tempio HY607 User manual

HY607 & HY08AC WIFI fan coil unit thermostat manual
Search for "Smart Life " “Smart
Heating “Download the Wi-Fi
App with the following icon
The App advanced password is 1 3456
Turn on the thermostat, press and hold the key
combination “ ” and
“ ” Activate WIFI for HY607
“SET ” Activate WIFI for HY08
Application
HY607AC series fan coil thermostat is suitable for controlling central air conditioning and fan coil
unit. By comparing the indoor temperature and setting temperature, to adjust fan coil unit and turn
on /off electric valve. to realize adjust temperature and saving energy purpose. HY08AC adopts
microcomputer control technology, large-screen display, and have following display status:
working state (cooling, heating, ventilation), fan speed (high, medium, low, automatic), indoor
temperature, setting temperature, clock, seven days and four time periods Time programming,
timing switch, etc.
Technical data
Voltage: AC200~240V, Output ： On/off type
Current: 3A for valve,5A for fan IP ： IP20
Accuracy: ±0.5ºC Display temperature range ： 0~70°C
Setting range: 5ºC - 35ºC work environment: ： -10~60°C
Sensor: ： NTC(10k)1% Size ： 86 * 86mm
Mounted ： wall type
Button
No: Icon Description
A Increase key
： short press to adjust number and temperature, long
press to check external senor temperature
B To choose setting item
C Decrease key ： short press to adjust number and temperature
D Fan key ； when work with “ ” key together, then “confirm” key
E Power key
F &
SET
Press them together for Wi-Fi mode: HY607 &HY08
WIFI connected ， If flashing, then matching Wi-Fi mode
： Wi-Fi disconnection
: cloud icon ,if flashing ,then enter AP mode
Operation
Operation Description Legend
Turn
on/off
Press “ ”to turn on ； press again to
turn off ， meanwhile closed fan coil unit
and electrical valve 。
Display main interface
Setting
temperatu
re
Thermostat turn on ， press“ ”to
decrease setting temperature ，
press“ ”to increase setting ， each time
change by 0.5
℃
。
Fan
Speed
Thermostat turn on ， press “ ”to
choose fan speed (high Mid, low ,auto)
Setting
time
Thermostat turn on ， press “
or
SET ”3-5s ， chose ， then
press“ ”to set time ：
Minute“mm ”flashing ， press“ ”or“ ”to
adjust ， press“ ”to next setting.as
same method to set hour and week.
Finally press or wait 5S to exit
Timer for
turn on/off
After connected Wi-Fi, click “cloud” on
the right corner of APP to set For HY607 only
Working
mode
Thermostat turn on ， long press“ or
SET ”3-5S ， choose ,next press to
choose mode 。
“ ” mean cooling mode ， “ ” mean
heating mode ， “ ”mean ventilation
mode ； mean auto mode
Manual/
program
mode
Thermostat turn on ， short press“
o
r
SET ” to run programmable mode ：
press again to run manual mode
Both HY607 & HY08
Control
valve
When cooling mode (heating mode) ，
indoor temperature more （ lower) 1
℃
than setting temperature ， open valve ；
after equal ， closed valve ， fan will still
be running 。
Ventilation mode （ fan is not control by
temperature as default ）
If fan be controlled by temperature, then
valve and fan will be closed.
Locked
function
If open locked function, then it will be
auto locked and if there is no operation
within 10S. Long press to unlock
Alarm E1 ： inner sensor alarm 。
E2 ： external sensor alarm
When temperature more than
55
℃
,then display “HI” 。
When temperature lower than 0
℃
,
then display “LO”
Sleep
mode
Long press , is flashing ， short
press to run it ， short press to
cancel
Note ： Sleep mode is not available when
run ventilate mode or auto mode
Warranty ： We offer operation warranty of 18 months, from date of sales to cover any issue due to
quality and workmanship defect. service.
=
=

Set Programmable
HY607AC thermostat support set different time and different temperature ； Compatible with
5+2,6+1,7days Programmable settings.
Long press or SET 3-5S ， next short
press
or SET to choose ， then short
press to set programmable ， use
and to adjust value 。 After short
press to set next time section setting
For HY607 Only
Time
section Icon Time (default)
Temperatu
re(default)
Monday
to
Sunday
1 106:00 20°C
2 208:00 15°C
3 317:00 22°C
4 422:00 15°C
Advance setting
Turn off thermostat, long press 5S to enter press“ ”or“ ”to set parameter, Short press
to set next item
Symbol Item Parameter Default
A1 Temperature
Calibration
-9-+9
℃
0.5
℃
Accuracy
Calibratio
n
A2 Children Lock
1 ： half lock
0 ： full lock 1
A3 Setting the lowest limit temperature 5-15
℃
5
℃
A4 Setting the highest limit temperature 16-50
℃
35
℃
A5 Fan is control by temperature 0=YES
1=NO
0
A6 Programmable
0=5+2
1=6+1
2=7
0
A7 Choose valve output 2
： 2pipe
4:4 pipe
4
A8 Choose sensor
N1:inner sensor
N2:external
sensor
N3:Double
sensor
N1
A9 Set temperature for external sensor 20-60°C 38°C
AA Backlight sleep brightness
0:no backlight
1: 50% backlight
2: 100%
backlight
1
AB Reset
Display A o,
press key
until whole show
Ao
Remark: If choose N3 for A8 item ， ①In the cooling state, normally only valve is opened. When the
temperature is detected to be lower than (X-2) °C, the fan is turned on. When the fan detects the
temperature ≥X°C, the fan is turned off ； ②In the heating state, normally only valve is opened , and
the fan is turned on when the external temperature is detected to be ≥X°C. When the temperature
is detected to be lower than (X-2) °C, the fan is turned off.
Wiring Diagram
Cautions on Installation:
1.To prevent the thermostat display from a high fluctuation, special treatment has been made to
the program. Therefore, it is normal that the thermostat cannot immediately display the sudden
change of temperature.
2. The thermostat installed on 1.5m above the ground.
3.For the thermostat installed, please ensure not to install it to the wall corner, door / window side
or behind the door or in such unheated area as exterior wall. Avoid hot / cold air duct, radiator, flue
or thermal pipe
4 When install the power supply, make sure that the power cable is well insulated.
5.Don’t open the internal circuit board..
6.HY08AC series thermostat design for the standard 75x75x 35mm wall mount box installed.
follow the instructions to open the rear cover base, mount it on the wall and wire it.
CAUTION
Electrical shock or equipment Damage Hazard. or short equipment circuitr .
Before installing the thermostat, make sure that the s stem is disconnected. The maximum voltage of
the s stem shall meet the requirements specified in the Instruction Manual (Max. AC Voltage: 250V).