The Label Dispensers LD5000 User manual

02/03
TM
instructions
LD
5000/5100/7000
TM
START International
4270 Airborn Dr.
Addison, TX 75001, USA
Tel [phone]
Fax [phone]
[email protected]
www.startinternational.com
START Japan Corporation
1-26-14 Toshin-Cho
Itabashi-ku
Tokyo, Japan
Tel [phone]
Fax [phone]
[email protected]

7
2
CONTENTS
Read this user’s manual before use to ensure proper operation. Keep the manual on
hand for reference in case there is a problem.
Warranty Information .....................2
Features .........................................3
Notes ............................................3
Repair Policy ..................................3
Specifications .................................3
Set-up ............................................4
Operation/Adjustments ...................5
Maintenance ..................................6
Legend ...........................................6
Exploded View ...............................7
Start International warrants all parts on LD series label dispensers against defects in
design, materials and workmanship for a period of 360 days. Labor to replace
defective parts will be performed at no charge for the first 180 days after date of
purchase. Warranty does not cover transportation costs.
Our sole obligation under this warranty is limited to repair, replacement or credit of
the purchase price, at our option, for the machines listed above, which do not
perform properly the function for which they were designed.
Warranty repair is contingent upon our examination and determination that alleged
defects have not been caused by misuse, abuse, improper installation or application,
repair, alteration, accident or neglect in use, storage, transportation or handling.
The above warranty and remedy constitutes Start International’s sole liability
hereunder and are in lieu and exclusive of all other warranties and remedies
expressed, implied, or statutory, including, but not limited to, those of merchantability
and fitness for a particular purpose.
WARRANTY POLICY FOR LD SERIES LABEL DISPENSERS
EXPLODED VIEW

5
4
Using 5/32" (4mm) hex wrench, adjust reel holder arm to vertical.
Place the label roll on the 1" (25mm) reel hanger bar.
*If roll has 3" (76.2mm) core, use plastic spool*
Slide reel guide arm onto reel hanger bar to hold roll against reel holder arm to ensure
it is held straight.
(Hex wrench, reel guide arm and spool included.)
Thread the liner under the guide rod, between the hold down and the strip plate, then
back under the strip plate. Lay the liner across the slot in the take-up hub. Slide the lock
rod into the slot to secure the liner. Align shaft guide on guide rod with edge of liner to
keep material feeding straight.
Hold Down:
Using the upper thumbscrew on the side of the label dispenser, adjust the hold down for
tensioning.
For best results, labels should be pressed firmly against the strip plate. If labels are held
too tightly, they will cause excessive drag on the motor.
Photosensor:
The photosensor can be adjusted in any direction to accommodate virtually any label.
Loosening the lower thumbscrew allows the photosensor to swivel and sets the overhang
distance of the label over the strip plate. When the label is being fed the correct
distance, tighten the lower thumbscrew.
Loosen the two screws on the front of the sensor holder to align the photosensor with
the center of the label. If there are two or more labels across, align the photosensor
with the last label to be removed. When these two screws are tightened, the machine
is set.
Hold Down
Photosensor
Strip Plate
Guide Rod
Lock Rod
Take-up Hub
Reel Hanger Bar
Reel Holder Arm
Incorrect
Correct
Sensor sees beyond label
- Will not stop Sensor sees strip plate
- Will not feed
Sensor sees front edge of label
ADJUSTMENTS
SET-UP INSTRUCTIONS
Positioning of Photosensor

63
MAINTENANCE
Turn the Label Dispenser off when not in use. Remove liner material from take-up hub at
approximately 3" in diameter or if motor appears to be straining. Do not operate
machine without covers in place. Do not operate if inspection reveals a damaged
power or sensor cord.
• Will dispense butt-cut and die-cut material.
• Adjustable photosensor for pinpoint accuracy.
• Handled lock rod makes scrap removal easy.
• No tools required for adjustment.
• Keep strip plate free of adhesive build-up.
• Clean photosensor with compressed air or dry cloth.
• Do not drop the dispenser or subject it to heavy shock.
• Turn off machine when not in use.
Contact START INTERNATIONAL to determine nature of problem.
Furnish START with the following information:
1. Who the unit was purchased from.
2. Model number and serial number.
3. Date purchased (copy of invoice or packing slip required).
START will issue an RGA (Return Goods Authorization) for repair.
Return machine to START by UPS, insured and prepaid.
START will notify the customer if there is a repair charge.
A $25.00 evaluation charge will apply to all non-warranty repairs, which will be
applied to repair charge.
FEATURES
NOTES
REPAIR POLICY
Model# LD5000 LD5100 LD7000
Liner Capacity
Width .25" to 4.5" .25 to 4.5" .25 to 7.0"
(6.35mm to 115mm) (6.35mm to 115mm) (6.35 to 178mm)
Length .125" to 7" .25" to 7" .25" to 7"
(3.2mm to 178mm) (6.4mm to 178mm) (6.4mm to 178mm)
Roll Capacity 12" (30.5cm) 12" (30.5cm) 12" (30.5cm)
Feed Speed 1.3" / sec* 2.6” / sec* 2.6" / sec*
(3.3cm / sec.) (6.6cm / sec.) (6.6cm / sec.)
Dimensions
Inches 10.8 (L) x 10.8 (W) x 14.5 (H) 10.8 (L) x 10.8 (W) x 14.5 (H) 10.8 (L) x 13.2 (W) x 14.5 (H)
Centimeters 27.4 (L) x 27.4 (W) x 36.8 (H) 27.4 (L) x 27.4 (W) x 36.8 (H) 27.4 (L) x 33.5 (W) x 36.8 (H)
Weight 10.5 lb. (4.76 kg.) 10.5 lb. (4.76 kg.) 11.3 lb. (5.12 kg.)
Electrical 117V 50/60Hz, <1 amp
Requirements (220V 50/60Hz available)
SPECIFICATIONS:
*at start-up
LEGEND
Model LD5000 Model LD5100 Model LD7000
Item # Part # Part # Part#
1 LD50008-C LD50008-C LD50008-C
1A LD50008-1 LD50008-1 LD50008-1
1B LD50008-2 LD50008-2 LD50008-2
2 LD50010-C LD50010-C LD50010-C
2A LD50010-1 LD50010-1 LD50010-1
2B LD50010-2 LD50010-2 LD50010-2
3 LD50017-C LD50017-C LD70017-C
3A LD50017-1 LD50017-1 LD50017-1
4 LD50023-A LD50023-A LD50023-A
5 LD-SPOOL LD-SPOOL LD-SPOOL
6 LD50001A LD50001B-A LD50001B-A
6A LD50001-1 LD50001-1 LD50001-1
6B LD50018-2 LD50018-2 LD50018-2
7 LD50013B-A LD50013B-A LD70013B-A
8 LD50012C LD50012-C LD70012-C
8A LD50012-1 LD50012-1 LD50012-1
9 LD50014-1A LD50014-1A LD50014-1A
9A LD50014-4 LD50014-4 LD50014-4
10 LD50014-C LD50014-C LD70014-C
10A LD50017-1 LD50017-1 LD50017-1
11 LD50026D-B LD50026D-B LD70026D-B
11A LD50011-2 LD50011-2 LD50011-2
11B LD50026-1 LD50026-1 LD50026-1
12 LD50026C-A LD50026C-A LD70026C-A
13 LD50015C LD50015-C LD70015-C
13A LD50017-1 LD50017-1 LD50017-1
13B LD50015A LD50015A LD70015A
14 LD50011A LD50011A LD50011A
15 LD50002A LD50002A LD50002A
16 LD50011B-C LD50011B-C LD70011B-C
16A LD50011-2 LD50011-2 LD50011-2
16B LD50011-1 LD50011-1 LD50011-1
17 LD50007-C LD50007-C LD50007-C
18 LD50003 LD50003 LD50003
19 LD50009-D LD50009-D LD70009-D
19A LD50007-1 LD50007-1 LD50007-1
20 LD50021 LD50021 LD50021
20A LD50005-1 LD50005-1 LD50005-1
20B LD50021-1 LD50021-1 LD50021-1
21 LD50019 LD50019 LD50019
21A LD50019F-3 LD50019F-3 LD50019F-3
22 LD50018C LD50018C LD50018C
23 LD50005 LD50005 LD50005
23A LD50005-1 LD50005-1 LD50005-1
23B LD50021-1 LD50021-1 LD50021-1