Telestream PRISM MPS User guide

PRISM MPS
SDI / IP Waveform Monitor
Rack Accessory Installation and
Safety Manual
January 2022 P00010448B

2
PRISM MPS Rack Accessory Installation Instructions
Copyrights and Trademark Notices
Copyright © 2022 Telestream, LLC and its Affiliates. All rights reserved. TELESTREAM is a
registered trademark of Telestream, LLC. All other trade names referenced are the
service marks, trademarks, or registered trademarks of their respective companies.
Telestream products are covered by U.S. and foreign patents, issued and pending.
Information in this publication supersedes that in all previously published material.
Specifications and price change privileges reserved.
TELESTREAM is a registered trademark of Telestream, LLC.
Blender: Images from Big Buck Bunny used without modification under the Creative
Commons Attribution 3.0 license. (c) copyright 2008, Blender Foundation / http://
peach.blender.org/about/.
Dolby: Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
Warranty
Telestream on behalf of itself and its Affiliates (“Telestream”) warrants that this product
will be free from defects in materials and workmanship for a period of one (1) year from
the date of shipment. If any such product proves defective during this warranty period,
Telestream, at its option, either will repair the defective product without charge for
parts and labor, or will provide a replacement in exchange for the defective product.
Parts, modules and replacement products used by Telestream for warranty work may
be new or reconditioned to like new performance. All replaced parts, modules and
products become the property of Telestream.
In order to obtain service under this warranty, Customer must notify Telestream of the
defect before the expiration of the warranty period and make suitable arrangements
for the performance of service. Customer shall be responsible for packaging and
shipping the defective product to the service center designated by Telestream, with
shipping charges prepaid. Telestream shall pay for the return of the product to
Customer if the shipment is to a location within the country in which the Telestream
service center is located. Customer shall be responsible for paying all shipping charges,
duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use
or improper or inadequate maintenance and care. Telestream shall not be obligated to
furnish service under this warranty a) to repair damage resulting from attempts by
personnel other than Telestream representatives to install, repair or service the
product; b) to repair damage resulting from improper use or connection to
incompatible equipment; c) to repair any damage or malfunction caused by the use of
non- Telestream supplies; or d) to service a product that has been modified or
integrated with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TELESTREAM WITH RESPECT TO THE PRODUCT IN LIEU OF
ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TELESTREAM AND ITS VENDORS

3
PRISM MPS Rack Accessory Installation Instructions
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. TELESTREAM’S RESPONSIBILITY TO REPAIR OR REPLACE
DEFECTIVE PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE
CUSTOMER FOR BREACH OF THIS WARRANTY. TELESTREAM AND ITS VENDORS WILL
NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES IRRESPECTIVE OF WHETHER TELESTREAM OR THE VENDOR HAS ADVANCE
NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
[W2 – 15AUG04]
TELESTREAM SOFTWARE LICENSE AGREEMENT
THE PROGRAM, OR PROGRAMS, ENCODED OR INCORPORATED WITHIN EQUIPMENT OR
ACCOMPANYING THIS AGREEMENT, IS FURNISHED SUBJECT TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT. RETENTION OF THE PROGRAM FOR MORE THAN
THIRTY DAYS OR USE OF THE PROGRAM IN ANY MANNER WILL BE CONSIDERED
ACCEPTANCE OF THE AGREEMENT TERMS. IF THESE TERMS ARE NOT ACCEPTABLE, THE
UNUSED PROGRAM AND ANY ACCOMPANYING DOCUMENTATION SHOULD BE
RETURNED PROMPTLY TO TELESTREAM FOR A FULL REFUND OF THE LICENSE FEE PAID.
(FOR INFORMATION REGARDING THE RETURN OF PROGRAMS ENCODED OR
INCORPORATED WITHIN EQUIPMENT, CONTACT THE NEAREST TELESTREAM SALES
OFFICE.)
DEFINITIONS
"Telestream" means Telestream, LLC, a Delaware limited liability company, and its
Affiliates, or the local Telestream legal entity that is supplying the equipment.
"Program" means the Telestream software product (executable program and/or data)
enclosed with this Agreement or included within the equipment with which this
Agreement is packed. "Customer" means the person or organization in whose name
the Program was ordered.
LICENSE
Customer may:
1. Use the Program on a single machine at any one time; and
2. Copy the Program for archival or backup purposes, provided that no more than
one (1) such copy is permitted to exist at any one time. Each copy of the Program
made by Customer must include a reproduction of any copyright notice or
restrictive rights legend appearing in or on the copy of the Program as received
from Telestream.
Customer may not:
1. Use the Program on more than one machine at any one time;
2. Transfer the Program to any person or organization outside of Customer or the
corporation of which Customer is a part without the prior written consent of
Telestream, except in connection with the transfer of the equipment within which
the programs are encoded or incorporated;

