Teli CSDS60CM3 User manual

D4168926B
HD Color Camera
CSDS60CM3
Instruction Manual
Thank you for purchasing our product.
Before using this HD Color Camera, please read through this Instruction
Manual carefully in order to use this product correctly and safely.
After reading, keep this instruction manual near the equipment so that you
can refer to, whenever you need it.
TABLE OF CONTENTS
ATTENTION FOR SAFETY
1．INTRODUCTION··················································································1
2．FEATURES····························································································1
3．COMPONENT ·······················································································2
4．OPTIONAL PARTS···············································································2
5．EXPLANATION OF BACK··································································3
6．CONNECTION ······················································································5
7．FUNCTION····························································································6
8．BEFORE THINKING IT TO BE TROUBLE········································8
9．SPECIFICATION···················································································9
10．APPEARANCE····················································································14
Printed On Recycled Paper．

D4168926B
ATTENTION FOR SAFETY
・This instruction manual contains important information for the operator (user) and/or people in the vicinity
to avoid injuries or property damages.
・Prior to use, read this instruction manual after understanding the meaning of figure sign.
［
［［
［Explanation of Indications］
］］
］
Indication Explanation
WARNING
This mark indicates the user that improper use may cause death or serious
injuries(*1) of user or people in the vicinity.
CAUTION
This mark indicates the user that improper use may cause injuries(*2) or
material damages(*3) against the user or people in the vicinity.
*1：Serious injuries means wounds, loss of sight, burns, electric shocks, fractures, poisoning, and
others for which hospitalization or long term care are required.
*2：Injuries means wounds, burns, electric shocks, and others for which hospitalization or long term
care are not required.
*3：Material damage means any direct or consequential damage related to property or material loss.
［
［［
［Explanation of Sign］
］］
］
Indication Explanation
PROHIBITION
This mark is indicates what the user SHOULD NOT DO.
The details are given adjacent the mark.
INSTRUCTION
This mark is indicates what the user MUST DO.
The details are given adjacent the mark.

D4168926B
［
［［
［Handling Precaution］
］］
］
WARNING
Instruction
●Immediately cease use of the equipment in the event of abnormality or malfunction
If abnormal conditions are present, such as smoke, a burning smell, ingress of water or
foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may
result.
If such abnormalities occur, please pull a cable out of a connector and contact your sales
representative.
Do not attempt to repair it on your own, because it is dangerous.
Do not get wet
●Do not use the equipment in locations subject to water splashes
Otherwise, fire or electric shock may result.
Never pull apart
●Do not disassemble ,repair, or, modify the equipment
Otherwise, fire or electric shock may result.
Prohibition
●Do not place anything on the equipment
If metallic object, liquid, or other foreign matter enters the equipment, fire or electric shock
may result.
Prohibition
●Do not place the equipment in an unstable, inclined location, locations subject to
vibration or impact
Otherwise, the equipment may topple over and cause injury.
Do not touch
●During an electric storm, do not touch connected cables
Otherwise, an electric shock may result.
Instruction
●Use the specified power supply
Use of an unspecified power supply may result in fire or electric shock.
Prohibition
●Do not be handled roughly, damaged fabricated, bent forcefully, pulled, twisted,
bundled, placed under heavy object or heated connected cables
Otherwise, fire or electric shock may result.

D4168926B
［
［［
［Handling Precaution］
］］
］
CAUTION
Instruction
●Observe the following when installing the equipment
・Do not cover the equipment with a cloth, etc.
・Do not place the equipment in a narrow location where heat is likely to accumulate.
Otherwise, heat will accumulate inside the equipment, fire may result.
Prohibition
●Do not place the equipment in locations subject to high moisture, oil fumes, stream,
corrosive gas or dust
Otherwise, fire or electric shock may result.
Prohibition
●Do not install the equipment in locations exposed to direct sunlight or humidity
Otherwise, the internal temperature of the equipment will rise, fire may result.
Instruction
●Use only specified DC cable and connection cables
Otherwise, fire or electric shock may result.
Prohibition
●Do not expose the equipment to intense light(sunlight, etc) long time
It may cause the trouble.
Prohibition
●Do not short a output signal
It may cause the trouble.
Prohibition
●Do not give strong impact against the equipment
It may cause the trouble.
Prohibition
●Do not pull connected cables strongly
It may cause the disconnection.
Instruction
●Contact your sales representative to request periodic inspection and cleaning (once in
about 5 years)
Accumulation of dust inside the equipment may result in fire or electric shock.
For inspection and cleaning costs, contact your sales representative.

