THE INSIDE Regency Headboard User manual

Regency Headboard
COMPONENTS:
HARDWARE INCLUDED:
ASSEMBLY INSTRUCTIONS
LIMITED WARRANTY All our items are returnable within 30 days
and guaranteed against defects in construction for one year.
NEED SOME HELP? For any questions contact us via your preferred method.
Mon-Fri 9AM-9PM: Call 909-323-0016 OR E-Mail [e-mail]
1” X 1/4” BOLTS
(H3) x 4
5/8” X 5/16”
BOLTS
(H1) x 4
1 1/4”
WASHER
(H2) x 12
1/4” NUTS
(H4) x 4
Note: You will need a flat head screwdriver and a wrench for assembly.
(A) HEADBOARD
(B) HEADBOARD LEGS
x 2

Regency Headboard
1. Place (A) headboard face down on
a flat surface. Place (B) headboard
legs on the back of (A) headboard,
aligning the slots of the legs with
the holes of the headboard.
Note: Make sure the “Out” sticker on
each (B) headboard leg is facing the
correct way.
2. Attach (B) headboard legs to (A)
headboard using (H1) bolts and (H2)
washers. Tighten with a flat head
screwdriver.
STEP 1
ASSEMBLY INSTRUCTIONS

Regency Headboard
Attach the assembled headboard
to your bedframe using (H3) bolts,
(H2) washers and (H4) nuts.
Tighten with a flat head
screwdriver and wrench.
Note: The height of your headboard
can be adjusted by loosening
the (H1) bolts and shifting the (A)
headboard up or down.
STEP 2
ASSEMBLY INSTRUCTIONS