4
PRISM MPS Rack Accessory Installation Instructions
3. Export or re-export, directly or indirectly, the program, any associated
documentation, or the direct product thereof, to any country to which such export
or re-export is restricted by law or regulation of the United States or any foreign
government having jurisdiction without the prior authorization, if required, of the
Office of Export Administration, Department of Commerce, Washington, D.C. and
the corresponding agency of such foreign government;
4. Modify the Program, create derivative works, or merge the Program with another
program;
5. Reverse compile or disassemble the Program for any purpose, beyond the extent
that such activity is expressly permitted by applicable open source licenses or
applicable law notwithstanding this limitation; or
6. Copy the documentation accompanying the Program.
For Programs designed to reside on a single-machine and support one or more
additional machines, either locally or remotely, without permitting the Program to be
transferred to an additional machine for local execution, the additional machines shall
be considered within the definition of "single machine." For programs permitting the
Program to be transferred to an additional machine for local execution, a separate
license shall be required for each such machine with which the Program may be used.
Title to the Program and all copies thereof, but not the media on which the Program or
copies may reside, shall be and remain with Telestream or others for whom Telestream
has obtained a respective licensing right. Customer shall pay when due all property
taxes that may now or hereafter be imposed, levied or assessed with respect to the
possession or use of the Program or this license and shall file all reports required in
connection with such taxes. If the Program or any related documentation is acquired by
or for an agency of the U.S. Government, the Program and documentation shall be
considered “commercial computer software” or “commercial computer software
documentation” respectively, as those terms are used in 48 CFR §12.212, 48 CFR
§227.7202, or 48 CFR §252.227-7014, and are licensed with only those rights as are
granted to all other licensees as set forth in this Agreement.
THE PROGRAM MAY NOT BE USED, COPIED, MODIFIED, MERGED, OR TRANSFERRED TO
ANOTHER EXCEPT AS EXPRESSLY PERMITTED BY THESE TERMS AND CONDITIONS.
UPON TRANSFER OF ANY COPY, MODIFICATION, OR MERGED PORTION OF THE
PROGRAM, THE LICENSE GRANTED HEREIN IS AUTOMATICALLY TERMINATED WITH
RESPECT TO THE PARTY THAT TRANSFERS THE PROGRAM.
TERM
The license granted herein is effective upon acceptance by Customer, and shall remain
in effect until terminated as provided herein. The license may be terminated by
Customer at any time upon written notice to Telestream. The license may be
terminated by Telestream or any third party from whom Telestream may have obtained
a respective licensing right if Customer fails to comply with any term or condition and
such failure is not remedied within thirty (30) days after notice hereof from Telestream
or such third party. Upon termination by either party, Customer shall return to
Telestream or destroy, the Program and all associated documentation, together with all
copies in any form.

5
PRISM MPS Rack Accessory Installation Instructions
LIMITED WARRANTY
The Program is provided "as is" without warranty of any kind, either express or implied.
Telestream does not warrant that the functions contained in the Program will meet
Customer's requirements or that the operation of the Program will be uninterrupted or
error-free.
TELESTREAM AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LIMITATION OF LIABILITY,
IN NO EVENT SHALL TELESTREAM OR OTHERS FROM WHOM TELESTREAM HAS
OBTAINED A LICENSING RIGHT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF OR CONNECTED WITH CUSTOMER'S
POSSESSION OR USE OF THE PROGRAM, EVEN IF TELESTREAM OR SUCH OTHERS HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
THIRD-PARTY DISCLAIMER
Except as expressly agreed otherwise, third parties from whom Telestream may have
obtained a licensing right do not warrant the program, do not assume any liability with
respect to its use, and do not undertake to furnish any support or information relating
thereto.
GENERAL
This Agreement contains the entire agreement between the parties with respect to the
use, reproduction, and transfer of the Program. Neither this Agreement nor the license
granted herein is assignable or transferable by Customer without the prior written
consent of Telestream. This Agreement and the license granted herein shall be
governed by the laws of the state of California. All questions regarding this Agreement
or the license granted herein should be directed to the nearest Telestream Sales Office.

