Thermador Professional Pro Harmony PRG366GH User instructions

THERMADOR EXCLUSIVE
Page 1 of 5 09 / 15
TECHNICAL DETAILS
Circuit Breaker (A) 15 A
Volts (V) 120 V
Frequency (Hz) 60 Hz
Plug Type 120V-3 Prong
Power Cord Length (in) 72"
Energy Source Gas
Gas Type Natural Gas 15 mbar
(USA)
Alternative Gas Type Liquid Gas 27.5 mbar
(USA)
SEE PAGE 2 FOR OPTIONAL ACCESSORIES
PRG366GH
36-INCH GAS PRO HARMONY®RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
Also Available:
PRL366GH - LP
FEATURES & BENEFITS
- Exclusive, patented Star®Burner–most even heating,
unsurpassed ame coverage
- QuickClean Base®designed for easy surface cleaning
- Precision simmering capabilities as low as 100°F (375 BTU)
with 2 ExtraLow®Simmer burners
- Professional style, continuous cast iron grates
- Truly Flush Mounted™, 24" standard cabinet depth
GENERAL PROPERTIES
Oven Capacity 5.0 cu. ft.
Cooking Modes - Main / Large Cavity
Bake, Convection Bake, Broil, Extended Bake
Cooking Modes - Small Cavity N/A
Programs Sabbath Function
Cleaning Type N/A
Type of Grate Continuous Cast Iron
Controls Metal Knobs
Sealed Burners Yes
OVEN PERFORMANCE
Bake Power 27,000 BTU (NG)
Broil Power 20,000 BTU (NG)
Convection Power N/A
BURNER PERFORMANCE
Total Number of Cooktop Burners 6
Power of Front Left Burner BTU 18,000 and XLO (NG)
Power of Back Left Burner BTU 18,000 and XLO (NG)
Power of Back Center Burner BTU 18,000 (NG)
Power of Front Center Burner BTU 18,000 (NG)
Power of Center 12" Electric Griddle (W) N/A
Power of Center 12" Electric Grill (W) N/A
Power of Far Right 12" Electric Griddle (W) N/A
Power of Back Right Burner BTU 18,000 (NG)
Power of Front Right Burner BTU 18,000 (NG)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (HxWxD) (in) 35 7/8"–36 3/4" x
35 15/16" x 24 3/4"
Required Cutout Size (HxWxD) (in) 35 7/8"–36 3/4" x 36"
x 24"
Adjustable Range Height (in.) 7/8"
Net Weight (lbs) 419 lbs
ACCESSORIES (INCLUDED)
1 X Island Trim, 3 X Full Access Telescopic Racks, 1 X Broiler Pan
WARRANTY
Limited Warranty, Entire Appliance,
Parts and Labor
2 Year

Page 2 of 5 09 / 15
ACCESSORIES (OPTIONAL)
PRG366GH
36-INCH GAS PRO HARMONY®RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
PA12CHPBLK
12" Cutting Board
PWOKRINGHC
Wok Ring
PA36GLBH
9" Low Backguard
PAKNOBLUNH
Blue Knob Pro Harmony Kit
PAGRIDDLE
Griddle
36-INCH RANGE DIMENSIONS 36-INCH RANGE CUTOUT DIMENSIONS

Page 3 of 5 09 / 15
PRG366GH
36-INCH GAS PRO HARMONY®RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
as dened in the “National Fuel Gas Code”(ANSI Z223.1,
Current Edition). Clearances from non-combustible materials
are not part of the ANSI Z21.1 scope and are not certied by
CSA. Clearances of less than 12”(305 mm) must be approved
by the local codes and/or by the local authority having
jurisdiction.
as dened in the “National Fuel Gas Code” (ANSI Z223.1,
Current Edition). Clearances from non-combustiblematerials
are not part of the ANSI Z21.1 scope and are not certied by
CSA. Clearances of less than 12”(305 mm) must be approved
by the local codes and/or by the local authority having
jurisdiction.
36-INCH RANGE CUTOUT DIMENSIONS

Page 4 of 5 09 / 15
PRG366GH
36-INCH GAS PRO HARMONY®RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than 1/4inch of a
ame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
Combustible
Materials
28" (711 mm)
27¼" (692 mm)
36" (914 mm) min.
to combustible
materials
24" (610 mm)
max. recess depth Combustible
Back Wall
35
7/8
" (911 mm)Min.
36 ¾" (933 mm) Max.
23" (584 mm)
447/8 " (1140 mm)
Total Clearance
9" (229 mm)
9" (229 mm)
Low Back
24
5/8
" (625 mm)
24¾" (629 mm)
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.

Page 5 of 5 09 / 15
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
PRG366GH
36-INCH GAS PRO HARMONY®RANGE
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “FLUSH ISLAND TRIM”
Combustible
Materials
28" (711 mm)
27¼" (692 mm)
36" (914 mm) min.
to combustible
materials
24" (610 mm)
max. recess depth
Cantilever
23" (584 mm)
" (1140 mm)
Total Clearance
24¾" (629 mm) If an inner wall
is used under
the cantilever counter
top, there should be a
1/8
" (3 mm) gap from
the rear of the range
to the inner wall.
12" (305 mm) min. to
combustible surface
with Flush Island Trim
12" (305 mm) min. to
combustible surface
with Flush Island Trim
For Flush IslandFor Flush Island
Trim installations,
Trim installations,
counter surface should
counter surface should
have a cantilever edge
have a cantilever edge
meeting the back
meeting the back
section of the Flush
section of the Flush
Island Trim accessory.
Island Trim accessory.
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
Shaded area behind
range indicates
minimum clearance
to combustible surfaces,
combustible materials
cannot be located within
this area.
35
7/8
" (911 mm)Min.
36 ¾" (933 mm)Max.
447/8
24
5/8
" (625 mm)
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 12" (305 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.