Telrad CPE8100 User guide

LTE Outdoor CPE8100/8101
January 2018
System
Manual

Page 2
Legal Rights
© Copyright 2015 Telrad Networks Ltd. All rights reserved.
The material contained herein is proprietary, privileged, and confidential and owned by Telrad
Networks or its third party licensors. No disclosure thereof shall be made to third parties without
the express written permission of Telrad Networks Ltd.
Telrad Networks Ltd. reserves the right to alter the equipment specifications and descriptions in
this publication without prior notice. No part of this publication shall be deemed to be part of any
contract or warranty unless specifically incorporated by reference into such contract or warranty.
Trade Names
BreezeCOM®, BreezeMAX®, 4Motion® and/or other products and Telrad Networks/or services
referenced herein are either registered trademarks, trademarks or service marks of Telrad
Networks Ltd.
All other names are or may be the trademarks of their respective owners.
Statement of Conditions
The information contained in this manual is subject to change without notice. Telrad Networks Ltd.
shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this manual or equipment supplied with it.
Warranties and Disclaimers
All Telrad Networks Ltd. (“Telrad Networks“) products purchased from Telrad Networks or through
any of Telrad Networks' authorized resellers are subject to the following warranty and product
liability terms and conditions.
Exclusive Warranty
(a) Telrad Networks warrants that the Product hardware it supplies and the tangible media on
which any software is installed, under normal use and conditions, will be free from significant
defects in materials and workmanship for a period of fourteen (14) months from the date of
shipment of a given Product to Purchaser (the "Warranty Period"). Telrad Networks will, at its
sole option and as Purchaser's sole remedy, repair or replace any defective Product in
accordance with Telrad Networks' standard R&R procedure.
(b) With respect to the Firmware, Telrad Networks warrants the correct functionality according to
the attached documentation, for a period of fourteen (14) month from invoice date (the "Warranty
Period")". During the Warranty Period, Telrad Networks may release to its Customers firmware
updates, which include additional performance improvements and/or bug fixes, upon availability
(the "Warranty"). Bug fixes, temporary patches and/or workarounds may be supplied as
Firmware updates.
Additional hardware, if required, to install or use Firmware updates must be purchased by the

Page 3
Customer. Telrad will be obligated to support solely the two (2) most recent Software major
releases.
TELRAD NETWORKS SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING
AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT
EXIST OR WAS CAUSED BY PURCHASER'S OR ANY THIRD PERSON'S MISUSE,
NEGLIGENCE, IMPROPER INSTALLATION OR IMPROPER TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED
USE, OR BY ACCIDENT, FIRE, LIGHTNING OR OTHER HAZARD.
Disclaimer
(a) The Software is sold on an "AS IS" basis. Telrad Networks, its affiliates or its licensors MAKE
NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO
THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION. TELRAD NETWORKS
SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO
THE SOFTWARE. UNITS OF PRODUCT (INCLUDING ALL THE SOFTWARE) DELIVERED TO
PURCHASER HEREUNDER ARE NOT FAULT-TOLERANT AND ARE NOT DESIGNED,
MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE
FAILURE, MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH
OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE ("HIGH-RISK
ACTIVITIES"). HIGH-RISK ACTIVITIES MAY INCLUDE, BUT ARE NOT LIMITED TO, USE AS
PART OF ON-LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING
FAIL-SAFE PERFORMANCE, SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES,
AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL, LIFE
SUPPORT MACHINES, WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING
A SIMILAR DEGREE OF POTENTIAL HAZARD. TELRAD NETWORKS SPECIFICALLY
DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH-RISK
ACTIVITIES.
(b) PURCHASER'S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE
SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE,
AT TELRAD NETWORKS'S OPTION. TO THE FULLEST EXTENT ALLOWED BY LAW, THE
WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN
FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING BUT NOT
LIMITED TO WARRANTIES, TERMS OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH
DESCRIPTION, NON-INFRINGEMENT, AND ACCURACY OF INFORMATION GENERATED,
ALL OF WHICH ARE EXPRESSLY DISCLAIMED. TELRAD NETWORKS' WARRANTIES

Page 4
HEREIN RUN ONLY TO PURCHASER, AND ARE NOT EXTENDED TO ANY THIRD PARTIES.
TELRAD NETWORKS NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO
ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF ITS PRODUCTS.
Limitation of Liability
(a) TELRAD NETWORKS SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD
PARTY, FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS OR
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES
OF ANY KIND, WHETHER ARISING UNDER BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), STRICT LIABILITY OR OTHERWISE AND WHETHER BASED ON THIS
AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
(b) TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE
LIABILITY FOR DAMAGES HEREUNDER OF TELRAD NETWORKS OR ITS EMPLOYEES OR
AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BY PURCHASER,
NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL PARTIES REGARDING
ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT BY THAT
PARTY (EXCEPT IN THE CASE OF A BREACH OF A PARTY'S CONFIDENTIALITY
OBLIGATIONS).

