
Thank you for purchasing a
THERABAND VECTOR. The
THERABAND VECTOR is shipped
fully assembled and ready to use.
Simply remove the THERABAND
VECTOR and all accessories from
the packaging and dispose of the
packaging in a proper manner.
Accessories provided with the
THERABAND VECTOR will depend
on the particular SKU purchased.
QUICK START GUIDE |2
Attach the THERABAND VECTOR to an
appropriate anchor point via the carabiner
loop using the carabiner provided by
TheraBand.
WARNING
• THERABAND VECTOR must be attached to
an anchor point that is capable of resisting
loads of at least 91 Kg.
• Connect the THERABAND VECTOR to an
anchor point using only carabiners load
rated for at least 12Kn or those supplied by
TheraBand. TheraBand assumes no liability
for damage or injury caused by carabiners
supplied by any third party.
Attach the Kayezen certified accessory for
the exercise being performed to the Swivel
Loop at the top of the cap assembly. This will
usually be a handle to allow gripping with the
hand, but may be performed with a variety of
accessories such as the Kayezen Long Torso
Strap to allow resistance to be applied to
various points on the body.