Texas Instruments TPA3250D2EVM User manual

User's Guide
SLVUAM9–December 2015
TPA3250D2EVM
This user’s guide describes the operation of the evaluation module (TPA3250D2EVM) for the TPA3250D2
175-W Stereo/350-W mono peak power PurePath™ Ultra-HD Analog Input Pad Down Class-D Amplifier.
The user’s guide also provides design information, which includes schematic, Bill of Material, and PCB
layout. For questions and support go to the E2E forums (e2e.ti.com).
The main contents of this document are:
• Hardware descriptions and implementation
• Design information
Related documents:
• TPA3250D2 Data Sheet (SLASE99)
Contents
1 Hardware Overview.......................................................................................................... 2
1.1 TPA3250D2EVM Features ........................................................................................ 2
1.2 TPA3250D2EVM Frequency Adjust.............................................................................. 2
1.3 TPA3250D2EVM Single-Ended and Differential Input......................................................... 3
1.4 TPA3250D2EVM Clip Overtemperature and Fault Indicators ................................................ 4
2 TPA3250D2EVM Setup..................................................................................................... 5
2.1 TPA3250D2EVM Setup............................................................................................ 5
2.2 Hardware Requirements........................................................................................... 5
2.3 Hardware Default Setup BTL (2.0) ............................................................................... 6
3 Using TPA3250D2EVM in Different Output Configurations............................................................ 7
3.1 BTL Plus Two SE (2.1) Operation................................................................................ 7
3.2 PBTL (0.1) Output Operation...................................................................................... 7
3.3 Single-Ended (SE) Output (4.0) Operation...................................................................... 8
4 Board Layouts, Bill of Materials, and Schematic ........................................................................ 9
4.1 TPA3250D2EVM Board Layouts ................................................................................. 9
4.2 TPA3250D2EVM Board Dimension............................................................................. 11
4.3 Bill of Materials .................................................................................................... 12
4.4 TPA3250D2EVM Schematic..................................................................................... 16
List of Figures
1 TPA3250D2EVM............................................................................................................. 2
2 TPA3250D2EVM Connections............................................................................................. 5
3 TPA3250D2EVM Top Composite Assembly............................................................................. 9
4 TPA3250D2EVM Bottom Composite Assembly........................................................................ 10
5 TPA3250D2EVM Board Dimension...................................................................................... 11
6 TPA3250D2EVM Schematic.............................................................................................. 16
List of Tables
1 Frequency Adjust Master Mode Selection................................................................................ 3
2 Fault and Clip Overtemperature Status................................................................................... 4
3 Mode Selection Pins......................................................................................................... 7
4 Bill of Materials ............................................................................................................. 12
PurePath is a trademark of Texas Instruments.
1
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Hardware Overview www.ti.com
1 Hardware Overview
The TPA3250D2EVM PurePath™ Ultra-HD evaluation module demonstrates the TPA3250D2DDV
integrated circuit from Texas Instruments. The TPA3250D2DDV is a high-performance, high-power, class-
D amplifier that enables true premium sound quality with high efficiency class-D technology. It features an
advance integrated feedback design and high-speed gate driver error correction (PurePath Ultra-HD),
which enables ultra-low distortion across the audio band and superior audio quality. This EVM supports 2
BTL (stereo 2.0) output channels, 1 PBTL (mono 0.1) output channel, 1 BTL plus 2 SE (2.1) output
channels, and 4 SE (4.0) output channel configurations. The NE5532 is a high-performance audio op amp
designed to allow TPA3250D2DDV operation with differential or single-ended input signals to the EVM
with differential inputs yielding the optimal performance. TPA3250D2EVM is a complete 2Vrms analog
input 175 W stereo/350 W mono peak power (90 W Stereo continuous into 8 Ω) amplifier ready for
evaluation and excellent listening experience.
Figure 1. TPA3250D2EVM
1.1 TPA3250D2EVM Features
The TPA3250D2EVM has following features:
• Stereo PurePath Ultra-HD evaluation module
• Self-contained protection system (short circuit, clip, and thermal)
• Standard 2 VRMS differential input or single-ended line input
• BTL, PBTL, and SE output configuration support
• Frequency adjust and oscillator sync interface
• Single supply voltage range 18–38 V
• Double-sided, plated-through, 2-oz Cu, 4-layer PCB layout
1.2 TPA3250D2EVM Frequency Adjust
The TPA3250D2EVM offers hardware trimmed oscillator frequency by external control of the FREQ_ADJ
pin. The Frequency adjust can be used to reduce interference problems while using a radio receiver tuned
within the AM band, the switching frequency can be changed from nominal to lower values. These values
should be chosen such that the nominal and the lower value switching frequencies together results in the
fewest cases of interference throughout the AM band. The oscillator frequency can be selected by the
value of the FREQ_ADJ resistor connected to GND in master mode according to Table 1.
2TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Hardware Overview
Table 1. Frequency Adjust Master Mode Selection
Master Mode Resistor to GND (kΩ)
Nominal 10
AM1 20
AM2 30
For slave-mode operation, turn off the oscillator by pulling the FREQ_ADJ pin to DVDD. This configures
the OSC_I/O pins as inputs to be slaved from an external differential clock. In a master/slave system inter-
channel delay is automatically setup between the switching phases of the audio channels, which can be
illustrated by no idle channels switching at the same time. This will not influence the audio output, but only
the switch timing to minimize noise coupling between audio channels through the power supply. This will
optimize audio performance and result in better operating conditions for the power supply. The inter-
channel delay will be setup for a slave device depending on the polarity of the OSC_I/O connection such
that slave mode 1 is selected by connecting OSC_I/O of the master device in phase with OSC_I/O of the
slave device (+ to + and – to –), while slave mode 2 is selected by connecting the OSC_I/O's out of phase
(+ to – and – to +).
1.3 TPA3250D2EVM Single-Ended and Differential Input
The TPA3250D2EVM supports both differential and single-ended inputs. For single-ended inputs, J4
and/or J19 jumpers are set to the SE position, so that the TPA3250D2EVM uses the NE5532 to convert
the single-ended input signal to differential to properly drive the differential inputs of the TPA3250D2. The
input RCA jack, J3, is used to provide INA and INB inputs and RCA jack J18 is used to provide INC and
IND inputs with single-ended inputs.
For differential input operation, J4 and/or J19 jumpers are set to the DIFF position, and the
TPA3250D2EVM uses the NE5532 to buffer the differential input signal to the differential inputs of the
TPA3250D2. The input RCA jack, J3, is used to provide INA, RCA jack J14 provides INB, RCA jack J18
provides INC, and RCA jack J15 provides IND with differential inputs.
NOTE: Single-ended input settings on the TPA3250D2EVM should only be used for channels with
output configuration BTL or PBTL, not SE. For SE output configuration J4 and/or J19
jumpers for that channel must be set to the DIFF position, so the input signal INx is mapped
directly to OUTx.
3
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Hardware Overview www.ti.com
1.4 TPA3250D2EVM Clip Overtemperature and Fault Indicators
The TPA3250D2EVM is equipped with LED indicators that illuminate when the FAULT and/or CLIP_OTW
pin goes low. See Table 2 and the TPA3250D2 data sheet (SLASE40) for more details.
Table 2. Fault and Clip Overtemperature Status
FAULT CLIP_OTW Description
Overtemperature (OTE) or overload (OLP) or undervoltage (UVP). Junction temperature higher
0 0 than 125°C (overtemperature warning).
Overload (OLP) or undervoltage (UVP). Junction temperature higher than 125°C (overtemperature
0 0 warning).
0 1 Overload (OLP) or undervoltage (UVP). Junction temperature lower than 125°C.
1 0 Junction temperature higher than 125°C (overtemperature warning)
1 1 Junction temperature lower than 125°C and no OLP or UVP faults (normal operation)
4TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com TPA3250D2EVM Setup
2 TPA3250D2EVM Setup
This section describes the TPA3250D2EVM hardware setup and connection.
2.1 TPA3250D2EVM Setup
Figure 2 illustrates the TPA3250D2EVM connection.
Figure 2. TPA3250D2EVM Connections
2.2 Hardware Requirements
The following hardware is required for this EVM:
• TPA3250D2EVM (AIP025-001)
• Power supply 5–14 A/18–38 VDC
• Two 4–8 Ω(≈100 W) speakers/resistor loads
• Four speaker/banana cables
• RCA input cables
• Analog output audio source
5
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

TPA3250D2EVM Setup www.ti.com
2.3 Hardware Default Setup BTL (2.0)
BTL (2.0) default hardware setup is as follows:
• Remove the EVM from the ESD bag.
• Check that jumpers are in their default state as shown in Figure 1 for stereo BTL operation:
– J4 and J19 pin 1-pin 2 position (SE Input)
– J5 and J6 pin 2-pin 3 position (2 BTL Output)
– J7, J8, J17, and J21 out
– J16 pin 3-pin 4 position (Master Mode)
– J22, J23, J24 and J25 in (BTL Outputs)
• Set S1 to the RESET position.
• Set power supply to 36 V (18- to 38-V range) and current to 10 A (5- to 14-A range). Do not power up
until all connections are completed.
• Connect power supply to TPA3250D2 EVM positive terminal to PVDD (RED) and negative terminal to
GND (BLACK).
• Connect left channel speaker/power resistor load (4–8 Ω) to TPA3250D2 EVM positive output terminal
to OUTA (BLACK) and AP analog input channel A positive terminal.
• Connect left channel speaker/power resistor load (4–8 Ω) to TPA3250D2 EVM negative output
terminal to OUTB (RED) and AP analog input channel A negative terminal.
• Connect right channel speaker/power resistor load (4–8 Ω) to TPA3250D2 EVM positive output
terminal to OUTC (BLACK) and AP analog input channel B positive terminal.
• Connect right channel speaker/power resistor load (4–8 Ω) to TPA3250D2 EVM negative output
terminal to OUTD (RED) and AP analog input channel B negative terminal.
