The box Pyrit 10A User manual

Pyrit 10A, 12A, 15A
active 2 way
full-range speaker
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
23.01.2013

Table of contents
1 General notes............................................................................................................................................... 4
2 Safety instructions..................................................................................................................................... 7
3 Features....................................................................................................................................................... 12
4 Installation.................................................................................................................................................. 13
4.1 Tips on handling speakers............................................................................................................ 15
4.2 Speaker rigging................................................................................................................................. 16
4.3 Pin assignment.................................................................................................................................. 16
5 Connections and operating elements........................................................................................... 20
6 Technical specifications....................................................................................................................... 26
7 Protecting the environment.............................................................................................................. 28
Table of contents
Pyrit 10A, 12A, 15A
3

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
General notes
active 2 way full-range speaker
4

This section provides an overview of the symbols and signal words used in this user manual.
Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
CAUTION! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in minor injury if it is not avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
Symbols and signal words
General notes
Pyrit 10A, 12A, 15A
5

Warning signs Type of danger
Warning – high-voltage.
Warning – suspended load.
Warning – danger zone.
General notes
active 2 way full-range speaker
6

2 Safety instructions
This device is intended to be used in a sound reinforcement system. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
Pyrit 10A, 12A, 15A
7

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
active 2 way full-range speaker
8

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use suffi‐
cient ear protectors.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the device, at least two persons are required for trans‐
port and installation.
Safety instructions
Pyrit 10A, 12A, 15A
9

NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
active 2 way full-range speaker
10

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
Pyrit 10A, 12A, 15A
11

3 Features
The device is particularly suitable for use in churches, conference rooms and multi-purpose
halls.
Special features of the device:
nItem no. 299659: 10" woofer, 1.4" tweeter
Item no. 299658: 12" woofer, 1.7" tweeter
Item no. 299657: 15" woofer, 1.7" tweeter
nClass-D amplifier
nIntegrated sound processor (DSP) with 3 modes (Music, Flat, Low Cut)
nConnection options: XLR / 1/4" combo sockets for signal input, XLR mounting connectors
for signal outputs
nM8 rigging points
nBuilt-in feet for monitor applications
nDouble pole mounting flange (vertical and 5° inclination)
nCeiling mountable (with optional mounting bracket)
nPowder-coated front grille
Features
active 2 way full-range speaker
12

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the device against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
You can install the device on the wall, ceiling or floor.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Installation
Pyrit 10A, 12A, 15A
13

WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
CAUTION!
Risk of injury due to heavy weight
Due to the heavy weight of the device, at least two persons are required for trans‐
port and installation.
NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate
distance to devices that can be adversely affected or damaged by an external
magnetic field.
Installation
active 2 way full-range speaker
14

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
4.1 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals can reach the audi‐
ence unobstructedly. It will often be helpful to mount the speakers on tripods. Thus, the sound
will be evenly spread with maximum range throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won't reach max‐
imum sound quality.
If you notice distortion during operation, the active speaker is overloaded. This may perma‐
nently damage the device. Always reduce the volume as soon as you hear distortion.
Installation
Pyrit 10A, 12A, 15A
15

4.2 Speaker rigging
For rigging the speaker box on special mounting devices, M8 threads are flush-mounted on
top, bottom and sides of the box. You can insert screw eyes (double studs) into these threads.
Check for secure connection of the screw eyes to the box, before rigging the box.
4.3 Pin assignment
You can use XLR and 1/4" plugs with balanced or unbalanced wiring. In the following, we will
give you an overview of the various options.
Installation
active 2 way full-range speaker
16

XLR mounting sockets serve as signal inputs, XLR mounting plugs serve as signal outputs.
Drawing and table indicate the XLR pin assignment.
Balanced wiring:
1 Ground, shielding
2 Positive signal (+)
3 Negative signal (–)
Unbalanced wiring:
1 Ground, shielding
2 Signal
3 Bridged to pin 1
XLR connections for signal in
and outputs
Installation
Pyrit 10A, 12A, 15A
17

Drawing and table indicate the pin assignment of 1/4" phone plugs.
Unbalanced wiring (TS phone plug):
1 Signal
2 Ground, shielding
Unbalanced wiring (TRS phone plug):
1 Signal
2, 3 Ground, shielding
Phone plugs for signal in and
outputs
Installation
active 2 way full-range speaker
18

Balanced wiring (TRS phone plug):
1 (Tip) Positive signal (+)
2 (Ring) Negative signal (–)
3 (Sleeve) Ground, shielding
Installation
Pyrit 10A, 12A, 15A
19

5 Connections and operating elements
Rear panel Pyrit 10A
Connections and operating elements
active 2 way full-range speaker
20