6
PRISM MPS Rack Accessory Installation Instructions
Table of Contents
Important Compliance and Safety Information 7
Preface 16
Product Description 16
Where to Find More Information 17
Conventions Used in This Manual 17
Telestream Contact Information 18
Assembly 19
Initial Product Inspection 19
Accessories 19
Prepare One MPS 20
Prepare Two MPS 24

Important Compliance and Safety Information 7
PRISM MPS Rack Accessory Installation Instructions
Important Compliance and
Safety Information
United States of America Compliance Notices
Class A Interference Statement
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
FCC Caution
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
Safety
UL 61010-1: 2012 R7.19: Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 1: General Requirements.
Environmental
Perchlorate Materials: this product contains one or more type CR lithium batteries.
According to the state of California, CR lithium batteries are classified as perchlorate
materials and require special handling.
See www.dtsc.ca.gov/hazardouswaste/perchlorate for additional information.

Important Compliance and Safety Information
8
PRISM MPS Rack Accessory Installation Instructions
Canada Compliance Notices
Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio-noise emissions from
a digital apparatus as set out in the Radio Interference Regulations of the Canadian
Department of Communications. This Class A digital apparatus complies with Canadian
ICES-003.
Reglement sur le brouillage radioelectrique du Quadstere des Communications
Cet appareil numerique respecte les limites de bruits radioelectriques visant les
appareils numeriques de classe A prescrites dans le Reglement sur le brouillage
radioelectrique du Quadstere des Communications du Canada. Cet appareil numerique
de la Classe A est conforme a la norme NMB-003 du Canada.
Safety
CAN/CSA-C22.2 NO. 61010-1-12 + GI1 + GI2 (R2017) + A1: Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General
Requirements.
Sécurité
CAN/CSA-C22.2 NO. 61010-1-12 + GI1 + GI2 (R2017) + A1: Exigences de sécurité pour
l'électricité Matériel de mesure, de contrôle et d'utilisation en laboratoire - Partie 1:
Généralités Exigences.
European Union and European Free Trade
Association (EFTA) Compliance Notices
This equipment may be operated in the countries that comprise the member countries
of the European Union and the European Free Trade Association. These countries, listed
in the following paragraph, are referred to as The European Community throughout
this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA,
FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, LITHUANIA,
LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA,
SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY,
SWITZERLAND
Declaration of Conformity
Marking by the “CE” symbol indicates compliance with the Essential Requirements of
the EMC Directive of the European Union 2014/30/EU
This equipment meets the following conformance standards:

Important Compliance and Safety Information 9
PRISM MPS Rack Accessory Installation Instructions
Safety
EN 61010-1: 2010 + A1: Safety Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use - Part 1: General Requirements Low Voltage Directive
2014/35/EU
Emissions
EN 55032: 2015 + A11: 2020, CISPR 32: 2015, EN 61000-3-2: 2014, EN 61000-3-3: 2013
Immunity
EN 55035: 2017, EN 61000-4-2: 2009,
EN 61000-4-3: 2006 + A1: 2008 + A2: 2010, EN 61000-4-4: 2012,
EN 61000-4-5: 2014 + A1: 2017, EN 61000-4-6: 2014, EN 61000-4-8: 2010,
EN 61000-4-11: 2020
Environments: E2
Warnings
Warning! This is a Class A product. In a domestic environment, this product may cause
radio interference, in which case, the user may be required to take appropriate
measures.
Achtung! Dieses ist ein Gerat der Funkstorgrenzwertklasse A. In Wohnbereichen
konnen bei Betrieb dieses Gerates Rundfunkstorungen auftreten, in welchen Fallen der
Benutzer fur entsprechende Gegenmal3nahmen verantwortlich ist.
Attention! Ceci est un produit de Classe A. Dans un environnement domestique, ce
produit risque de creer des interferences radioelectriques, ii appartiendra alors a
l?utilisateur de prendre les mesures specifiques appropriees.
Notes:
1. For Compliance with the EMC standards listed here, high quality shielded interface
cables should be used.
2. Emissions which exceed the levels required by this standard may occur when this
equipment is connected to a test object.
Environmental Compliance
This section provides information about the environmental impact of the product.
Product end-of-life handling
Observe the following guidelines when recycling an instrument or component:
Equipment recycling
Production of this equipment required the extraction and use of natural resources. The
equipment may contain substances that could be harmful to the environment or
human health if improperly handled at the product's end of life. To avoid release of
such substances into the environment and to reduce the use of natural resources, we