D4168926B
［
［［
［Guarantee］
］］
］
［
［［
［Service］
］］
］
The period of guarantee is 12 months after the product delivery.
If any trouble because of responsibility of our company occurred during the period, we repair it free of charge
according to [Service].
But in the case of following, guarantee becomes inapplicable.
・The trouble because of an error in use and unfair repair and remodeling.
・The trouble because of a fall after the purchase and transportation.
・The trouble because of fire, natural calamity(earthquake, storm and flood damage, thunderbolt), damage
from salty breeze, gas harm and abnormal voltage.
・Condition for repair
When the user requests us to repair product, please return it our factory and we repair it.
But user bear overheads(travel expenses, a cost of camera disassembly charge) and return cost.
・A period to accept repair
・Repair for free··· Refer to [Guarantee].
・Charged repair ·· 7 years after the production end.

D4168926B
CASES FOR INDEMNITY
●In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party,
deliberate or accidental misuse by the user, or use under extreme operating conditions.
●In the case of indirect, additional, consequential damages (loss of business interests, suspension of
business activities) are incurred as result of malfunction or non-function of the equipment, we shall be
exempted from responsibility for such damages.
●In the case damage or losses are caused by failure to observe the information contained in the
instructions in this instruction manual and specifications.
●In the case damage or losses are caused by use contrary to the instructions in this instruction manual and
specifications.
●In the case damage or losses are caused by malfunction or other problems resulting from use of
equipment or software that is not specified.
●In the case damage or losses are caused by repair or modification conducted by the customer or any
unauthorized third party (such as an unauthorized service representative).
●Expenses we bear on this product shall be limited to the individual price of the product.

D4168926B
RESTRICTION FOR USE
●Should the equipment be used in the following conditions or environments, give consideration to safety
measures and inform us of such usage:
1.：Use of the equipment in the conditions or environment contrary to those specified, or use
outdoors.
2.：Use of the equipment in applications expected to cause potential hazard to people or property,
which require special safety measures to be adopted.
●This product can be used under diverse operating conditions. Determination of applicability of equipment
or devices concerned shall be determined after analysis or testing as necessary by the designer of such
equipment or devices, or personnel related to the specifications. Such designer or personnel shall assure
the performance and safety of the equipment or devices.
●This product is not designed or manufactured to be used for control of equipment directly concerned with
human life (*1) or equipment relating to maintenance of public services/functions involving factors of
safety (*2). Therefore, the product shall not be used for such applications.
(*1): Equipment directly concerned with human life refers to:
· Medical equipment such as life-support systems, equipment for operating theaters.
· Exhaust control equipment for exhaust gases such as toxic fumes or smoke.
· Equipment mandatory to be installed by various laws and regulations such as the Fire Act or
Building Standard Law.
· Equipment related to the above
(*2): Equipment relating to maintenance of public services/functions involving factors of safety refers to:
· Traffic control systems for air transportation, railways, roads, or marine transportation.
· Equipment for nuclear power generation.
· Equipment related to the above.