• Be careful not to mix up PVDD and OUTD and OUTB terminals, since the colors are the same (RED).
• For single-ended stereo inputs, connect AP channel A XLR to RCA male jacks to female RCA jacks
input D/CD (RED) and AP channel B XLR to RCA male jacks to female RCA jacks input B/AB (WHITE)
and set J4 and J19 jumper positions to SE.
• For differential stereo inputs, connect positive RCA male jacks to female RCA jacks input D/CD
(RED) and input B/AB (WHITE) and connect negative RCA male jacks to female RCA jacks input C
(YELLOW) and input A (BLACK) and set J4 and J19 jumper positions to DIFF.
• Power up power supply once all the connections are made correctly and the 3.3-V LED (GREEN) will
illuminate.
• Set S1 to the NORMAL position.
• CLIP_OTWz (ORANGE) and FAULTz (RED) LEDs should be off, if the audio source is off.
NOTE: J3/J10 and J18/J15 can be used for differential inputs to INA/INB and INC/IND, respectively.
Using a smart phone/tablet/PC with headphone to RCA cable, audio streaming via headphone jack can
begin once the EVM is powered up correctly with jumpers in their default state. Start the media player of
your choice and enjoy the enhanced audio performance TPA3250D2 provides as a quick check of the
setup.
6TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Using TPA3250D2EVM in Different Output Configurations
3 Using TPA3250D2EVM in Different Output Configurations
The TPA3250D2EVM can be configured for four different output operations. The 2.0 BTL configuration is
the default set up of the TPA3250D2EVM described in Section 2.3. The remaining three configurations are
2.1 BTL plus two single-ended (SE) outputs, 0.1 PBTL output, and 4.0 single-ended (SE) outputs.
Table 3. Mode Selection Pins
Mode Pins Input Mode Output Configuration Description
M2 M1
0 0 2N + 1 2 × BTL Stereo BTL output configuration
0 1 2N/1N + 1 1 × BTL + 2 × SE 2.1 BTL + SE mode
Paralleled BTL configuration. Connect INPUT_C and INPUT_D to
1 0 2N + 1 1 × PBTL GND.
1 1 1N + 1 4 × SE Single-ended output configuration
3.1 BTL Plus Two SE (2.1) Operation
Configure the EVM as follows for 2 SE + 1 BTL operation:
• Set J6 to L and J5 to H.
• Connect left (stereo) speaker/power resistor load (4–8 Ω) positive terminal to OUTC and remove
jumper J24.
• Connect right (stereo) speaker/power resistor load (4–8 Ω) positive terminal to OUTD and remove
jumper J25.
• Connect subwoofer (mono) speaker/power resistor load (4–8 Ω) positive terminal to OUTA and
negative terminal to OUTB.
• Set J19 jumper position to DIFF.
• Connect left (stereo) channel input to female RCA jack input C (YELLOW) for OUTC speaker.
• Connect right (stereo) channel input to female RCA jack input D/CD (RED) for OUTD speaker.
• For single-ended subwoofer (mono) input, connect RCA male jack to female RCA jack input B/AB
(WHITE) and set J4 jumper positions to SE.
• For differential subwoofer (mono) inputs, connect positive RCA male jack to female RCA jack input
B/AB (WHITE) and connect negative RCA male jack to female RCA jack input A (BLACK) and set J4
jumper positions to DIFF.
NOTE: OUTC and OUTD are the single-ended output channels and OUTA and OUTB are the BTL
channel for 2.1 operations.
3.2 PBTL (0.1) Output Operation
Configure the EVM as follows for PBTL operations:
• Set J6 to H and J5 to L.
• Connect speaker/power resistor (2–4 Ω) positive terminal to OUTA and OUTC (OUT A and C shorted).
• Connect speaker/power resistor (2–4 Ω) negative terminal to OUTB and OUTD (OUT B and D
shorted).
• Install PBTL jumpers J7 and J8 (pulls input C and input D to GND).
• For single-ended mono input, connect RCA male jack to female RCA jack input B/AB (WHITE) and
set J4 jumper positions to SE.
• For differential mono inputs, connect positive RCA male jack to female RCA jack input B/AB
(WHITE) and connect negative RCA male jack to female RCA jack input A (BLACK) and set J4 jumper
position to DIFF.
7
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Using TPA3250D2EVM in Different Output Configurations www.ti.com
NOTE: INA and INB are the inputs for PBTL and INC and IND are grounded for PBTL operation.
3.3 Single-Ended (SE) Output (4.0) Operation
Configure the EVM as follows for 4 single-ended operations:
• Set J6 to H and J5 to H.
• Connect speaker/power resistor (4–8 Ω) positive terminal to OUTA and remove jumper J22.
• Connect speaker/power resistor (4–8 Ω) positive terminal to OUTB and remove jumper J23.
• Connect speaker/power resistor (4–8 Ω) positive terminal to OUTC and remove jumper J24.
• Connect speaker/power resistor (4–8 Ω) positive terminal to OUTD and remove jumper J25.
• Set both J4 and J19 jumpers position to DIFF.
