THE INSIDE Cabana Stool User manual

COMPONENTS
Cabana Stool
ASSEMBLY INSTRUCTIONS
FABRIC SLING
x 1
WOODEN FRAME
x 1
LIMITED WARRANTY All our items are returnable within 30 days and
guaranteed against defects in construction for one year.
NEED SOME HELP? For any questions contact us via your preferred method.
Mon-Fri 9AM-9PM: Call 909-323-0016 OR E-Mail [e-mail]
RETAINING RODS
x 2

Locate the loop on either end of
the fabric. Insert a retaining rod
into the loop until it is entirely
encased. Repeat for the other side.
STEP 1 - SET UP THE FABRIC SLING
Cabana Stool
ASSEMBLY INSTRUCTIONS

Locate the grooves on the
outside top of each leg.
Push the legs together and hold
the fabric sling flat in front
of you.
Take the upper left corner of
the fabric sling and insert it into
the right side groove. Slightly
push the sling through and then
push both the fabric and rod
together, so they are both caught
on the groove.
STEP 2 - INSERT FABRIC INTO FRAME
Cabana Stool
ASSEMBLY INSTRUCTIONS

1. Wrap the fabric sling over
the top of the frame towards the
other groove. Repeat Step 2 on
the other side.
2. After the fabric sling has
been inserted a short distance,
slowly push both sides at
the same time until the fabric
sits properly in the middle
of the gap in the frame.
N O T E :
Folding stool is rated for up
to 125 lbs (56kg). Do not stand
on the stool as it was not made
for that purpose.
STEP 3 - WRAP AROUND & FOLD
Cabana Stool
ASSEMBLY INSTRUCTIONS