D4168926B
Usage Precautions
●Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may
cause malfunctions. Further, do not damage connected cables, since this may cause wire breakage.
●Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In
particular, do not use the product in areas exposed to direct sunlight. Moreover, during shooting under
high temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or
camera conditions (such as increased gain). However, such phenomena are not malfunctions.
●Restriction for the lens combination
This camera might from a ghost to image area depending on the combination of a lens and an illumination
with this camera. But this is not a failure of this camera. Therefore, Please check the combination of the
lens and the illumination with this camera when you use.
●Combination check with the monitor
Depending on a used monitor and the combination of the DVI-D cable, there is the case that is not
displayed normally by a monitor. Please confirm the combination of a monitor and DVI-D cable and
this camera beforehand.
●Precaution in the power supply from camera control connector
There is the case that noise appears depending on a PC. Then please use the DC12V supply from a power
supply connector.
There is a possibility that the camera malfunction according to falling supply voltage depending on a Mini-
USB cable for camera control to use.
In that case, please use the DC12V supply from a power supply connector.
●Do not apply image pickup surface to the direct sun or intense light
The color filter of the sensor fades when I guess strong light right for a long time.
●Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a
malfunction.
●Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connected cables, noise
may be generated on the screen. If this occurs, move the camera or the cable.
●If the equipment is not to be used for a long duration
Turn off power to the camera for safety and attach the lens cap to the camera to protect the image pickup
surface.

D4168926B
“This symbol is applicable for EU member states only”
●Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with
diluted neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such
chemicals may damage or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or, scratched, consult your sales
representative.
●Disposal
When disposing of the camera, it may be necessary to disassemble it into separate parts, in accordance
with the laws and regulations of your country and/or municipality concerning environmental
contamination.
This equipment is a class A digital device examined according to Part 15 of the FCC rule.
These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communication.

D4168926B
环保使用期限标识，是根据电子信息产品污染控制管理办法以及，电
子信息产品污染控制标识要求(SJ/T11364-2006)、电子信息产品环保
使用期限通则，制定的适用于中国境内销售的电子信息产品的标识。
电子信息产品只要按照安全及使用说明内容，正常使用情况下，从生
产月期算起，在此期限内，产品中含有的有毒有害物质不致发生外泄
或突变，不致对环境造成严重污染或对其人身、财产造成严重损害。
产品正常使用后，要废弃在环保使用年限内或者刚到年限的产品时，
请根据国家标准采取适当的方法进行处置。
另外，此期限不同于质量/功能的保证期限。
The Mark and Information are applicable for People's Republic of
China only.
＜产品中有毒有害物质或元素的名称及含量＞
有毒有害物
有毒有害物有毒有害物
有毒有害物质
质质
质或元素
或元素或元素
或元素
部件名称
部件名称部件名称
部件名称 铅
铅铅
铅（
（（
（Pb
PbPb
Pb）
））
） 汞
汞汞
汞（
（（
（Hg
HgHg
Hg）
））
） 镉
镉镉
镉（
（（
（Cd
CdCd
Cd）
））
） 六价
六价六价
六价铬
铬铬
铬
（
（（
（Cr(VI)
Cr(VI)Cr(VI)
Cr(VI)）
））
）
多
多多
多溴联
溴联溴联
溴联苯
苯苯
苯
（
（（
（PBB
PBBPBB
PBB）
））
）
多
多多
多溴
溴溴
溴二苯
二苯二苯
二苯醚
醚醚
醚
(
((
(PBDE
PBDEPBDE
PBDE）
））
）
相机本体
相机本体相机本体
相机本体 × ○ ○ ○ ○ ○
○
○○
○：
：：
：表示
表示表示
表示该
该该
该有毒有害物
有毒有害物有毒有害物
有毒有害物质
质质
质在
在在
在该
该该
该部件所有均
部件所有均部件所有均
部件所有均质
质质
质材料中的含量均在电子信息产品中有毒有害物质
材料中的含量均在电子信息产品中有毒有害物质材料中的含量均在电子信息产品中有毒有害物质
材料中的含量均在电子信息产品中有毒有害物质
的限量要求
的限量要求的限量要求
的限量要求标
标标
标准
准准
准规
规规
规定的限量要求
定的限量要求定的限量要求
定的限量要求(SJ/T11363
(SJ/T11363(SJ/T11363
(SJ/T11363-
--
-2006)
2006)2006)
2006)以下
以下以下
以下
×
××
×：
：：
：表示
表示表示
表示该
该该
该有毒有害物
有毒有害物有毒有害物
有毒有害物质
质质
质至少在
至少在至少在
至少在该
该该
该部件的某一均
部件的某一均部件的某一均
部件的某一均质
质质
质材料中的含量超出电子信息产品中有毒有
材料中的含量超出电子信息产品中有毒有材料中的含量超出电子信息产品中有毒有
材料中的含量超出电子信息产品中有毒有
害物质的限量要求
害物质的限量要求害物质的限量要求
害物质的限量要求标
标标
标准
准准
准规
规规
规定的限量要求
定的限量要求定的限量要求
定的限量要求(SJ/T11363
(SJ/T11363(SJ/T11363
(SJ/T11363-
--
-2006)
2006)2006)
2006)
This information is applicable for People's Republic of China only.
This information is applicable for People's Republic of China only.This information is applicable for People's Republic of China only.
This information is applicable for People's Republic of China only.
リサイクル
リサイクルリサイクル
リサイクルに
にに
に関
関関
関する
するする
する情報
情報情報
情報（
（（
（包装物
包装物包装物
包装物）
））
）
有关再利用的信息
有关再利用的信息有关再利用的信息
有关再利用的信息(
((
(包装物
包装物包装物
包装物)
))
)
Information on recycling of wrapping composition
Information on recycling of wrapping compositionInformation on recycling of wrapping composition
Information on recycling of wrapping composition
中华人民共和国
环保使用期限
10
段
段段
段ボール
ボールボール
ボール
瓦楞纸板
瓦楞纸板瓦楞纸板
瓦楞纸板
Corrugated
Corrugated Corrugated
Corrugated cardboard
cardboardcardboard
cardboard
CB
箱
箱箱
箱／
／／
／箱子
箱子箱子
箱子／
／／
／Bo
BoBo
Bo
内部緩衝材料
内部緩衝材料内部緩衝材料
内部緩衝材料
内部缓冲材料
内部缓冲材料内部缓冲材料
内部缓冲材料
Internal buffer
Internal buffer Internal buffer
Internal buffer
materials
materialsmaterials
materials
OTHERS

