of rendering first aid and resuscitation is present.
Disconnect power: To avoid electric shock, switch off the product power and disconnect the power cord
from the mains power before removing any covers or panels, or opening the case for servicing.
Use care when servicing with power on: Dangerous voltages or currents may exist in this product.
Disconnect power, remove battery (if applicable), and disconnect test leads before removing protective
panels, soldering, or replacing components.
Verify safety after repair: Always recheck ground continuity and mains dielectric strength after performing a
repair.
Terms in the Manual
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in damage to this product
or other property.
Terms on the Product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the marking. WARNING indicates
an injury hazard not immediately accessible as you read the marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product
When this symbol is marked on the product, be sure to consult the manual to find out the nature of the
potential hazards and any actions which have to be taken to avoid them. (This symbol may also be used to
refer the user to ratings in the manual.)
The following symbol(s) may appear on the product:
General Safety Product Specific Statements
Use the product only as specified. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow
viii
PRISM MPI2-RACK-MD Installation and Safety Instructions
generally accepted safety procedures in addition to the safety precautions specified
in this manual. The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
WARNING. To prevent injury or death, power off the display and disconnect it from line voltage before
cleaning.
CAUTION. Avoid the use of chemical cleaning agents that might damage the plastics used in the items.
Use a 75% isopropyl alcohol solution as a cleaner and rinse with deionized water. Before using any other
type of cleaner, consult support: telestream.net/telestream-support/video/support.htm.
CAUTION. To reduce risk of fire and shock, use the certified power cord provided with the product.
CAUTION. Damage to the module can occur if this module is powered on at temperatures outside the
specified temperature range.
WARNING. To reduce the risk of fire and shock, ensure that the mains supply voltage fluctuations do not
exceed 10% of the operating voltage range.
WARNING. In the module, only the line conductor is fused for over-current protection. The fuse is internal
and not user replaceable. Do not attempt to replace the fuse. If you suspect the fuse has blown, return the
unit to an authorized service center for repair.
CAUTION. To prevent risk of fire, adequate airflow to instrument(s) and rack adapter must be
maintained. Failure to provide adequate airflow to instrument(s) could cause an instrument to shut
down.
Inadequate airflow includes placing instrument(s) and rack adapter in any small, enclosed
room that lacks a ventilation system, such as a closet. If the airflow is restricted or blocked
and the instrument(s) do not shut down, the risk of fire is increased and the instrument(s)
could be permanently damaged.
CAUTION. To minimize the risk of damage to the module, it is strongly recommended that the power
cord be connected to the module before the power cord is connected to the AC power source.
PRISM MPI2-RACK-MD Installation and Safety Instructions
ix
Preface
This manual describes how to install the PRISM MPI2-RACK-MD extended touch display with rack cabinet and provides
basic safety and operating information. Detailed operating information of the PRISM MPI2 product is available in the User
Manual. A complete list of PRISM documentation is provided in this manual. (See Documentation.)
Product description
The PRISM MPI2-RACK-MD provides a 3RU rack cabinet with an extended touch display for MPI2 applications that
require additional monitoring workspace. The touch display extends the functionality of the MPI2 product by providing an
additional full HD application tile. The additional tile supports several different monitoring applications, including picture,
trace, audio, and status. The PRISM MPI2-RACK-MD rack cabinet is 19 inches wide and comes with a USB/Headphone
connector on the rack ear.
Figure i: PRISM MPI2 (left; not included) mounted in the MPI2-RACK-MD
Documentation
Table i: Product documentation
Availability
Document
Manual type
Description
Print
Web
PRISM MPI2
Installation and
Safety Instructions
User
Describes how to install the PRISM
waveform monitor and provides basic
safety and operating information
√
√
PRISM MPI2
and MPX2 User
Manual
Primary User
Provides detailed operating
information for the PRISM waveform
monitor
√
PRISM MPI2-RACK-MD Installation and Safety Instructions
x
Searching for documents on www.telestream.net/video/resources.htm.
1.
Go to the Telestream website: telestream.net/video/resources.htm#Literature.
2.
Scroll to the “Literature” topic and click on the “Prism” category.
3.
Scroll down and find the Manual or document you need. Next to each title, you can part number, document type and release
date.
Conventions used in this manual
The following icons may be used throughout this manual.
Sequence Step Front panel
power
Connect power Network SVGA USB
PRISM MPI2-RACK-MD Installation and Safety Instructions
1
Installation
Initial product inspection
Perform the following product inspection procedure when you receive your extended touch display with rack cabinet:
1.
Inspect the two shipping cartons for external damage, which may indicate damage to the rack cabinet and extended
touch display.
2.
Verify that the one shipping carton contains the rack cabinet and the other shipping carton contains the extended touch
display, the standard accessories, and any optional accessories that you ordered. (See Accessories.)