Page 5
PLEASE READ THESE SAFETY PRECAUTIONS!
RF Energy Health Hazard
The radio equipment described in this guide uses radio frequency transmitters. Although the power
level is low, the concentrated energy from a directional antenna may pose a health hazard.
Do not allow people to come in close proximity to the front of the antenna while the transmitter is operating.
Protection from Lightning
Before connecting this instrument to the power line, make sure that the voltage of the power
source matches the requirements of the instrument. The unit must be standards.
Disposal and Recycling Information
Pursuant to the WEEE EU Directive electronic and electrical waste must not be disposed of with
unsorted waste. Please contact your local recycling authority for disposal of this product.
Reduction of Hazardous Substances
This CPE is compliant with the EU Registration, Evaluation, Authorization and Restriction of
Chemicals (REACH) Regulation (Regulation No 1907/2006/EC of the European Parliamentand of the
Council) and the EU Restriction of Hazardous Substances (RoHS) Directive (Directive 2002/95/EC of the
European Parliament and of the Council).
CE Conformance Declaration
Marking by the above symbol indicates compliance with the Essential Requirements of the R&TTE Directive of
the European Union (1999/5/EC). This equipment can meet the following conformance standards:
• EN 60950/22 - Product Safety
• EN301489 EN301908 EN62311 - EMC requirements for radio equipment
This device is intended for use in all European Community countries.
FCC USA CBRS Band Category B device
The CPE8100 requires installation by a CPI (Certified Professional Installer) as defined in Section 96.39 and 96.45 of FCC
part 96 requirements. The Compact is Classified as a Category B CBSD which requires the following info be recorded and
uploaded as part of the CPI process per section 96.45

Page 6
The CPE8100 (Category B CBSD) must report to a SAS to register and obtain spectrum grants per FCC part 96. Local
administration should be executed through the domain proxy and all freq, bandwidth and power adjustments must be
handled in coordination with the SAS and grant process. The device is not authorized to transmit without a grant and
ships with TX disabled. It is the responsibility of the CPI to populate the CPI database and obtain a grant before the
Device is permitted to Transmit. Location will be recorded by the professional installer andreported to the CPI database
along with the other parameters listed in the above table
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 50cm between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada statement
This device complies with RSS-192 & RSS-197 of the Industry Canada Rules. Operation is subject to the
following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired
operation.
Ce dispositif est conforme à la norme CNR-192 & CNR-197 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas
produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement indésirable.
Users can obtain Canadian information on RF exposure and compliance from the Canadian
Representative:Nick Dewar Nick[email protected]m

Page 7
Table of Contents
1. OVERVIEW ............................................................................................................... 9
 CPE 8100\CPE 8101 – COMMON LTE FEATURES............................................................................. 9
 CPE 8100 PRODUCT HIGHLIGHTS ................................................................................................. 10
 CPE 8100 ELECTRICAL /PHYSICAL SPECIFICATIONS .................................................................. 10
 CPE8100 POE ADAPTER SPECIFICATION..................................................................................... 10
 CPE 8101 PRODUCT HIGHLIGHTS ................................................................................................. 11
 CPE 8101 ELECTRICAL /PHYSICAL SPECIFICATIONS .................................................................. 11
 CPE8101 POE ADAPTER SPECIFICATION..................................................................................... 11
2. GETTING STARTED – CPE8100................................................................................. 12
 DEVICE LOGIC CONNECTION ........................................................................................................... 12
 INSTALLING OUTDOOR UNIT (ODU) – POLE MOUNT .................................................................... 13
 INSTALLING OUTDOOR UNIT (ODU) – WALL MOUNT.................................................................... 14
 HEADER CONNECTION..................................................................................................................... 14
 GROUNDING ..................................................................................................................................... 14
 LED DISPLAY .......................................................................................................................................... 16
 RF SIGNAL ADJUSTMENT ................................................................................................................ 16
3. GETTING STARTED – CPE8101................................................................................. 17
 DEVICE LOGIC CONNECTION ........................................................................................................... 17
 INSTALLING OUTDOOR UNIT (ODU) – CLAMP ............................................................................... 18
 HEADER CONNECTION..................................................................................................................... 18
 LED DISPLAY .......................................................................................................................................... 19
 RF SIGNAL ADJUSTMENT ................................................................................................................ 19
2 MANAGING CPE DEVICE.......................................................................................... 21
 WEB LOGIN ..................................................................................................................................... 21
3 LTE CONFIGURATION .............................................................................................. 21
 OVERVIEW ........................................................................................................................................ 21
 ND&S CONFIGURATION.................................................................................................................. 23
 PLMN SELECTION ........................................................................................................................... 23
 CELL SELECTION.............................................................................................................................. 24
 PDN SETTING .................................................................................................................................. 25
 SIM CARD ........................................................................................................................................ 26
4 NETWORK CONFIGURATION ................................................................................... 26
 INTERNET.......................................................................................................................................... 26
 LAN SETTING................................................................................................................................... 27
 ROUTER/ NAT MODE........................................................................................................................ 28
 VPN SETTING UNDER ROUTER MODE ........................................................................................... 29
 L2 BRIDGE MODE.............................................................................................................................. 29