D4168926B
1
1．
．．
．INTRODUCTION
This HD color camera is a unit type camera utilized 1/3 inch sensor.
A picture output is DVI-D, so that you can get high-speed and high-resolution picture.
Because this camera can connect a monitor directly, it is suitable for use of observation.
2．
．．
．FEATURES
High-frame rate
This HD camera output a picture of the greatest SXGA size with 60 fps at the progressive.
Color reproduction characteristics
This camera is superior in color reproduction characteristics because the sensor is adopted a primary color
mosaic filter.
DVI-D
The picture output is possible just to be connected to the monitor directly because the picture output is
DVI-D.
Number of the output pixels can change
Number of the output pixels can change 1280(H)×1024(V)/60Hz or 1280(H)×720(V)/60Hz.
Camera control
It is possible to control this camera from camera control connector.
Small and light
This camera is small and light. So it is superior to incorporate machinery.
Electronic lines
It is possible to show a monitor screen electronic lines by two vertical and horizontal.
RoHS compliant

D4168926B
2
3．
．．
．COMPONENT
(1) Camera body ································································· × 1
(2) Accessories
・Intentional Manual(Japanese)····································· × 1
・Intentional Manual(English) ····································· × 1
※No application software attached to this camera.
※No DVI-D cable and Mini-USB cable for camera control attached to this camera.
4．
．．
．OPTIONAL PARTS
(1) Camera mounting kit···· CPT8420
※Please contact our business charge for detail of option unit.

D4168926B
3
5．
．．
．EXPLANATION OF BACK
Rear panel
① DVI-D connector
Picture output connector
・Connector model (Camera side) XM4M-2432-1312 (OMRON)
・Pin assignment
Pin No.
I/O Function
1 O TX2-
2 O TX2+
3 - TX2/4 Shield
4 - TX4-(N.C.)
5 - TX4+(N.C.)
6 O DDC Clock
7 O DDC Data
8 - N.C.
9 O TX1-
10 O TX1+
11 - TX1/3 Shield
12 - TX3-(N.C.)
13 - TX3+(N.C.)
14 - +5V
15 - GND
16 I Hot Plug Detect
17 O TX0-
18 O TX0+
19 - TX0/5 Shield
20 - TX5-(N.C.)
21 - TX5+(N.C.)
22 O TX Clock Shield
23 O TX Clock+
24 O TX Clock-
②
①
③
④
12 3 4 5 6 7 8
910
24
11 12 13 14 15 16
17 18 19 20 21 22 23