• Connect input to female RCA jack input A (BLACK) for OUTA speaker.
• Connect input to female RCA jack input B/AB (WHITE) for OUTB speaker.
• Connect input to female RCA jack input C (YELLOW) for OUTC speaker.
• Connect input to female RCA jack input D/CD (RED) for OUTD speaker.
spacer
spacer
spacer
spacer
spacer
NOTE: The performance of the TPA3250D2EVM/TPA3250D2DDV is dependent on the power
supply. Design the power supply with margins that can deliver the needed power. In low-
frequency applications additional bulk capacitance may be needed. Replacing the bulk
capacitors on the TPA3250D2EVM with 3300 µF or more capacitance may be necessary,
depending on the power supply used.
8TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Board Layouts, Bill of Materials, and Schematic
4 Board Layouts, Bill of Materials, and Schematic
4.1 TPA3250D2EVM Board Layouts
Figure 3 and Figure 4 illustrate the board layouts for the EVM.
Figure 3. TPA3250D2EVM Top Composite Assembly
9
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Board Layouts, Bill of Materials, and Schematic www.ti.com
Figure 4. TPA3250D2EVM Bottom Composite Assembly
10 TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Board Layouts, Bill of Materials, and Schematic
4.2 TPA3250D2EVM Board Dimension
Figure 5 illustrates the TPA3250D2EVM board dimensions 140 mm × 120 mm.
Figure 5. TPA3250D2EVM Board Dimension
11
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Board Layouts, Bill of Materials, and Schematic www.ti.com
4.3 Bill of Materials
Table 4 displays the Bill of Materials for the TPA3250D2EVM.
Table 4. Bill of Materials
Package
Designator Qty Value Description Part Number Manufacturer
Reference
!PCB1 1 Printed Circuit Board AAP060 Any
C1 1 0.047 µF CAP, CERM, 0.047 µF, 25 V, ± 10%, X7R, 0402 0402 GRM155R71E473KA88D MuRata
C2, C9, C13, C14, 11 0.1 µF CAP, CERM, 0.1µF, 50 V, 10%, X7R, 0603 0603 C0603C104K5RACTU Kemet
C15, C22, C51,
C67, C69, C72,
C82
C3 1 1 µF CAP, CERM, 1 µF, 50 V, 10%, X7R, 0805 0805 GRM21BR71H105KA12L MuRata
C4 1 2.2 µF CAP, CERM, 2.2 µF, 50 V, 10%, X5R, 0805 0805 C2012X5R1H225K125AB TDK
C5 1 47 µF CAP, AL, 47 µF, 16 V, 20%, 0.36 Ω, SMD SMT Radial D EEE-FK1C470P Panasonic
C6, C17, C20, 9 10 µF CAP, AL, 10 µF, 16 V, 20%, 1.35 , SMD SMT Radial B EEE-FK1C100R Panasonic
C28, C55, C62,
C63, C66, C71
C7 1 5600 pF CAP, CERM, 5600 pF, 50 V, 10%, X7R, 0603 0603 GRM188R71H562KA01D MuRata
C8, C50 2 0.47 µF CAP, CERM, 0.47 µF, 25 V, 10%, X7R, 0603 0603 GRM188R71E474KA12D MuRata
C10 1 100 µF CAP, AL, 100 µF, 6.3 V, 20%, 0.7 , SMD SMT Radial C EEE-FK0J101UR Panasonic
C11, C26, C37, 6 0.01 µF CAP, CERM, 0.01 µF, 50 V, 10%, X7R, 0603 0603 GRM188R71H103KA01D MuRata
C45, C49, C61
C12 1 4700 pF CAP, CERM, 4700 pF, 50 V, 10%, X7R, 0603 0603 C0603X472K5RACTU Kemet
C16, C53, C70, 4 10 µF CAP, CERM, 10 µF, 16 V, 10%, X5R, 0805 0805 EMK212BJ106KG-T Taiyo Yuden
C81
C18, C23, C57, 4 22 pF CAP, CERM, 22 pF, 50 V, 5%, C0G/NP0, 0603 0603 GRM1885C1H220JA01D MuRata
C65
C19, C30, C58, 4 100 pF CAP, CERM, 100 pF, 50 V, 5%, C0G/NP0, 0603 0603 GRM1885C1H101JA01D MuRata
C64
C21, C34, C42, 4 470 µF CAP, AL, 470 µF, 63 V, 20%, 0.059 , TH D16xL20mm EEU-FC1J471 Panasonic
C56
C24, C35, C43, 4 1.0 µF CAP, Film, 1.0 µF, 250 V, 5%, TH 18x9x17.5mm PHE426HB7100JR06 Kemet Inc
C59
C25, C36, C44, 4 1000 pF CAP, CERM, 1000 pF, 50 V, 5%, C0G/NP0, 1206 1206 GRM3195C1H102JA01D MuRata
C60
C27, C29, C52, 4 0.033 µF CAP, CERM, 0.033 µF, 50 V, 10%, X7R, 0603 0603 GRM188R71H333KA61D MuRata
C54
C31, C46 2 3300 µF CAP, AL, 3300 µF, 50 V, 20%, TH D18xL35.5mm ECA-1HM332 Panasonic
C32, C33, C47, 6 1 µF CAP, CERM, 1 µF, 50 V, 10%, X7R, 1206 1206 GRM31MR71H105KA88L MuRata
C48, C83, C84
12 TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Board Layouts, Bill of Materials, and Schematic
Table 4. Bill of Materials (continued)
Package
Designator Qty Value Description Part Number Manufacturer
Reference
C38 1 4.7 µF CAP, CERM, 4.7 µF, 25 V, 10%, X7R, 1206 1206 GRM31CR71E475KA88L MuRata
C39 1 47 µF CAP, AL, 47 µF, 50 V, 20%, 0.3 , SMD SMT Radial G EEE-FC1H470P Panasonic
C40, C41 2 1 µF CAP, CERM, 1 µF, 16 V, 10%, X7R, 0603 0603 GRM188R71C105KA12D MuRata
C68 1 0.1 µF CAP, CERM, 0.1 µF, 50 V, 10%, X7R, 0603 0603 C0603C104K5RACTU Kemet
D1 1 100 V Diode, Schottky, 100 V, 1 A, SMA SMA B1100-13-F Diodes Inc.
