Telkom Telmor MOB-100 User manual

I
O
-
7538
-
226
-
0
4
GZT TELKOM
-
TELMOR Sp. z o. o.,
Mickiewicza 5/7, 80
-
425 Gdańsk
tel. [phone], e-mail: [e-mail], www.telmor.pl
HS
General principles of use
Prior to installation, adjustments and using the device, you should refer to the User Manual to facilitate
the correct configuration and avoid any damage.
TELKOM-TELMOR endeavours to provide you with a device that is fully operational. If, however, the
device becomes damaged in transport for any reason beyond the Manufacturer's control, you need to notify
the Manufacturer or their sales representative of this fact and agree on how to repair the defect.
The MOB-100 may be stored for 18 months from the date of manufacture without any deterioration of
its performance. Standard storage atmospheric conditions are in accordance with the environmental
specifications of IEC 68.1: temperature 15 ÷ 35°C, humidity 25 ÷ 70%, pressure 860 ÷ 1060hPa.
Characteristics
The MOB-100 is a modern optical micro receiver dedicated for use in FTTH (Fiber To The Home)
applications. A metal cast enclosure of the device enables its installation within a "mouse" type plastic casing.
At its input the receiver has an SC/APC connector while its RF output is fitted with a F-type connector. The
optical receiver is fitted with a three-state LED optical power indicator.
Use
The MOB-100 is dedicated for FTTH applications. It is installed at the end subscriber's location, further
past the point where the signal is distributed for downstreaming to several TV receivers. A built-in AGC enables
the output signal to remain at a constant level despite variations in input signal strength.
Connection method
Apply an optical signal ranging -10…-3 dBm to the SC/APC connector and connect a TV receiver to the RF
output. Next turn the power supply on.
A three-state LED indicator measures input signal strength:
- orange PIN<-10dBm,
- green -10dBm<PIN<-3dBm,
- red PIN>-3dBm.
Safe operation principles:
 To ensure appropriate ventilation, keep any items at least 5 cm away from the unit.
 Don't cover the unit with items such as newspapers, tablecloths, curtains, etc..
 Do not place any sources of open flame (such as burning candles) or strong heat near the unit.
 Do not put any containers with fluid on top of or near the unit.
MOB-100
Optical Receiver
User Manual

I
O
-
7538
-
226
-
0
4
GZT TELKOM
-
TELMOR Sp. z o. o.,
Mickiewicza 5/7, 80
-
425 Gdańsk
tel. [phone], e-mail: [e-mail], www.telmor.pl
Technical parameters
Products or packaging that are marked with such a logo may not be disposed of together with unsorted
household waste but should be delivered to a specialised WEEE collection point for recycling and waste
reuse.
The EU member states and other European countries have different systems in place for the collection,
reuse and recycling of WEEE. By keeping WEEE separate from other waste you prevent the potential
damage to the environment and health effects in humans. Recycling also saves natural resources. For more
information regarding the recycling and reuse of waste electronic materials contained in this product , please
contact your local town or municipality authorities or a local waste management facility
.
OPTICAL PATH MOB-100
Input power range (PIN) dBm -10…-3,0
Wavelength range nm 1280 – 1600
Maximum power dBm +3
Input signal strength indicator dBm
Three-colour LED:
- orange: PIN < -10
- green: -10 < PIN < -3
- red: PIN > -3
Input connector / SC / APC
RF path
Frequency range MHz 47-862
Gain flatness dB ± 1,0
AGC accuracy
within the -10…-3dBm range dB ±1
C/N for input power = -3dBm and OMI =3,5% dB 52
Maximum output level (42 CENELEC
channels) - CTB, CSO ≤ 60 dBc
dBµV 80
Output connector / “F” socket
Input impedance Ohm 75
OTHER
Supply voltage (external power supply) VDC / mA 9 / 150
Power consumption W < 1,0
Working temperature range C 0…+40