Telrad CPE12350 User manual

Telrad CPE12350 User Manual
CPE User Manual V0.1
1
Telrad CPE12350 User Manual

Telrad CPE12350 User Manual
CPE User Manual V0.1
2
Index
1. About this Manual............................................................................4
2. Product Overview.............................................................................4
3. Login.....................................................................................................4
4. Home page..........................................................................................5
4.1 LTE .......................................................................................................... 5
4.1.1 Overview ............................................................................................................ 5
4.1.2 ND&S................................................................................................................. 6
4.1.3 PLMN Selection................................................................................................. 6
4.1.4 Bearer Settings.................................................................................................... 7
4.1.5 PIN Management................................................................................................ 8
4.2 Network .................................................................................................... 8
4.2.1 Overview ............................................................................................................ 8
4.2.2 Internet................................................................................................................ 8
4.2.3 LAN.................................................................................................................... 9
4.2.4 VPN.................................................................................................................. 10
4.2.5 Qos.................................................................................................................... 10
4.3 Applications............................................................................................. 10
4.3.1 Port forwarding................................................................................................. 10
4.3.2 DMZ................................................................................................................. 11
4.3.3 DDNS ............................................................................................................... 11
4.4 Management .............................................................................................11
4.4.1 Device Management......................................................................................... 11
4.4.2 TR069............................................................................................................... 12
4.4.3 SNMP............................................................................................................... 13
4.5 System .................................................................................................... 13
4.5.1 Password........................................................................................................... 13
4.5.2 Config Management ......................................................................................... 13
4.5.3 Firmware Update.............................................................................................. 14
4.6 Maintenance............................................................................................. 14

Telrad CPE12350 User Manual
CPE User Manual V0.1
3
4.6.1 Ping................................................................................................................... 14
4.6.2 Iperf .................................................................................................................. 15
4.6.3 Traceroute......................................................................................................... 15
5. Preface ............................................................................................. 16
5.1.1 Preface of product highlights and specifications.............................................. 16
5.1.2 LTE Specification............................................................................................. 16
5.1.3 Special Features :.............................................................................................. 17
6. Mechanical Chapter ..................................................................... 17
6.1.1 Installation........................................................................................................ 17
6.1.2 To mount the CPE to wall ................................................................................. 18
6.1.3 Install the USIM card: ....................................................................................... 18
6.1.4 Product Shipping Package ................................................................................ 19
7. Revision History............................................................................ 19

Telrad CPE12350 User Manual
CPE User Manual V0.1
4
1. About this Manual
The content of this User Manual has been made as accurate as possible.
However, due to continual product improvements, specifications and other
information are subject to change without notice.
2. Product Overview
This CPE supports LTE B42/43/48/46 (Subject to the configuration of LTE
module) and it supports popular operating systems like Windows, Linux and Mac.
Once you have identified the place for CPE, insert USIM card supplied by your
service provider at the appropriate place, plug in the adapter in the AC socket and
DC in the power port of CPE. Power On device, after few minutes the CPE should
attach itself to the LTE network. It is as simple as that. It is advised to read this
manual at leisure to make best use of the CPE.
3. Login
Open your Web browser and enter 192.168.0.1, username: admin, Password:
admin.

Telrad CPE12350 User Manual
CPE User Manual V0.1
5
Figure 3-1-1 Login
4. Home page
4.1LTE
There are 6 function on this page, they are “Overview”, ”ND & S”, ”PLMN
Selection”, “eNB Settings”, “Bearer Settings”, “PIN Management”
Figure 4-1-1 LTE
4.1.1 Overview
There are more LTE information on this page, they are “Serial Number”, “IMEI”, “IMSI”,
“Supported Band”, “Firmware version”and so on.

Telrad CPE12350 User Manual
CPE User Manual V0.1
6
Figure 4-1-1-1 Overview
4.1.2 ND&S
On this page include “Uplink QAM64”, “Scan Mode”and “Band”
Figure 4-1-2-1 ND&S
Uplink QAM64: Enable/Disable
Scan Mode: Full band/Dedicated Earfcn
Band: Supported Band selection (Default band is 46)
4.1.3 PLMN Selection
On this page, include “Network Mode “and “Allow Roaming”

Telrad CPE12350 User Manual
CPE User Manual V0.1
7
Figure 4-1-3-1 PLMN Selection
Network Mode: there are two modes Nomadic, Mobile
Allow Roaming:
If “allow roaming” is checked, then CPE first selects eNBs from the Home/ Equivalent
PLMN-IDs, Otherwise If not available, it tries connection to “any” PLMN-ID.
If “allow roaming” is not checked, the CPE is allowed to connect to eNBs from Home/ Equivalent
PLMN-IDs only.
Equivalent PLMN-ID List: Home PLMN-ID can be created automatically from SIM’s
IMSI (read-only). Customer can also add PLMN-ID.
Nomadic:
Preferred eNB List: Enable/ disable “preferred” selection checkbox
Lock ND&S to the preferred list: limit eNB selection to the “preferred” list only. Condition –
this checkbox should be possible only if “enable preferred list” is checked.
Auto-Rescan Duration: Forces CPE to perform periodic re-scan/ re-connection (Nomadic mode
only) –in order to connect to the best/ preferred eNB according to the “best eNB list”
Preferred eNB list: configure “preferred” list
4.1.4 Bearer Settings
The default APN is “internet”, if you want to configure the LTE APN, you can add
the new APN and change default APN, then you can configure the APN settings by
clicking on the “ ” button.