Important Compliance and Safety Information
10
PRISM MPS Rack Accessory Installation Instructions
encourage you to recycle this product in an appropriate system that will ensure that
most of the materials are reused or recycled appropriately.
This symbol on the product or its packaging indicates that this product complies with
the applicable European Union requirements according to Directives 2012/19/EU and
2006/66/EC on waste electrical and electronic - equipment (WEEE) and batteries.
It also indicates that this product must not be disposed of with your other household
waste. Instead, it is your responsibility to dispose of your waste equipment by handing
it over to a designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste equipment
at the time of disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment. For more information
about where you can drop off your waste for recycling, please contact your local
authority, or where you purchased your product.
Battery Recycling
This product may contain a rechargeable battery, which must be recycled or disposed
of properly. Please properly dispose of or recycle the battery according to local
government regulations.
Transporting Batteries or products with Batteries in them
The capacity of the lithium ion secondary battery shipped with this product is under
100 Wh. The lithium content of the installed primary battery is under 1 g. Each battery
meets the applicable requirements of UN Manual of Tests and Criteria Part Ill Section
38.3. Battery quantity is under the limit for shipment according to Section II of the
relevant Packing Instructions from the IATA Dangerous Goods Regulations. Consult
your air carrier for applicability and determination of any special lithium battery
transportation requirements.
Restriction of Hazardous Substances
This product is classified as an industrial monitoring and control instrument, and is not
required to comply with the substance restrictions of the RoHS 3 Directives 2011 /65/
EU and EU 2015/863 until July 22, 2021. This product does, however, comply with the
RoHS 2 Directive 2011/65/EU.
Korea Compliance Statement

Important Compliance and Safety Information 11
PRISM MPS Rack Accessory Installation Instructions
Taiwan Compliance Statement
Japan Compliance Statement
Important Safety Information
This manual contains information and warnings that must be followed by the user for
safe operation and to keep the product in a safe condition. To safely perform service on
this product, see the Service safety summary that follows the General safety summary.
General Safety Summary
Use the product only as specified. Review the following safety precautions to avoid
injury and prevent damage to this product or any products connected to it. Carefully
read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally
accepted safety procedures in addition to the safety precautions specified in this
manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the
cover for repair, maintenance, or adjustment. Before use, always check the product with
a known source to be sure it is operating correctly.

Important Compliance and Safety Information
12
PRISM MPS Rack Accessory Installation Instructions
While using this product, you may need to access other parts of a larger system. Read
the safety sections of the other component manuals for warnings and cautions related
to operating the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
To Avoid Fire or Personal Injury
Use proper power cord: Use only the power cord specified for this product and certified
for the country of use. Do not use the provided power cord for other products.
Ground the product: This product is grounded through the grounding conductor of the
power cord. To avoid electric shock, the grounding conductor must be connected to
earth ground. Before making connections to the input or output terminals of the
product, ensure that the product is properly grounded. Do not disable the power cord
grounding connection.
Power disconnect: The power cord disconnects the product from the power source. See
instructions for the location. Do not position the equipment so that it is difficult to
operate the power cord; it must remain accessible to the user at all times to allow for
quick disconnection if needed.
Observe all terminal ratings: To avoid fire or shock hazard, observe all rating and
markings on the product. Consult the product manual for further ratings information
before making connections to the product. Do not apply a potential to any terminal,
including the common terminal, that exceeds the maximum rating of that terminal.
Do not operate without covers: Do not operate this product with covers or panels
removed, or with the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry: Do not touch exposed connections and components when
power is present.
Do not operate with suspected failures: If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Disable the product if it is damaged. Do not use the product if it is damaged or operates
incorrectly. If in doubt about safety of the product, turn it off and disconnect the power
cord. Clearly mark the product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage
and replace when damaged. Do not use probes or test leads if they are damaged, if
there is exposed metal, or if a wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a
unit is moved from a cold to a warm environment.
Do not operate in an explosive atmosphere.

