Thermia Atlas Parts list manual

Technical description
Atlas & Calibra
www.thermia.com

Thermia AB is not liable or bound by warranty if these instructions
are not adhered to during installation or service.
The English language is used for the original instructions.
Other languages are a translation of the original instructions.
(Directive 2006/42/EC)
© Copyright Thermia AB

Table of Contents
1 Transportation, space requirement and Recommended location ................................ 4
1.1 Transportation ............................................................... 4
1.2 Space requirement and recommended location ......................................... 5
2Heat pump data, dimensions and connections ............................................ 7
2.1 Atlas and Calibra .............................................................. 7
2.2 Atlas Duo and Calibra Duo ....................................................... 8
2.3 Envelope for Atlas and Calibra ..................................................... 9
3Atlas 12 400V & 230V .............................................................. 11
3.1 Technical data, Atlas 12 ......................................................... 11
3.2 Estimated flow and pressure for brine for Atlas 12 ........................................ 12
3.3 Estimated flow and pressure for heating circuit, Atlas 12 .................................... 13
3.4 Supply line temp 35° and 55°C for Atlas 12 and Atlas Duo 12 ................................. 15
4 Atlas 18 400V ................................................................... 17
4.1 Technical data, Atlas 18 ......................................................... 17
4.2 Estimated flow and pressure for brine for Atlas 18 ........................................ 18
4.3 Estimated flow and pressure for heating circuit, Atlas 18 .................................... 19
4.4 Supply line temp 35° and 55°C for Atlas 18 and Atlas Duo 18 ................................. 20
5 Calibra 7 400V & 230V ............................................................. 22
5.1 Technical data, Calibra 7 ......................................................... 22
5.2 Estimated flow and pressure for brine, Calibra 7 and Calibra Duo 7 ............................. 24
5.3 Estimated flow and pressure for heating circuit, Calibra 7 and Calibra Duo 7 ....................... 25
5.4 Supply line temp 35°C and 55°C for Calibra 7, Calibra Duo 7 .................................. 26
6 Calibra 12 400V & 230V ............................................................ 28
6.1 Technical data, Calibra 12 ........................................................ 28
6.2 Estimated flow and pressure for brine, Calibra 12 and Calibra Duo 12 ........................... 29
6.3 Estimated flow and pressure for heating circuit, Calibra 12 and Calibra Duo 12 ..................... 30
6.4 Supply line temp 35° and 55°C for Calibra12 and Calibra Duo 12 ............................... 32
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 3

1 Transportation, space requirement and Recommended location
1.1 Transportation
The heat pump must not be transported lying down!
Max 45
Maximum tilt 45 °
Atlas & Calibra Atlas Duo & Calibra Duo
145-199kg!
115-159kg!
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
4

1.2 Space requirement and recommended location
Avoid placing the heat pump in a corner or near a bedroom. The surrounding
walls can amplify the sound from the heat pump.
1930 mm 1550 mm
0°C
OK
40°C
300 mm
300 mm
300 mm
10 mm
600 mm
x4
1
2
3
Adjust the heat pump using the adjustable feet so that it is horizontal on the
ground.
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 5

When the heat pump is in position, remove the transport safety. (If the heat
pump should be moved further, put back the transport safety screw.) Make
sure all parts of the transport safety is removed!
The heat pump should be placed on a stable floor with a floor well (so any condensation may drain from the condensation hole in the
bottom of the heat pump), preferably a concrete floor. When placed on a wooden floor, the floor should be reinforced to hold the
weight of the heat pump, including a filled water heater. Consider that condensation water may drip from the drain hole, so take the
necessary steps to protect the floor.
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
6

2 Heat pump data, dimensions and connections
2.1 Atlas and Calibra
1864 (±10)
1770
455
598
703
40 ±10
686
726
75
498
272 55
85
3
5
1
9
2
8
4
600
526
449
445
148
240
350
455 523
710
64
93
343
493
67
48 49
40
53
1 Brine in, 28 mm (left or right)
2 Brine out, 28 mm (left or right)
3 Heating system supply pipe, 28 mm
4 Heating system return pipe, 28 mm
5 Connection for bleed valve, 28 mm
6 Hot water line, 22 mm
7 Cold water line, 22 mm
8 Lead-in for supply, sensor and communication ca-
bles
9 Top hood, Atlas (accessory for Calibra)
The brine lines (1) and (2) can be connected on either the
left or right-hand sides or to the two knock out holes on
the top.
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 7

2.2 Atlas Duo and Calibra Duo
455
598
40 ±10
1450 (±10)
1360
686
701
75
726
498
85
3
5
6
4
600
526
449
445
148
240
350
455 523
710
64
92
343
493
1
2
48 40 53 40
7
1 Brine in, 28 mm (left or right)
2 Brine out, 28 mm (left or right)
3 Heating system supply pipe, 28 mm
4 Heating system return pipe, 28 mm
5 Connection for bleed valve, 28 mm
6 Lead-in for supply, sensor and communication
cables
7 Top hood, Atlas (accessory for Calibra)
The brine lines (1) and (2) can be connected on either
the
left or right-hand side or to the two knock out holes on
the top.
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
8

