Texsport 01111 User manual

INSTRUCTIONS
Item 01111
Meadow Breeze Screen Porch Tent
Thank you for purchasing this Texsport tent. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent
at least once prior to your camping trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new
tent and that it will give you many years of camping pleasure.
Do not apply excessive force to this product.
PAR S LIS :
A......ent skin
B......3 Sets of tent poles taped with black
C......2 Sets of window arch poles taped
with red
D......1 Porch roof pole taped with blue
E......2 Sets of porch legs
F......Stakes, guy ropes and clews.
NO E:
Prepare your camp site by removing all sharp stones,
twigs, etc. he site should be flat and have no depres-
sions that could collect rain water.
A
B
C
D
E
F
S EP 1 - Spread out tent skin. S EP 2 - Assemble the red taped
tent poles (C) and insert through
the window arch tent sleeves.
S EP 3 - Your poles should form
an X as shown above.
S EP 5 - Insert the other end of
the pole (B) into the attached
center hub.
S EP 4 - Assemble the black
taped tent poles (B) and insert
through back center sleeve.
S EP 6 - Repeat step 4 for the
side/roof sleeves.
S EP 7 - Insert the side/roof
poles (B) into the center hub.
S EP 8 - his is how your poles
should look.
S EP 9 - Insert the pin and ring
into the red taped pole (C) on
the side of the tent skin first.
hen repeat with the black
taped pole (B).

S EP 10 - hen insert the pin
and ring into the other end of
the red taped pole (C) at the
rear of the tent skin.
S EP 11 - Repeat steps 8 and 9
for the other red and black
taped poles (B & C). he poles
should overlap each other as
shown above at the ring.
S EP 13 - Stake down all rings
around the sides and rear of
the tent.
S EP 12 - Attach speed clips to
pole frame.
S EP 14 - Stake out the side
doors of the tent with the tabs
provided.
S EP 15 - his is what your tent
should look like so far.
S EP 16 - Assemble the blue
taped tent poles (D) and insert
through the porch arch sleeve.
S EP 17 - Insert into the small
opening of theattached molded
corner joint.
S EP 18 - Assemble the porch
legs (E) and insert into the open
end of theattached molded cor-
ner joint.
SEP 19 - Insert the pin and
ring of the porch skin into the
porch leg poles.
S EP 20 - Attach speed clips to
porch legs.
S EP 21 - Stake down at the
rings on both sides.
SEP 22 - Stake porch down
with the tabs provided.
SEP 23 - his is what your
porch should look like.
SEP 24 - Drape the fly over the
tent and secure by attaching
the hooks onto the pin and
ring.

S EP 25 - Secure fly by attach-
ing the velcro to the frame.
S EP 26 - his is what your tent
should look like.
S EP 27 - It is recommended in
windy weather to secure your
tent with guy ropes. Insert the
guy rope into clew as shown
above.
SEP 28 - ie the other end of
the guy rope to the tabs on the
fly.
SEP 29 - Loosen the guy rope
as shown to wrap around a
stake.
S EP 30 - Stake down the guy
rope.
S EP 31 - Adjust the tension on
the guy rope by sliding the clew
up or down.