The Land of Nod Topside Bunk Bed User manual

WARNING
!
STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed that are
not designed for use with the bed; for example, but not limited to, hooks, belts and jump ropes.
to the wall, the guardrail that runs the full length of the bed should be placed against the wall to
prevent entrapment between the bed and wall.
likelihood of entrapment or falls.
additional guardrails.
carton. Do not remove warning label from bed.
proper position, free from damage, and that all connectors are tight.
Do not allow more than one person on upper bunk at a time
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Made in Vietnam - r07
-3/4

The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 1 of 10
Made in Vietnam - r07
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
e hgfdcba
x 06 x 20 x 12x 02 x 12 x 03 x 03 x 02x 24
x 16 x 16 x 06 x 16 x 06 x 16 x 04 x 16
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
x 01
x 01
NOT INCLUDED
x 01
NOT INCLUDED
x 01
j l qpnmki

The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 2 of 10
Made in Vietnam - r07
x 01 x 01
x 02 x 01 x 01
x 01 x 01x 01x 01
x 01 x 06x 01x 01 x 03 x 03
x 01 x 02
B CA

1
2
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 3 of 10
Made in Vietnam - r07
j
j

3
4
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 4 of 10
Made in Vietnam - r07
OR
LADDER ON LEFT SIDE LADDER ON RIGHT SIDE
f
h
f
h

5
6
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 5 of 10
Made in Vietnam - r07
j
g
ce
db
a
db
aNOTE: Loosely attach
bolts and do not fully
tighten until further
instructions.
NOTE: Loosely attach
hex nuts and do not
fully tighten until
further instructions.

7
8
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 6 of 10
Made in Vietnam - r07
NOTE: Fit ONLY the threaded bolts
of end panel into corresponding
holes of assembly. Do not fit
wood dowels or fasten with
any hardware until further
instructions.
NOTE: Carefully fit remaining
side rail panel onto corresponding
threaded bolts of assembly. At this
point, push all panels into each
other to make sure all threaded
bolts and wood dowels are fully
engaged.

9
10
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 7 of 10
Made in Vietnam - r07
i
j
a
d
b
NOTE: Fully tighten
all bolts.
NOTE: Fully tighten
all hex nuts.
g
ce

12
11
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 8 of 10
Made in Vietnam - r07
l
l
l
l
B
C
A
p
q
q
p
q
p
i
kce

14
13
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 9 of 10
Made in Vietnam - r07
B
C
A
m
m
m
m
BB
B

15
CLEANINGANDCARE:
Cleansurfaceswithadryordampsoftcloth.Donotuseabrasivecleaners. Periodically check and tighten hardware as necessary.
Once the bunk bed is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep
these instructions for future use.
MAINTENANCE
Upon completion of assembly, be sure all screws, bolts and fastening devices have been tightened securely.
Periodically repeat this check to make sure all screws, bolts and fastening devices are tight. Before each usage or
assembly, inspect bunk bed for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use bunk
bed if parts are missing or broken. DO NOT substitute parts. DO NOT make any alteration to this bunk bed.
CLEANING
Mix together a mild solution of gentle dishwashing liquid and water, apply to bunk bed surface using a soft clean
cloth lightly dampened in the solution. Rinse with clean water again using a soft clean cloth, then dry all surfaces
thoroughly with a soft dry cloth. NO ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COARSE RAGS
SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
STORAGE
After completing the assembly process you are advised to read and beware of all WARNINGS, CAUTIONS,
CLEANING, STORAGE, USE AND MAINTENANCE notices contained in these instructions. For long term storage of
the bunk bed, store in a cool, dry place and keep away from moisture and extreme temperature changes.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Topside Bunk Bed Assembly Instructions
Page 10 of 10
Made in Vietnam - r07
n