Important Compliance and Safety Information 13
PRISM MPS Rack Accessory Installation Instructions
Keep product surfaces clean and dry: Remove the input signals before you clean the
product.
Provide proper ventilation: Refer to the manual's installation instructions for details on
installing the product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or
otherwise obstructed. Do not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient
for viewing the display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an
ergonomics professional to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
Service Safety Summary
The Service safety summary section contains additional information required to safely
perform service on the product. Only qualified personnel should perform service
procedures. Read this Service safety summary and the General safety summary before
performing any service procedures.
To avoid electric shock: Do not touch exposed connections.
Do not service alone: Do not perform internal service or adjustments of this product
unless another person capable of rendering first aid and resuscitation is present.
Disconnect power: To avoid electric shock, switch off the product power and disconnect
the power cord from the mains power before removing any covers or panels, or
opening the case for servicing.
Use care when servicing with power on: Dangerous voltages or currents may exist in this
product. Disconnect power, remove battery (if applicable), and disconnect test leads
before removing protective panels, soldering, or replacing components.
Verify safety after repair: Always recheck ground continuity and mains dielectric
strength after performing a repair.
Terms in the Manual
These terms may appear in this manual:
WARNING: Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION: Caution statements identify conditions or practices that could result
in damage to this product or other property.
Terms on the Product
These terms may appear on the product:

Important Compliance and Safety Information
14
PRISM MPS Rack Accessory Installation Instructions
DANGER indicates an injury hazard immediately accessible as you read the marking.
WARNING indicates an injury hazard not immediately accessible as you read the
marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product
When this symbol is marked on the product, be sure to consult the manual to find out
the nature of the potential hazards and any actions which have to be taken to avoid
them. (This symbol may also be used to refer the user to ratings in the manual.)
The following symbol(s) may appear on the product:
General Safety Product Specific Statements
Use the product only as specified. Review the following safety precautions to avoid
injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally
accepted safety procedures in addition to the safety precautions specified in this
manual. The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the
cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating
correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
WARNING: To prevent injury or damage to the instrument, do not carry the
PRISM monitor by the handles on the front of the instrument. These handles are
for pulling the instrument out of a rack installation and are not intended to carry
the instrument.

Important Compliance and Safety Information 15
PRISM MPS Rack Accessory Installation Instructions
ADVERTENCIA: Para evitar lesión o daños al equipo, no sujete el monitor PRISM por las
asas del frente del equipo. Estas asas son para sacar el equipo de una instalación de
rack y no están diseñadas para sujetarlo.
WARNUNG: Um Verletzungen oder Schäden am Gerät zu vermeiden, sollten Sie den
PRISM Monitor nicht an den Griffen an der Vorderseite des Geräts tragen. Diese Griffe
dienen zum Herausziehen des Geräts aus einer Rack-Installation und sind nicht zum
Tragen des Geräts gedacht.
ATTENTION: Afin d’éviter tout dommage ou casse de matériel ne pas porter le PRISM
avec les anses de devant. Celle-ci servent à retirer le matériel du rack et ne servent pas
à le porter.
AVVERTIMENTO: Per evitare lesioni o danni allo strumento, non utilizzate le maniglie
frontali per trasportare l’apparato. Queste maniglie servono esclusivamente per
estrarre lo strumento dal rack e non sono idonee al trasporto dello strumento.
AVISO: Para evitar ferimentos ou danos ao instrumento, não transporte o monitor
PRISM pela pega na parte frontal do instrumento. Estas pegas são para puxar o
instrumento para fora de uma instalação em rack e não se destinam ao transporte do
instrumento.
CAUTION: Ambient air temperature near the equipment is not necessarily inlet
air temperature. Damage to the instrument can occur if this equipment is
powered on without sufficient access to cool air.
PRECAUCIÓN: La temperatura ambiente cercana al equipo no es necesariamente la
temperatura de entrada de aire. Hay peligro de daños al equipo si se opera sin el
suficiente acceso a aire fresco.
VORSICHT: Die Umgebungstemperatur in der Nähe des Geräts entspricht nicht
unbedingt der Ansauglufttemperatur. Das Gerät kann beschädigt werden, wenn es
ohne ausreichenden Zugang zu kühler Luft eingeschaltet wird.
AVERTIR: La température de l’air ambient n’est nécessairement celle à l’intérieure de
l’appareil. Pour assurer un bon fonctionnement de ce dernier, veuillez vous assurer
d’une bonne ventilation du matériel. Sans cela des dégâts pourraient apparaitre.
ATTENZIONE: La temperatura dell'aria ambiente vicino all'apparecchiatura non è
necessariamente la temperatura dell'aria in ingresso. Possono verificarsi danni allo
strumento se questa apparecchiatura viene accesa senza un accesso sufficiente all'aria
fredda.
CUIDADO: A temperatura do ar ambiente próximo ao equipamento não é
necessariamente a temperatura do ar de entrada. Podem ocorrer danos ao
instrumento se este equipamento for ligado sem acesso suficiente a ar frio.