Page 8
 VPN SETTING UNDER L2 BRIDGE MODE ....................................................................................... 30
 L2 SERVICE UNDER L2 BRIDGE MODE .......................................................................................... 30
 VLAN SETTING UNDER L3 BRIDGE MODE .................................................................................... 31
 QOS SETTING................................................................................................................................... 31
 DDNS SETTING UNDER ROUTER MODE ........................................................................................ 32
 TRAFFIC CONTROL SETTING UNDER ROUTER MODE .................................................................... 32
5 SECURITY CONFIGURATION.................................................................................... 33
 FIREWALL ......................................................................................................................................... 33
 ALG ................................................................................................................................33
 DEFENSE........................................................................................................................................... 34
 ACCESS RESTRICTIONS................................................................................................................... 35
6 APPLICATIONS CONFIGURATION ............................................................................ 37
 PORT RANGE FORWARDING ............................................................................................................ 37
 PORT FORWARDING ......................................................................................................................... 37
 DMZ ..................................................................................................................... 37
 UPNP.................................................................................................................... 38
 PORT TRIGGERING ........................................................................................................................... 38
7 MANAGEMENT ........................................................................................................ 39
 DEVICE MANAGEMENT..................................................................................................................... 39
 TR069 .................................................................................................................. 40
8 MAINTENANCE........................................................................................................ 41
 GENERAL .......................................................................................................................................... 41
 FIRMWARE UPGRADE....................................................................................................................... 42
 CONFIG MANAGEMENT .................................................................................................................... 43
 PING.................................................................................................................................................. 43
 IPERF................................................................................................................................................. 43
 SYSTEM RESET................................................................................................................................. 44
9 STATUS ............................................................................................................................44
 SYSTEM............................................................................................................................................. 44
 NETWORK ......................................................................................................................................... 45
 LAN...................................................................................................................... 46
10 FAQ AND TROUBLESHOOTING ................................................................................ 47

Page 9
1. Overview
CPE8100/CPE8101 is a high performance LTE CPE family (Customer
Premises Equipment) product designed to enable quick LTE service
deployment to the remote customers. It provides high data throughput and
networking features to end users who need both bandwidth and data
roaming capabilities in the remote area.
CPE 8100\CPE 8101 – Common LTE Features
LTE Interface
Standard Compliance
3GPP Rev. 9, UE Cat 4
3GPP Rev. 9, UE Cat 5 (Telrad BS Only)
Duplex Mode
TDD
Frequency Bands
B40 (2.3-2.4GHz), B41(2.4-2.7GHz)
3.3-3.4GHz, B42 (3.4-3.6GHz), 43 (3.6-3.8GHz)
Channel bandwidth
(MHz)
*5, 10, *15, 20
*note only 10/20MHz supported on part 96 certified CPE8100
Modulation
DL: MCS1 - MCS28 (QPSK, 16QAM, 64QAM)
UL: MCS1 – MCS28 (QPSK, 16QAM, 64QAM)
Uplink 64QAM with Telrad eNodeB
L1
MIMO TM1, TM2, TM3,TM4 ,TM8
L2 & L3
Multiple APN
PLMN and Cell Selection
Authentication
USIM and SIM function
QoS
Non-GBR, GBR
MTU Size
Layer 2 - 1,600 bytes
Layer 3 – 1,500 bytes (1,400 bytes - 3GPP recommended)

Page 10
CPE 8100 Product Highlights
Frequency Bands
3.3-3.8GHz (Band 42, Band 43 & 3.3GHz ) *B48(3.55-3.7)
* B48 only in US with use of domain proxy and Certified
professional installer is required
LTE UE Category
Category 4 (Any BS)
Category 5 (Telrad BS Only)
LTE Tx Power 27 dBm
Peak Antenna Gain 15dBi
User management Web Gui / TR69
Dimensions 203 x 203 x 76 mm / 1.5Kg
8.0 x 8.0 x 3.0 in / 3.3 lb
Environmental
IP67 rating
Operational Temperature
Temperature range : -40℃ ~ 55℃
Package content
CPE, POE, Power cable (US or EU), Mount Kit, Ethernet cable
CPE 8100 Electrical / Physical Specifications
Physical Interface
LAN – 10/100/1000M Base-T port
SIM - 1.8V and 3.3V
Antenna
1TX/2RX, 15dBi
Power Source
PoE
Environmental
IP67 - withstands harsh weather and outdoor environments
Operating Temperature
-40° to 55°C
Humidity
5% to 95% non-condensing
Regulatory Compliance
FCC
IC
CE
CPE8100 PoE Adapter Specification
Power Source
100~240VAC
Output Power (PoE)
48V / 0.32A
User Interfaces
Data only model : 1xLAN RJ45 10/100/1000 Mb
Maximum cable length
100m