Telrad CPE12350 User Manual
CPE User Manual V0.1
8
Figure 4-1-4-1 Bearer Settings
4.1.5 PIN Management
From this page, you can see the USIM card status and PIN status.
The default PIN status is disabled; you can input the correct PIN to enable the
PIN function. The maximum PIN attempts are 3, otherwise you must enter PUK to
reset the PIN code. The USIM will be invalid after the unsuccessful attempts for 10
times.
Figure 4-1-5-1 PIN Management
4.2Network
4.2.1 Overview
On this page, you can see LAN setting information. They are “LAN IP address”, “LAN Subnet
Mask”, “Local DNS”, “LAN Porte Status”, “Speed / Duplex”, “Sent(Errors/Dropped)”,
“Received(Error/Dropped”, “RX CRC Errors”and so on.
Figure 4-2-1-1 Overview
4.2.2 Internet
On this page, include “Connection Mode”, “NAT”, “MGMT and Date Interface”, and “MTU”.

Telrad CPE12350 User Manual
CPE User Manual V0.1
9
Figure 4-2-2-1 Internet
Connection Mode: Route/NAT, L2 Bridge(GRE), L3 Bridge
NAT: Default Enable
MGMT and Date Interface: Combine/ Separate
4.2.3 LAN
On this page, include “LAN Reset”, “Device IP”and “DHCP”
Figure 4-2-3-1 LAN
LAN Reset: Restore of LAN default setting.
Duplex: Auot/Full/Half
Max Bit Rate: 10Mbps/100Mbps/1000Mbps
Local IP Address：Enter the IP address of your router (factory default:
192.168.0.1).
Subnet Mask：An address code that determines the size of the network.
Normally use 255.255.255.0 as the subnet mask.
DHCP：Defaul Enable
DHCP Address Allocation: Specify an IP address for the DHCP server to start
and end with when assigning IP address.
DHCP lease time: The Lease Time is the amount of time a network user will
be allowed connection to the router with their current dynamic IP address.
Enter the amount of time in minutes and the user will be "leased" this
dynamic IP address. After the time is up, the user will be assigned a new
dynamic IP address automatically.
Static IP - IP/MAC binding function, the system will assign a fixed IP address
to the MAC according to the rules.

Telrad CPE12350 User Manual
CPE User Manual V0.1
10
4.2.4 VPN
A virtual private network (VPN) is a point-to-point connection across a private
or public network (Internet).
VPN Passthrough allows the VPN traffic to pass through the router. Thereby
we can establish VPN connections to remote network.
Figure 4-2-4-1 VPN
4.2.5 Qos
On this page, include “DSCP Configuration”and “TOS Configuration”, you can change Qos
setting by manual.
Figure 4-2-5-1 Qos
Data Traffic DSCP: Default value is 0. The range is 0~63.
Management Data DSCP: Default value is 6. The range is 0~63.
Data Traffic TOS: Default value is 0. The range is 0~63.
Management Data TOS: Default value is 0. The range is 0~63.
4.3Applications
4.3.1 Port forwarding
Clicking on the “ ” button, you can configure IP address, port range to achieve the port
forwarding purpose.

Telrad CPE12350 User Manual
CPE User Manual V0.1
11
Figure 4-3-1-1 Port Forwarding
4.3.2 DMZ
From this page, you can configure a De-militarized Zone (DMZ) to separate internal network
and Internet.
Figure 4-3-2-1 DMZ
DMZ Enable: Default value is Disable
DMZ Host IP address: The IP address of your PC.
Exclude Web Server Port: Default value is Disable
Exclude Remote Port 443: Default value is Disable
Exclude Ping: Default value is Disable
4.3.3 DDNS
The dynamic DNS function is disabled in default, you can choose the dynamic
DNS provider to configure the DDNS settings.
Figure 4-3-3-1 DDNS
4.4Management
4.4.1 Device Management
On this page, include “Allow ping from WAN ”, “Telnet Service”, “SSH Service”, “Access
Control ”

Telrad CPE12350 User Manual
CPE User Manual V0.1
12
Figure 4-4-1-1 Device Management
4.4.2 TR069
On this page, include “TR069 Enable” and “TR069 Configuration”
Figure 4-4-2-1 TR069
TR069: Default value is Enable
ACS Interface: Default value is “lte0pdn0”
ACS Port: Default value is “7547”
ACS URL: Default “http://192.168.100.67:8080/dps/TR069”
ACS Username: Default value is “acs”
ACS Password: Default value is “acs”
Re-enter Password: Default value is “acs”
Periodic Inform Enable: Default value is Enable
Periodic Inform Interval: Default value is “100”, Range is “90-604800”
Periodic Inform Time: Default value is “2001-01-01”~“00-00-00”
CPE Username: Default value is “cwmp”
CPE Password: Default value is “cwmp”