D4168926B
4
② Camera control connector
・Connector model (Camera side) UX60SC-MB-5ST(80) (HIROSE ELECTRIC)
・Pin assignment
Pin No.
I/O Function
1 - POWER
2 I/O USB D-
3 I/O USB D+
4 - N.C.
5 - USB_GND
③OPWB (One Push White Balance)switch
This is a switch for OPWB.
About the white balance, please confirm 7th clause.
④Power supply connector
This is a connector for +12V power supply.
・Connector model (Camera side) LGP3831-0200F (SMK)
・Conformity plug standard EIAJ RC-5320A voltage category 4
32 41
5

D4168926B
5
6．
．．
．CONNECTION
Please connect this camera like chart below.
(Please refer to our business charge for detail.)
(1) In the picture output
Monitor DVI-D cable
CSDS60CM3 Power adapter
HD
Progressive
(2) In the camera control
Monitor DVI-D cable
CSDS60CM3
Mini-USB cable
HD
Progressive
Power adapter
PC
A request about the connection
・When the shock that is strong in the connector part is used by an increasing system, please
bundle up a cable in a place near as possible to a camera body because a shock is not handed
down to a connector.
・DVI-D cable and Mini-USB cable for camera control are not attached to this product.

D4168926B
6
7．
．．
．FUNCTION
Each following functions are possible to control by PC from though the camera control connector.
(1) Output pixels
It is possible to change two kinds of output pixels. (Factory setting：1280(H)×720(V))
・1280(H)×1024(V) (Aspect ratio 5：4)
・1280(H)× 720(V) (Aspect ratio 16：9)
(2) Setup-level setting
It is possible to set the setup-level. A setting range is -16LSB～+16LSB. (Factory setting：8LSB)
(3) Gain setting
There are 2 modes of MANU(manual) mode and AUTO mode. (Factory setting：AUTO)
A setting range is 0～+24dB.
AUTO mode is always regulate gain depending on the brightness of an object. It is possible to setting max
gain of this time.
(4) White balance
There are 3 kinds of modes of MWB(Manual White Balance), OPWB(One Push White Balance),
AWB(Auto White Balance). It is possible to choose it to a subject, a use. (Factory setting：OPWB)
・MWB(Manual White Balance)
R-gain and B-gain can be set independently.
Setting range：0dB～12dB
・OPWB(One Push White Balance)
It is regulated by one push so that RGB of the center of image area become equal.
・AWB(Auto White Balance)
It is always reproduced kept images of the balance and pursuit the change of the source of light
automatically.
(5) Aperture
It is possible to set aperture correction revision of the output picture.
A setting range is 8 phases (0~7) each High frequency and Low frequency. (Factory setting：3)
・Phase up : Picture’s edge is emphasized.
(6) Gamma correction
It is possible to set gamma correction of the output picture with 17 phases(0~16). (Factory setting：5)
・Phase up : The shading of the shade become clear.

D4168926B
7
(7) Electronic shutter
There are 2 modes of MANU(manual) and AUTO. (Factory setting：AUTO)
・MANU mode
It is possible to select the shutter speed with 9 phases.
When you make the speed early, it is possible to take in a lot of light and easy to come to watch a
gloomy subject.
・AUTO mode
It is always regulated shutter speed to the brightness of the subject.
(8) Mirror mode
It is possible to turn over the output picture.
It is possible to change ON/OFF each Horizontal and Vertical.
(9) Electronic line
Because it is possible to show a monitor screen electronic lines by two vertical and horizontal, it is
convenience to align and measure the images.
You can move the line by one pixel of unit and set the following items.
・Line type
Fill / Translucent
・Line width
a pixel / 2 pixels
・Line color
changeable
・Setting range
1280(H)×1024(V) output Vertical ：0～1279
Horizontal ：0～1023
1280(H)× 720(V) output Vertical ：0～1279
Horizontal ：0～719
(10) Color matrix
It is possible to adjust the color masking manually. The adjustment method is changing possibility in RGB
and YUV. (Factory setting：RGB)
・RGB
The variable parameter is R-G, R-B, G-B, G-R, B-R and B-G.
・YUV
The variable parameter is hue, and saturation(u/v).