3.
Remove the PRISM MPI2-RACK-MD from the shipping cartons, and then check that the extended touch display with rack
cabinet has not been damaged in transit. Prior to shipment the items are thoroughly inspected for mechanical defects.
The exterior should not have any scratches or impact marks.
NOTE. Save the shipping cartons and packaging materials for module repackaging in case shipment becomes necessary.
Exterior cleaning
The extended touch display with rack cabinet exteriors were inspected for debris when shipped. If necessary, you can clean
the exterior of the items as follows.
WARNING. To prevent injury or death, power off the display and disconnect it from line voltage before cleaning.
Clean the exterior surfaces of display with a dry lint-free cloth or a soft-bristle brush. If any dirt remains, use a cloth or swab
dipped in a 75% isopropyl alcohol solution. Use a swab to clean narrow spaces around controls and connectors. Do not use
abrasive compounds on any part of the extended touch display that may be damaged by it.
CAUTION. Avoid the use of chemical cleaning agents that might damage the plastics used in the items. Use a 75% isopropyl
alcohol solution as a cleaner and rinse with deionized water. Before using any other type of cleaner, consult support:
telestream.net/telestream-support/video/support.htm.
2
PRISM MPI2-RACK-MD Installation and Safety Instructions
Accessories
International power cords. Your module was shipped with one of the following power cord options. Power cords for
use in North America are UL listed and CSA certified. Cords for use in areas other than North America are approved by at
least one authority acceptable in the country to which the product is shipped.
Opt. A0 – North America power cord
Opt. A1 – Universal EUR power cord
Opt. A2 – United Kingdom power cord
Opt. A3 – Australia power cord
Opt. A4 – 240 V, North America power cord
Opt. A5 – Switzerland power cord
Opt. A6 – Japan power cord
Opt. A10 – China power cord
Opt. A11 – India power cord
Opt. A12 – Brazil power cord
Opt. A99 1 – No power cord
1 When ordering the A99 option, it is the responsibility of the end user to ensure that a certified power cord, for the country or
region it is installed, is used with this module.
CAUTION. To reduce risk of fire and shock, use the certified power cord provided with the product.
PRISM MPI2-RACK-MD Installation and Safety Instructions
3
Operating requirements
This section provides the environmental and power operating requirements for the module.
Environmental operating requirements
Check that the location of your installation has the proper operating environment as listed in the following table.
CAUTION. Damage to the module can occur if this module is powered on at temperatures outside the specified
temperature range.
Table 1: Environmental requirements
Parameter
Description
Temperature
Operating
0 °C to +40 °C
Non
Operating
–20 °C to +60 °C
Humidity
Operating
20% to 80% relative humidity (% RH) at up to +40 °C, non-condensing
Non
Operating
5% to 90% relative humidity (% RH) at up to 40 °C and derated linearly to 45% RH at
60 °C, non-condensing
Altitude
Operating
To 3,000 m (10,000 feet)
Maximum operating temperature decreases 1 °C each 300 m above 1.5 km
Non
Operating
To 12,000 m (40,000 feet)
Cooling
Internal fans provide forced air circulation. Do not block ventilation openings.
Bare
Instrument
To ensure proper airflow, there must be at least 2 inches of clearance on both sides of
the instrument, at least 2 inches of clearance from the rear of the instrument, and at
least a 1/2 inch of clearance from the top of the instrument.
4
PRISM MPI2-RACK-MD Installation and Safety Instructions
Electrical power requirements
The extended touch display operates from an AC power input. Check that your location provides the proper electrical power
requirements as listed in the following tables.
AC line power. Use the proper power cord with the module. (See International power cords.) The following table lists the
power requirements for the module.
Table 2: Extended touch display AC line power requirements
Parameter Description
Line voltage range 100 - 240 VAC
WARNING. To reduce the risk of fire and shock, ensure that the mains supply voltage
fluctuations do not exceed 10% of the operating voltage range.
Line frequency 50/60 Hz
Maximum power 0.75 A
WARNING. In the module, only the line conductor is fused for over-current protection. The fuse is internal and not user
replaceable. Do not attempt to replace the fuse. If you suspect the fuse has blown, return the unit to an authorized service center
for repair.
Physical characteristics
The following table lists the physical characteristics of a module.
Table 3: Extended touch display physical characteristics
Parameter Description
Dimensions
Height 13.72 cm (5.4 in.)
Width 21.84 cm (8.6 in.), includes bezel
Depth 11.18 cm (4.4 in.), includes bezel
Weight
Net 1.59 kg (3.5 lbs.)
Shipping 3.57 (7.87 lbs.)
Table of contents
Other Telestream Monitor manuals