D2 1 Orange LED, Orange, SMD LED_0805 LTST-C170KFKT Lite-On
D3 1 100 V Diode, Schottky, 100 V, 3 A, SMA SMA SK310A-TP Micro Commercial
Components
D4 1 Red LED, Red, SMD LED_0805 LTST-C170KRKT Lite-On
D5 1 Green LED, Green, SMD LED_0805 LTST-C170KGKT Lite-On
H1, H2, H3, H4, 5 M3x5 mm MACHINE SCREW PAN PHILLIPS M3 5 mm Screw M3 Phillips MPMS 003 0005 PH B&F Fastener Supply
H5 head
H6, H7, H8, H9, 5 M3 Standoff, Hex, 25 mm Length, M3, Aluminum Standoff M3 24438 Keystone
H10
J1, J2, J9 3 Dual Binding Posts with Base, 2x1, TH Dual Binding 6883 Pomona Electronics
Posts with Base,
2x1, TH
J3 1 RCA Jack, Red, R/A, TH PC Mount Phono 971 Keystone
Jack-Red, TH
J4, J5, J6, J19 4 1x3 Header, 100 mil, 3x1, Gold, TH PBC03SAAN PBC03SAAN Sullins Connector Solutions
J7, J8, J21 3 Header, 100 mil, 2x1, Gold, TH Sullins 100mil, PBC02SAAN Sullins Connector Solutions
1x2, 230 mil above
insulator
J10, J12 2 Header, 2.54 mm, 3x1, TH Header, 2.54mm, 22-11-2032 Molex
3x1, TH
J11, J20 2 Binding Post, BLACK, TH 11.4x27.2mm 7007 Keystone
J14 1 RCA Jack, Yellow, R/A, TH RCA Jack, Yellow, 973 Keystone
R/A, TH
J15 1 RCA Jack, Black, R/A, TH RCA Jack, Black, 972 Keystone
R/A, TH
J16 1 Header, 100mil, 4x2, Tin, TH Header, 4x2, PEC04DAAN Sullins Connector Solutions
100mil, Tin
J17 1 Header (friction lock), 100 mil, 4x1, Gold, TH Header 4x1 keyed 0022112042 Molex
J18 1 RCA Jack, White, R/A, TH PC Mount Phono 970 Keystone
Jack-White, TH
J22, J23, J24, J25 4 JUMPER TIN SMD 6.85x0.97x2.51 S1911-46R Harwin
mm
13
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

Board Layouts, Bill of Materials, and Schematic www.ti.com
Table 4. Bill of Materials (continued)
Package
Designator Qty Value Description Part Number Manufacturer
Reference
L1 1 100uH Inductor, Shielded Drum Core, Ferrite, 100 µH, 1.5 A, 10x5x10mm 7447714101 Wurth Elektronik eiSos
0.165 , SMD
L2, L3, L4, L5 4 10 uH Inductor, Toroid, Powdered Iron, 10 µH, 5 A, 0.030 , TH 28.6x12.3mm MA5172-AE Coilcraft
L6 1 10 uH Inductor, Wirewound, 10 µH, 0.8 A, 0.204 , SMD 2-Pin SMD, Body NRS4012T100MDGJV Taiyo Yuden
4 x 4 mm, Height
1.2 mm
Q1, Q2 2 60 V MOSFET, N-CH, 60 V, 0.17 A, SOT-23 SOT-23 2N7002-7-F Diodes Inc.
