Tesla SMART SENSOR SIREN User manual

1
USER MANUAL
TESLA SMART
SENSOR SIREN
EN
SK
SL
HR
DE
PL
UA
RU
CZ
HU

2
Packing List
Check if the product is in good condition. Make sure it contains the below
accessories.
1X Alarm Siren 3M sticker x1
power adapter x1 QC PASS certificate x1
QC PASS
Two expansion tubes and
two screws
User manual x1

3
Appearance and Components Basic Functions
Product appearance
LED indicator (red ring)
Buzzer
Volume buttons Anti-tamper switch OFF/ON button
Power input

4
Product Features
1. Sound&flash alarm for 100 dB.
2. Low voltage monitoring and indication function.
3. Periodically sends online reports to the gateway.
4. Anti-tamper design.
5. Wireless transmission, easy to install.
6. ABS material housing, radiation-resistant and heat-resistant.
Power-On and External Power Supply
1.First time power on, LED is on for 3 s.
2. When battery power, press the OFF/ON button for more than 3s to turn
OFF/ON.
3. Network setting /exit setting: press both volume + and volume- at the
same time for more than 5s.
Note: When receiving alarm signal
from gateway, the status indicator
will flash and the buzzer beeps.
To clear the alarm, please operate
on App.
Press volume + and - buttons

5
Basic Functions
1. Network setting: press the volume + and volume-buttons at the same time,
the red light will be on for 5s. Release the button to set network, LED flashes
for network setting. LED is always on for 3s then off. If failed, the LED will
be off directly.
2. Volume adjustment: When the siren alarms, press the volume + and - to
adjust.
3. Anti-tamper switch. When siren is removed, siren will alarm. To cancel the
alarm, please press anti-tamper switch for 3 times, or operate on App.
4.LED Indicator
Power on/off: LED is on for 3s, buzzer beeps twice.
Low voltage: LED flashes every 20s.
Network setting: LED flashes.
Power off: Buzzer beeps once.
Network timeout: LED changes from flash to off.
Network setting success: LED is on for 3 seconds and off.
Installation Position and Precautions
1. Install the product on an indoor tile, gypsum wall, or painted wood.
2. Building materials, such as reinforced concrete, will shorten the wireless
communication distance.

6
O FF/O N
Product Installation
Add the siren to the gateway as an accessory based on the gateway user
manual.
1. Rotate the mounting base counterclockwise to remove it from the
product.
2. Power on the product.

7
3. Use expansion tube and screws or a 3M sticker to fix the mounting base
on a wall. Rotate the product clockwise into the mounting base. If you use a
3M sticker, ensure that the installation surface is smooth and stable. Clean
the surface before mounting to prevent the product from falling off.
4. Connect the siren to the power adapter.

8
Technical Parameters
Wireless Technology ZigBee
Working Voltage 12 V (power adapter)
Transmission Frequency 2.4 GHz
Working Temperature -10°C to +55°C
Built-in Battery 3.7 V lithium battery
Standby Time Over 24 hours
Relative Humidity < 90%
Dimensions Ø80 mm x 34.5 mm
INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for separate collection. The product
must be disposed of in accordance with the regulations for disposal of
electrical and electronic equipment (Directive 2012/19/EU on waste electri-
cal and electronic equipment). Disposal together with regular municipal
waste is prohibited. Dispose of all electrical and electronic products in accor-
dance with all local and European regulations at the designated collection
points which hold the appropriate authorisation and certification in line with
the local and legislative regulations. Correct disposal and recycling help to
minimise impacts on the environment and human health. Further information
regarding disposal can be obtained from the vendor, authorised service
centre or local authorities.

9
EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type TSL-SEN-SIREN
is in compliance with EU directives. The full text of the EU declaration of
conformity is available at the following internet address:
teslasmart.com/declaration
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.412 - 2.472 MHz
Max. radio-frequency power (EIRP): < 20 dBm
Manufacturer
Tesla Global Limited
Gee Chang Industrial Building,
121 Des Voeux Road Central
852 00 Hong Kong
www.teslasmart.com

10