Preface
Product Description
16
PRISM MPS Rack Accessory Installation Instructions
Preface
This section contains information related to the installation of the MPS rack accessories.
It also has a complete list of PRISM documentation (detailed operating information is
available in the user manual) and contact information for Telestream support.
Product Description
The PRISM MPS rack accessories (option MPS-RACK) provides field-installable options
to secure one MPS or two MPS in a rack. Screws to connect all the components are
included.
Included Equipment
•Short brackets to attach the MPS to the rack
•Long bracket to cover a space in a rack next to a single MPS and attach the MPS to
the other side of the rack
•Middle brackets to connect two MPS side-by-side

Preface
Where to Find More Information
17
PRISM MPS Rack Accessory Installation Instructions
•Handles to more easily remove the MPS from a rack
Where to Find More Information
The full User Manual, Release Notes, and other information about your product are
available for download at telestream.net/video/resources.htm. The Product Documen-
tation table lists all the relevant documentation for the PRISM SDI/IP Waveform Moni-
tor.
Conventions Used in This Manual
The PRISM SDI / IP Waveform Monitor is also referred to as the "PRISM" throughout this
manual.
Product Documentation
Document Manual type Part number Description
MPS-MPD User Manual Primary User D00013488x Provides detailed operating information.
Release Notes Release Notes D00010030x Describes the new features,
improvements, and limitations of the
instrument firmware.
MPS Installation and
Safety Instructions
User P00010445x Provides basic safety and operating
information (included with instrument)
for a PRISM MPS.
MPS Rack Accessory
Installation Manual
User P00010448x Describes how to connect rack
equipment to a PRISM MPS instrument
and install it in a rack. Provides basic
safety and operating information
(included with option MPS-RACK kit).
MPS Portable Accessory
Installation Manual
User P00010447x Describes how to connect portable
accessory equipment to a PRISM MPS
instrument. Provides basic safety and
operating information (included with
option MPS-PTBL kit).

Preface
Telestream Contact Information
18
PRISM MPS Rack Accessory Installation Instructions
Telestream Contact Information
To obtain product information, technical support, or provide comments on this guide,
contact us using our web site, email, or phone number as listed below.
Resource Contact Information
Telestream Video
Support
Web Site: http://www.telestream.net/telestream-support
Email:[email protected]
US and Canada Toll-free: 1-844-219-5329
Outside of US and Canada: 1-503-967-9833
Telestream Web Site: www.telestream.net
Sales and Marketing Email: [e-mail]
Telestream
848 Gold Flat Road, Suite 1
Nevada City, CA. USA 95959
International
Distributor Support
Web Site: www.telestream.net
See the Telestream Web site for your regional authorized
Telestream distributor.
Telestream Technical
Writers
Email: [e-mail]
If you have comments or suggestions about improving
this document, or other Telestream documents—or if
you've discovered an error or omission—please email us.

Assembly
Initial Product Inspection
19
PRISM MPS Rack Accessory Installation Instructions
Assembly
This section describes how to install the rack accessory equipment to the PRISM MPS
and install the MPS in a rack.
Initial Product Inspection
1. Inspect the shipping carton for external damage, which may indicate damage to
the instrument.
2. Remove the equipment from the shipping carton and check that the instrument
has not been damaged in transit. Prior to shipment the instrument is thoroughly
inspected for mechanical defects. The exterior should not have any scratches or
impact marks.
Note: Save the shipping carton and packaging materials for instrument repackaging
in case shipment becomes necessary.
3. Verify the shipping carton contains the accessories you ordered and all necessary
screws.
Accessories
PRISM MPS Rack Accessory Kit
Accessory
image Description Quantity Part number
MPS Rack Accessory Installation and
Safety Manual
1 P00010448x
Short rack-ear bracket 2 P00010134x
Middle bracket 2 P00010255x

Assembly
Prepare One MPS
20
PRISM MPS Rack Accessory Installation Instructions
Prepare One MPS
If only one MPS unit is going in a rack, this section explains how to connect the
hardware to the MPS.
Handle 3 P00010331x
Long rack-ear bracket 1 P00010135x
Filler panel
(shipped attached to the long rack-
ear bracket)
1 P00010332x
USB housing subassembly
(shipped attached to the long rack-
ear bracket)
1 P00010253x
Screw, truss-head, 10-32 X 0.625,
Phillips
Note: The example of the screw is
not to scale.
4 P00010226x
Screw, flat-head, M4 X 8, Phillips
Note: The example of the screw is
not to scale.
14 P00010225x
PRISM MPS Rack Accessory Kit
Accessory
image Description Quantity Part number