R1, R3, R4, R12, 7 0 RES, 0, 5%, 0.1 W, 0603 0603 CRCW06030000Z0EA Vishay-Dale
R30, R44, R46
R2 1 182 k RES, 182 k, 1%, 0.125 W, 0805 0805 ERJ-6ENF1823V Panasonic
R5, R10, R19, 6 100 RES, 100, 1%, 0.1 W, 0603 0603 CRCW0603100RFKEA Vishay-Dale
R23, R33, R35
R6, R11, R14, 5 3.3 RES, 3.3, 5%, 0.1 W, 0603 0603 CRCW06033R30JNEA Vishay-Dale
R18, R22
R7, R8, R20, R21, 10 10.0 k RES, 10.0 k, 0.1%, 0.1 W, 0603 0603 RT0603BRD0710KL Yageo America
R25, R27, R37,
R38, R41, R42
R9, R43, R45, 5 100 k RES, 100 k, 1%, 0.063 W, 0402 0402 CRCW0402100KFKED Vishay-Dale
R48, R61
R13 1 22.0 k RES, 22.0 k, 1%, 0.1 W, 0603 0603 RC0603FR-0722KL Yageo America
R15, R36, R52 3 10.0 k RES, 10.0 k, 1%, 0.1 W, 0603 0603 CRCW060310K0FKEA Vishay-Dale
R16 1 20.0 k RES, 20.0 k, 1%, 0.1 W, 0603 0603 RC0603FR-0720KL Yageo America
R17 1 30.0 k RES, 30.0 k, 1%, 0.1 W, 0603 0603 RC0603FR-0730KL Yageo America
R24, R28 2 47 k RES, 47 k, 5%, 0.1 W, 0603 0603 RC0603JR-0747KL Yageo America
R26 1 3.30 k RES, 3.30 k, 1%, 0.1 W, 0603 0603 RC0603FR-073K3L Yageo America
R29, R31 2 1.00 k RES, 1.00 k, 1%, 0.1 W, 0603 0603 CRCW06031K00FKEA Vishay-Dale
R32 1 12.0 k RES, 12.0 k, 1%, 0.1 W, 0603 0603 ERJ-3EKF1202V Panasonic
R39 1 4.99 k RES, 4.99 k, 1%, 0.063 W, 0402 0402 CRCW04024K99FKED Vishay-Dale
R40 1 1.00 k RES, 1.00 k, 1%, 0.063 W, 0402 0402 CRCW04021K00FKED Vishay-Dale
R53 1 499 RES, 499, 1%, 0.1 W, 0603 0603 CRCW0603499RFKEA Vishay-Dale
S1 1 Switch, SPDT, On-On, 1 Pos, 0.4 VA, 20 V, TH 7.01x4.5 mm GT11MCBE C&K Components
SH1, SH2, SH3, 6 1x2 Shunt, 100 mil, Gold plated, Black Shunt 969102-0000-DA 3M
SH4, SH5, SH6
U1 1 50-W Stereo, 175-W peak PurePath Ultra-HD Pad Down DDW0044A TPA3250D2DDWR Texas Instruments
Class-D Amplifier, DDW0044A
U2 1 High Voltage 1 A Step Down Switching Regulator, 10-pin SDC10A LM5010ASD/NOPB Texas Instruments
LLP, Pb-Free
14 TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

www.ti.com Board Layouts, Bill of Materials, and Schematic
Table 4. Bill of Materials (continued)
Package
Designator Qty Value Description Part Number Manufacturer
Reference
U3 1 1 A Low Dropout Regulator, 4-pin SOT-223, Pb-Free MP04A LM2940IMP-12/NOPB Texas Instruments
U4 1 FIXED LOW-DROPOUT VOLTAGE REGULATOR, DCY0003A TLV1117-33IDCY Texas Instruments
DCY0003A
U5, U6 2 Dual Low-Noise Operational Amplifier, 10 to 30 V, 0 to 70 D0008A NE5532ADR Texas Instruments
degC, 8-pin SOIC (D0008A), Green (RoHS & no Sb/Br)
U7 1 ULTRA-SMALL SUPPLY VOLTAGE SUPERVISORS, DCK0005A TPS3802K33DCKR Texas Instruments
DCK0005A
C73, C74, C75, 0 22 pF CAP, CERM, 22 pF, 50 V, 5%, C0G/NP0, 0603 0603 GRM1885C1H220JA01D MuRata
C76
C77, C78, C79, 0 1 µF CAP, CERM, 1 µF, 50 V, 10%, X7R, 1206 1206 GRM31MR71H105KA88L MuRata
C80
FID1, FID2, FID3, 0 Fiducial mark. There is nothing to buy or mount. Fiducial N/A N/A
