The Mandir Store MWD-08-117-301-442416 User manual

Not to scale
Assembly Guide #02
Page of1 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
Scan the QR for the digital
This guide works for the following SKUs
MWD-08-117-301-442416
MWD-14-108-345-573018
MWD-08-108-348-573018

Not to scale
Assembly Guide #02
Page of2 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
Step 1: Assemble the inner drawer(s)!
!
!
handle screw
minifix
pull handle
philips screw driver
x2
x8
x1
x1 | not included
Gather the required planks K, L, M, N, O and P to assemble the inner drawer
Required hardware is shown below!

Not to scale
Assembly Guide #02
Page of3 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
1.a. screw 8 mini fixes into the pre-drilled holes on planks K, Mand O↓
1.b. attach side panels Kand Magainst rear panel Land tighten CAM(s) to secure ↓

Not to scale
Assembly Guide #02
Page of4 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
1.c. slide the drawer base panel Nalong the routed lines ↓
1.d. secure one handle Son the drawer plank Ousing the provided screws ↓

Not to scale
Assembly Guide #02
Page of5 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
1.e. attach the drawer front Oon the drawer structure and tighten the CAMs to secure ↓
1.f. simply rest platform extension plank Pon the drawer box ↓

Not to scale
Assembly Guide #02
Page of6 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
Gather the required planks F, G, H, I and Jto assemble base storage structure
Step 2: Assemble the base structure
Required hardware is shown below!
leg screw
minifix
philips screw driver
x16 | optional
x16
x1 | not included

Not to scale
Assembly Guide #02
Page of7 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
2.a. (optional) you may choose to replace the rubber legs with SS legs on base plank F↓
2.b. screw 4 mini fixes into the pre-drilled holes on parts G and I↓

Not to scale
Assembly Guide #02
Page of8 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
2.c. attach side Gto rear plank H, tighten CAM(s) to secure in place ↓
2.d. attach side plank Ito the above assembled structure, tighten CAM(s) to secure it ↓

Not to scale
Assembly Guide #02
Page of9 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
2.e. screw 12 mini fixes into the pre-drilled holes on planks F and J↓
2.f. place base plank Fonto the assembled structure, tighten CAM(s) to secure it↓

Not to scale
Assembly Guide #02
Page of10 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
2.g. flip the assembled structure and place plank Jon it, tighten CAM(s) to secure it↓
2.h. gently pull the inner slides from the base structure and slide the drawer box on them ↓

Not to scale
Assembly Guide #02
Page of11 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
Step 3: Affix the back panel to the base structure
Gather the required hardware, back panel Aand the fully assembled base structure
Required hardware is shown below
hex bolt
hex key / allen key
x5
x1

Not to scale
Assembly Guide #02
Page of12 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
3.a. align the holes at the back of the panel Awith the holes at the back of the base structure,
then secure the panel in place using the hex bolts provided using the hex key provided along
with the mandir. !
Note: Be sure to align all the bolts using your fingers before fastening any one of the bolts
completely.

Not to scale
Assembly Guide #02
Page of13 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
Step 4: Affix the hood and decorate the mandir!
Gather the below shown parts to finish decorating your mandir. The Jharoka hanger design (part C)
may vary based on your mandir design but the same assembly instructions apply"
"
Required hardware is shown below
hex bolt
hex key / allen key
hanger screw
philips screw
driver
S hook
x2
x1
x6+
x1 | not included
x4+

Not to scale
Assembly Guide #02
Page of14 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
4.a. slide the jharoka hanger onto the placeholder tiles and fasten the screws to secure ↓
4.b. repeat the same for the other jharoka hanger side pieces ↓

Not to scale
Assembly Guide #02
Page of15 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
4.c. using the hex bolts and hex key secure the hood onto the back panel."
Note: Make sure the hood is completely flush against the back panel and there are no visible
gaps where the hood and the panel meet.

Not to scale
Assembly Guide #02
Page of16 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
4.d. simply push the center element against the placeholder bullets on the back panel ↓
4.e. identify the single slot and double slot pillars and place them against the edges of the
base. Once the pillars are laid out, peel the double sided tape on the bottom of the pillar to
stick the pillar onto the mandir base. Then slide the longer fences into the provided slots ↓

Not to scale
Assembly Guide #02
Page of17 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
4.f. slide the smaller fences perpendicular to the longer fence into the other end of the front
pillars. Then slide the remaining 2 pillars in place and before sticking them to the base,
ensure that they are equidistant from both ends of the base. ↓
4.g. use the ’S’ hooks to hang the latkans and brass bells onto the jharoka hanger ↓

Not to scale
Assembly Guide #02
Page of18 18
Not to scale
v2.0
!
© 2022. The Mandir Store®. All Rights Reserved.
4.h. grab the led pin on the power adapter and plug it into the pin receiver on the side of the
back panel. Plug the other end of the power adapter into any socket within the range of "
110V - 230V. !
Note: A socket pin converter may be included in your package based on your delivery location
Congratulations! You have now completed the mandir assembly."
For any questions, comments or suggestions, email us at [email protected]!