D4168926B
8
8．
．．
．BEFORE THINKING IT TO BE TROUBLE
When a trouble occurred during use, please check the following points.
If the trouble did not still dissolve, Please refer to store of the purchase or our business charge.
Symptom Check matter
A camera does not start ・Please confirm the connection of the DC cable.
・Please confirm whether the LED there is on the back of camera on.
A picture is not displayed ・Please confirm the connection of the DVI-D cable.
・Please confirm the connection of the DC cable.
・Please confirm whether the diaphragm of the lens close.
The control of the camera is not
possible from a PC
・Please confirm the connection of the Mini-USB cable for camera
control.

D4168926B
9
9．
．．
．SPECIFICATION
［
［［
［Electronic Specification］
］］
］
(1) Image sensor 1/3 type CMOS sensor
・Total pixels 1384(H)×1076(V)
・Valid pixels 1329(H)×1049(V)
・Valid number of output pixels 1280(H)×1024(V) or 1280(H)×720(V)
(Factory setting：1280(H)×720(V))
・Pixel size 3.63µm(H)×3.63µm(V)
・Scanning area 1/3 type
(2) Scanning system Progressive
(3) Synchronization system Internal synchronization
(4) Aspect ratio 5：4 or 16：9
(5) Video output Color 8 bit each RGB
(6) Standard sensitivity 2000lx, F4, 5000K
(7) Minimum sensitivity 6 lx (F1.4, gain : +24dB, gamma : 16, video level : 50%)
(8) Gain MANU/AUTO change (Fatory setting：AUTO)
・MANU(Manual gain control) 0～+24dB (Fatory setting：0dB)
・AUTO(Auto gain control)
Detection area Full screen
Corrective range 0～+24dB (It is possible to setting max gain. (Factly setting : 24dB))
(9) Set up -16LSB～+16LSB (Fatory setting：8LSB)
(10) White balance MWB/OPWB/AWB change (Fatory setting：OPWB)
・MWB (Manual white balance)
Corrective range 3000K～6500K
Setting method R-gain and B-gain can be set independently. (0～+12dB each R and B)
・OPWB (One push white balance)
Corrective range 3000K～6500K
Detection area Center of the screen
・AUTO (Auto whit balance)
Corrective range 3000K～6500K
Detection area Full screen
(11) Gamma 17 step Change (Fatory setting：5)
・0 Correction OFF (γ=1)
・1~16 Correction ON
(12) Aperture 8 Step change each High frequency and Low frequency.
(Fatory setting：3)
・0 Correction OFF
・1~7 Correction ON

D4168926B
10
(13) Mirror mode
・Horizontal turn ON/OFF change (Fatory setting：OFF)
・Vertical turn ON/OFF change (Fatory setting：OFF)
(14) Electronic line ON/OFF change (Fatory setting：OFF)
・Number Vertical, Horizontal each 2 lines
・Type Fill/Translucent change
・Width 1 pixel/2 pixels change
・Color Changeable
・Setting range
1280(H) × 1024(V) Vertical ：0～1279
Horizontal：0～1023
1280(H) × 720(V) Vertical ：0～1279
Horizontal：0～719
(15) Power source
・Dc connector supply DC 12V±10% (Ripple voltage 50mV
p-p
)
・Camera control connector supply DC 5V± 5% (Ripple voltage 50mV
p-p
)
※When both DC cable and Mini-USB cable for camera control were connected, +12V from DC cable is
given priority.
※A note
There is a possibility that the camera malfunction according to falling supply voltage depending on a
Mini-USB cable for camera control to use.
In that case, please use the DC12V supply from a power supply connector.
(16) Power consumption Approx. 2.0W