FID4, FID5, FID6
J13 0 Header, 100mil, 2x1, Gold, TH Sullins 100mil, PBC02SAAN Sullins Connector Solutions
1x2, 230 mil above
insulator
R34, R58, R59, 0 0 RES, 0, 5%, 0.1 W, 0603 0603 CRCW06030000Z0EA Vishay-Dale
R60
R47, R49, R50, 0 10.0 k RES, 10.0 k, 1%, 0.1 W, 0603 0603 CRCW060310K0FKEA Vishay-Dale
R51
R54, R55, R56, 0 3.3 RES, 3.3, 5%, 0.75 W, 2010 2010 CRCW20103R30JNEF Vishay-Dale
R57
TP1, TP2, TP3, 0 Grey Test Point, Multipurpose, Grey, TH Grey Multipurpose 5128 Keystone
TP4, TP5, TP6, Testpoint
TP7, TP8, TP9,
TP10, TP11,
TP12, TP13, TP14
15
SLVUAM9–December 2015 TPA3250D2EVM
Submit Documentation Feedback Copyright © 2015, Texas Instruments Incorporated

PVDD
GND
RESET
Red
D4
FAULT
Q2
+12V
GND GND
Orange
D2
OTW
+12V
GND GND
CLIP_OTW
MONITORS
100
R33
100
R35
FAULT
1.0µF
C24
GND
1000pF
C25
GND
1.0µF
C35
GND GND
1.0µF
C43
GND GND
1.0µF
C59
GND GND
GND
PVDD
GND
GND
PVDD
OUT_A
OUT_B
OUT_C
0.033µF
C27
GND
1µF
C32
GND
GNDGND
0.033µF
C29
0.033µF
C52
0.033µF
C54
RESET
VBG
J21
GND
0.01µF
C49
GND GND
1µFC40
0.1uF
C14
GND
0
R3 GVDD_AB
0.1uF
C22
+12V
3.3
R6
GND
1
2
3
J6
+3.3V
1
2
3
J5
+3.3V
M1
M2
GND
GND
M1
M2
+12V
+12V-OA
GND
10.0k
R37
10.0k
R38
VMID
GND
INPUT_D
INPUT_C
INPUT_A
INPUT_B
1
2
3
48
U6A
NE5532ADR
5
6
7
48
U6B
NE5532ADR
10.0k
R27
10.0k
R20
10.0k
R21
VMID
+12V-OA
0.1uF
C51
GND GND
10µF
C53
GND 10.0k
R25
INPUT_B
INPUT_A
GND
+3.3V
SLAVE MODE
10.0kR15
20.0k
R16
30.0k
R17
MASTER MODE
MASTER MODE AM1
MASTER MODE AM2
GND
FREQUENCY
22.0k
R13
ADJUST
OUT_D
C_START
INPUT_D
INPUT_C
47k
R24 1.00k
R29
1.00k
R31
0.1µF
C68
GND
IN
1OUT 3
GND 2 TAB
4
U3
LM2940IMP-12/NOPB
OUT 2
GND
1
IN
3
PAD 4
U4
TLV1117-33IDCY
PVDD
GND
0.1uF
C2
GND GND
0.01µF
C11
1µF
C3 100uH 1.5A
L1
D1
100V/1A
2.2µF
C4 0.047µF
C1
0.1uF
C13
GND
4700p F
C12
182k
R2
5600p F
C7
+15V
0.47µF
C8
0.1uF
C9
GND GND
GND
GND
GND
+12V
47µF
C5
10µF
C6
+3.3V
GND
GND
GND
100µF
C10
10µF
C70
MODE PIN SELECTION
M2 M1
0
1
0
1
0
1
0
1
INPUT MODE OUTPUT DESCRIPTION
2N + 1
2N/1N + 1
2N + 1
1N + 1
2xBTL
1xBTL + 2xSE
1xPBTL
4xSE
STEREO BTL OUTPUT, AD MODE
2.1 BTL + SE MODE, AD MODE
PARALLEL BTL OUTPUT, AD MODE
SINGLE ENDED OUTPUT, AD MODE
22pF
C65
22pF
C57
VMID
+3.3V
IN = SE
OUT = BTL
1µF
C33
1µF
C47
1µF
C48
1000pF
C36
1000pF
C44
1000pF
C60
Black
J20
GNDAB
4.7µF
C38
4.99k
R39
1.00k
R40
GND
GND
47µF
C39
OUT_A
OUT_B
OUT_C
OUT_D
OUTA
OUTB
OUTC
OUTD
Black
J11
GNDCD
12
34
56
78
J16
1
2
3
J19
SE
DIFF
0.1uF
C72
GND
GND
1
2
3
48
U5A
NE5532ADR
5
6
7
48
U5B
NE5532ADR
10.0k
R42
10.0k
R7
10.0k
R8
VMID
+12V-OA
0.1uF
C15
GND GND
10µF
C16
GND 10.0k
R41
22pF
C23
22pF
C18
VMID
1
2
3
J4
SE
DIFF
100k
R9
GND
100k
R43
GND
100k
R45
GND
100k
R48
22pF
C73
DNP
DNP
10.0k
R47
DNP
DNP
0
R4
0
R12
0
R44
0
R46
22pF
C74
DNP
DNP
22pF
C75
DNP
DNP
22pF
C76
DNP
DNP
OUTD
OUTC
OUTB
OUTA
OA
OB
OC
OD
+12V
GND
GND
499
R53