Telrad CPE12350 User Manual
CPE User Manual V0.1
13
Re-enter Password: Default value is “cwmp”
4.4.3 SNMP
On this page, include “Snmpd”, “Snmpd Read Only Community”, “Snmpd Read Write
Community”, you can change setting by manual.
Figure 4-4-3-1 SNMP
Snmpd: Default value is Enable
Snmpd Read Only Community: Default value is “public”
Snmpd Read Write Community: Default value is “public”
4.5System
4.5.1 Password
The default password is admin, you can enter 1~32 characters for 2 times as your new password.
Then you would logout automatically and you should login to the system by the new password.
Figure 4-5-1-1 Password
4.5.2 Config Management
Clicking the “Export” button, the current settings will be saved as a data file to the local PC.
You can restore the device configuration from the files that you saved.

Telrad CPE12350 User Manual
CPE User Manual V0.1
14
Figure 4-5-2-1 Config Management
4.5.3 Firmware Update
On this page, you can upgrade the current Router version from the local PC. 30s is needed to
complete the whole upgrade process, and then the device will reboot automatically.
Figure 4-5-3-1 Firmware Update
4.6Maintenance
4.6.1 Ping
On this page, you can ping IP address by manual.
Figure 4-6-1-1 ping

Telrad CPE12350 User Manual
CPE User Manual V0.1
15
4.6.2 Iperf
On this page, you can use the page of “iperf”, test throughput function.
Figure 4-6-2-1 Iperf
Status: Default value is “Enable”
Server Address: Default value is “8.8.8.8”
Server Port: Default value is “5001”, the range is 1024~65535
Management Port: Default value is “5001”, the range is 1024~65535
Measurement Time: Default value is “60”
Protocol Type: TCP/UDP
Windows size: Default value is “256”
TCP Client Number: Default value is “1”, the range is 1~10
4.6.3 Traceroute
On this page, you can Trace IP address by manual.

Telrad CPE12350 User Manual
CPE User Manual V0.1
16
Figure 4-6-3-1 Traceroute
5. Preface
5.1.1 Preface of product highlights and specifications
5.1.2 LTE Specification
Key features
Specification
3GPP Version
Release 12
UE category
Category 12
Bandwidth-No CA
5,10,15,20MHz
CA support
5+5/ 10+10 / 15+15 / 20+20MHz
MIMO
4x2 and 2*2
UL/DL sub frame configuration
Configuration 1,2,3,4,5,6
Special sub frame configuration
0,1,2,3,4,5,6,7,8
Transfer mode
TM1, TM2, TM3, TM4, TM7,TM8,TM9
Data Speed
Down load420Mbps, Up load 80Mbps
Item
Description
Size
330(L) x 330(W) x 75(H) mm(IP67)
Color
Off-White
LED
Power, ETH, SIM, 5 RF CINR bars
RJ45 connector
1 Giga port, need support passive POE 56V
USIM Interface
1 USIM interface inside the cover
External Antenna port
Not support

Telrad CPE12350 User Manual
CPE User Manual V0.1
17
5.1.3 Special Features :
RJ45
1 Giga Ethernet Ports with passive PoE PIN enabled（56V）
USIM interface
One USIM interface under the cover
Ethernet Protocol
10/100/1000Mb protocol
IP Routing
TCP,UDP,ICMP,ARP
General
DHCP,NAT/NATP
Power supply
Passive POE
Max power consumption
56V / 0.45A
Maxim length of Ethernet
cable
100 meters
Water & Dust Protection
IP67
Operating Temperature
-30 to +60 ºC
Humidity
0 to 95%
6. Mechanical Chapter
6.1.1 Installation
Installation as below:
Figure 6-1-1-1 Mechanical

Telrad CPE12350 User Manual
CPE User Manual V0.1
18
6.1.2 To mount the CPE to wall
To mount the CPE to wall, follow the steps below:
Figure 6-1-2-1 To mount the CPE to wall
6.1.3 Install the USIM card:
This CPE is specially designed for the 4G LTE network. Please check that you have a valid
USIM card from the service provider.
1. USIM Card Slot
This slot is for inserting the USIM card.
2. PoE Port
This Port is used for connecting PoE Power Supply using an Ethernet Cable (This cable must
have all four pairs connected to the RJ45 connector). Do not use low cost cables that have only
two pairs connected.

Telrad CPE12350 User Manual
CPE User Manual V0.1
19
Figure 6-1-3-1 Install the USIM card
6.1.4 Product Shipping Package
1. Main Lable
On Main Label, you can see IMEI/MAC/SN on it.
Figure 6-1-4-1 Main Label
7. Revision History
Author
Revision
Changes
Date
Fhan
1.0
Create Draft
2020-11-04
Fhan
1.1
Change Main Label
2020-12-09

Telrad CPE12350 User Manual
CPE User Manual V0.1 20
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
RF Exposure Warning Statements:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure