The Land of Nod Street Vendor Cart User manual

The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Street Vendor Cart Assembly Instructions
Page 1 of 5
Made in Taiwan - r04
This page lists the contents included in the box. Please take
time to identify the hardware as well as the individual
components of the product. As you unpack and prepare for
assembly, place the contents on a carpeted or padded area
to protect them from damage. Please follow the assembly
instructions closely. Improper assembly can result in
personal or property damage.
Note: 2 adults are required to safely assemble this product.
24 - Small
bolts
2 - Large
bolts
2 - Hex
nuts
2 - Wheel
caps
4 - End
caps
2 - Flat
washers
WARNING:
CHOKING HAZARD - SMALL PARTS
Small parts present in unassembled state.
Adult assembly required.
1- Large
Allen wrench
1 - Small
Allen wrench
1 - Hex
wrench

The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Street Vendor Cart Assembly Instructions
Page 2 of 5
Made in Taiwan - r04
1 - Right
frame
3- Large
poles
1 - Awning 2 - Wheels5 - Small
poles
1 - Left
frame
1 - Shelf
frame
1 - Bottom
frame
MIND READING BOOK MOBILE ICE CREAM !
FARMER'S MARKET
4 - Reversible signs

1
2Fit shelf frame and bottom frame into frame assembly as shown, and secure with 8 small bolts. Insert 4 end caps to
bottom of assembly as shown. Press firmly to secure.
Attach 5 small poles and 3 large poles to left side frame with 8 small bolts as shown. Secure, but do not over tighten,
bolts with a small Allen wrench. At this point, attach right side frame to frame assembly with 8 small bolts.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Street Vendor Cart Assembly Instructions
Page 3 of 5
Made in Taiwan - r04

3
4Insert large bolt of wheel into corresponding hole of left side frame of frame assembly as shown. Secure bolt using a
large Allen wrench. Repeat steps for remaining wheel.
Insert 1 large bolt into 1 wheel as shown. On the other side of the wheel, thread 1 flat washer and 1 hex nut onto the
large bolt. Using the large Allen wrench, hold the large bolt in position and fasten hex nut with a Hex wrench.
Repeat steps for remaining wheel.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Street Vendor Cart Assembly Instructions
Page 4 of 5
Made in Taiwan - r04
detail on the
other side of
the tire

5
6Attach 4 signs onto frame assembly using Hook and Loop fasteners to secure. Fit awning over top of frame assembly.
Assembly is now complete. Fit wheel cap over wheel as shown.
Fit wheel cap over each wheel as shown. Press firmly to secure.
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: [phone] • e: [email protected] • www.landofnod.com
Street Vendor Cart Assembly Instructions
Page 5 of 5
Made in Taiwan - r04
BOOK MOBILE
FARMER'S MARKET
MIND READING
ICE CREAM !
awning
sign
NOTE: Signs are reversible