+3.3V
GND
Green
D5
10µF
C20
10µF
C71
10µF
C62
10µF
C66
GND
1µF
C77
DNP
DNP 3.3
R54
DNP
DNP
GND GND GND GND
1
2
3
J10
4
3
1
J3
IND/CD
4
3
1
J14
INC
4
3
1
J15
INA
1
2
3
J12
1µF
C78
DNP
DNP
1µF
C79
DNP
DNP
1µF
C80
DNP
DNP
TP13
RESETz DNP
TP14 FAULTz
DNP
TP1 CLIP_OTWz
DNP
TP6
GND
DNP
TP2
PWMA
DNP
TP7
PWMC
DNP
TP5
PWMB
DNP
TP9
PWMD
DNP
TP4 PVDD-AB
DNP
TP8 PVDD-CD
DNP TP3
OUTA DNP
TP10
OUTB DNP
TP11
OUTC DNP
TP12
OUTD DNP
Hi Current Shunt
D3
INPUT SE B
SE AB
DIFF B+
INPUT SE A
DIFF B-
INPUT SE D
SE CD
DIFF D+
INPUT SE C
DIFF D-
GND
0.1uF
C67
GND
0.1uF
C82
J13
DNP
DNP
FAULT
4
3
1
J18
INB/AB
0
R30
10µF
C17
10µF
C28
10µF
C55
10µF
C63
12.0k
R32
3.30k
R26
GND
+15V
GND
0
R34
DNP
DNP
0
R58
DNP
DNP
0
R59
DNP
DNP
0
R60
DNP
DNP
GND
GND
10uH 5A
L3
MA5172
PVDD
100k
R61
0.1uF
C69
GND
GVDD_CD
+12V
0
R1
1µF
C83
1µF
C84
GND
VDD
GVDD_AB
VDD
GVDD_CD
+3.3V
FAULT
CLIP_OTW
GND
OSCILLATOR
SYNC
INTERFACE
4
1
2
3
J17
0.47µF
C50
47k
R28
J7
J8
GND
10.0k
R36
10.0k
R52
MODE
SELECTION
IN=PBTL
OUT=BTL/SE
10.0k
R49
DNP
DNP
10.0k
R50
DNP
DNP
10.0k
R51
DNP
DNP
GND 1
GND 2 MR
5
RESET 3 VDD
4
U7
TPS3802K33DCKR
GND
470µF
C21
470µF
C34
470µF
C42
470µF
C56
GND
10µF
C81
J22
Hi Current Shunt
J23
Hi Current Shunt
J24
Hi Current Shunt
J25
J9
J2
VCC 9
SS
7
SW 1
FB 6 RTN
5
VIN
10
BST 2
RON/SD
8
DAP 11
ISEN 3
SGND
4
U2
LM5010ASD/NOPB
10uH 0.8A
L6
J1
3.3
R55
DNP
DNP 3.3
R56
DNP
DNP 3.3
R57
DNP
DNP
Q1
1µF
C41
TP26
FREQ_ADJ
DNP
TP25
M1
DNP
TP24
OC-ADJ
DNP
TP20
INA
DNP
TP21
INB
DNP
TP22
INC
DNP
TP23
IND
DNP
TP18
DVDD
DNP
TP19
AVDD
DNP
TP15
GVDD-AB
DNP
TP16
VDD
DNP
TP17
GVDD-CD
DNP
TP27
VBG
DNP
GND
100pF
C64
100
R23
GND
100pF
C19
100
R5
GND
100pF
C30
100
R10
GND
100pF
C58
100
R19
GND
GND
GND
GND
GND
3.3
R11
0.01µF
C26
3.3
R22
0.01µF
C61
3.3
R14
0.01µF
C37
3.3
R18
0.01µF
C45
IOP
IOM
TP28
M2
DNP
MR MR
MR
FREQ_ADJ
VDD-RESET
GVDD_AB
22
VDD
21
M1
20
M2
19
INPUT_A
18
INPUT_B
17
OC_ADJ
16
FREQ_ADJ
15
OSC_IOM
14 OSC_IOP
13
DVDD
12
GND 11
GND 10
AVDD
9
C_START
8
INPUT_C
7
INPUT_D
6
RESET
5
FAULT 4
VBG 3
CLIP_OTW 2
GVDD_CD
1
BST_A 23
BST_B 24
BST_D 44
BST_C 43
GND 25
GND 26
GND 42
GND 41
GND 33
GND 34
OUT_A 27
OUT_A 28
OUT_B 32
OUT_C 35
OUT_D 40
OUT_D 39
PVDD_AB
29
PVDD_AB
30
PVDD_AB
31
PVDD_CD
36
PVDD_CD
37
PVDD_CD
38
PowerPAD 45
U1
TPA3250D2DDWR
10uH 5A
L2
MA5172
10uH 5A
L4
MA5172
10uH 5A
L5
MA5172
3300µF
C31
3300µF
C46
2
1
3
4 5
S1 RESET
GND
GND
Board Layouts, Bill of Materials, and Schematic www.ti.com
4.4 TPA3250D2EVM Schematic
The schematic for TPA3250D2EVM is illustrated in Figure 6.
Figure 6. TPA3250D2EVM Schematic
16 TPA3250D2EVM SLVUAM9–December 2015
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated

IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2015, Texas Instruments Incorporated

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Texas Instruments:
TPA3250D2EVM