2.3 Envelope for Atlas and Calibra
Calibra 7
Calibra12
Atlas 12
R410A
T brine °C T water °C
20 63
10 65
5 65
0 65
-5 65
-10 60
-10 20
5 20
20 30
20 63
-15 -10 -5 0 5 10 15 20 25
T water
°C
T brine
°
C
70
60
50
40
30
20
10
0
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 9

Atlas 18
R410A
T brine °C T water °C
20 63
15 65
5 65
0 65
-5 65
-10 63
-10 20
5 20
20 30
20 63
-15 -10 -5 0 5 10 15 20 25
T water
°C
T brine
°
C
70
60
50
40
30
10
0
20
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
10

3 Atlas 12 400V & 230V
3.1 Technical data, Atlas 12
Atlas 12 400V and 230V Unit 3-12 kW
Refrigerant Type R410A
Amount 1kg 1,40
GWP 2088
CO2equivalent tons 2923
Design pressure Bar (g) 45
Compressor Type Scroll
Oil POE
Electrical data, 400V, 3-N Mains power supply Volt 400~3N
Max working power, compressor kW 4,3
Rated power, circulation pumps kW 0,2
Immersion heater, 3 steps kW 0/3/6/9
Fuses, combined2A (10)/16/20/25
Electrical data, 230V, 3-P Mains power supply Volt 230~3
Max working power, compressor kW 4,3
Rated power, circulation pumps kW 0,2
Immersion heater, 3 steps kW 0/3/5/8
Fuses, combined2 A (25)/32/32/40
Fuse separate supply (compressor only) A 25
Fuse separate supply, Immersion heater only A 16/25/40
Electrical data, 230V, 1-N Mains power supply Volt 230~1N
Max working power, compressor kW 4,3
Rated power, circulation pumps kW 0,2
Immersion heater, 3 steps kW 0/3/5/8
Fuses, combined2 A (25)/40/50/63
Fuse separate supply (compressor only) A 25
Fuse separate supply, Immersion heater only A 16/25/40
Performance SCOP, floor heating (35°C) 35,86
SCOP, radiator heating (55°C) 34,39
COP 44,75
Energy class-system5 Floor heating (35°C) A+++
Radiator heating (55°C) A+++
Energy class-product 6Floor heating (35°C) A+++
Radiator heating (55°C) A+++
Hot water (Economy) 7A+
Hot water (Normal/Comfort) 8A
Min/Max temperature Brine °C 20/-10
Heating °C 65/20
Anti freeze type 9 Ethanol + water solution -17°C ± 2
Pressure limits refrigerant
circuit Low pressure bar(g) 2,3
Operating pressure bar(g) 41,5
High pressure bar(g) 45,0
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 11

Sound power level Atlas dB(A) 30-43 10 (33) 11
Atlas Duo dB(A) 31-45 10 (34) 11
Hot water performance Volume 40°C hot water 12 I 307
COP, hot water 73,07
Hot water including HGW 13 I 488
Hot water tank, size Atlas I 184
Atlas Duo I Optional
Water mains bar(g) 9
Weight Atlas, empty kg 177
Atlas, filled kg 367
Atlas Duo kg 127
Dimensions (WxDxH) Atlas mm 598x703x1863 +/-10
Atlas Duo mm 598x703x1450 +/-10
1) The refrigerant circuit is hermetically sealed and contains refrigerants covered by the F-gas regulation. GWP for R410A according to EC 517/2014 is 2088, which gives a CO2 equivalent corre-
sponding to Atlas 12: 2.923 tons, Atlas 18: 4.072 tons.
2) The minimum recommended fuse size depends on the limitation of the electrical immersion heater in combination with the compressor. The maximum permissible power for immersion
heater can also be set differently with and without compressor for further adjustment at low fuses. 400V versions: The power supply and the frequency converter for the compressor are pow-
ered by L1, L2 and L3. Control and circulation pumps are operated with L1. Meets IEC61000-3-12 at Ssc connection point <1.3 MVA for Atlas 12 and for Atlas 18 <2.1 MVA without action 230V
versions: The feeding for auxilliary heater and compressor can be physically separated.
3) SCOP according to EN14825, cold climate (Helsinki), P-design Atlas 12: 10.5 kW (B0W55), 11.5 kW (B0W35). P-design Atlas 18: 15.7 kW (B0W55), 15.1 kW (B0W35).
4) At B0 / W35, according to EN14511
5) When the heat pump is installed in a heating system that is controlled via the heat pump's control computer. According to EU regulation 811/2013.
6) When the heat pump is not connected to a heating system, and the function of the built-in control computer is not taken into account. According to EU regulation 811/2013.
7) Hot water performance according to EN16147, COP according to XL cycle with the control computer set for Economy mode and built-in hot water tank.
8) Hot water performance according to EN16147, COP according to XL cycle with the control computer set for Normal / Comfort mode and built-in processor.
9) Local regulations and regulations must always be checked before antifreeze agents are used.
10) Sound power level measured according to EN12102 and EN 3741 (min / max B0W35).
11) Sound power level according to energy labeling, measured according to EN12102 and EN3741 (B0W55).
12) Hot water performance according to EN16147, V40 according to XL cycle with the control computer set for comfort mode and built-in hot water tank.
13) Maximum available amount of hot water when the boiler has been able to fully charge using HGW operation and subsequent V40 discharge in accordance with EN16147
3.2 Estimated flow and pressure for brine for Atlas 12
Flow brine and external available pressure B0W35 ( Δt 3 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
0,70
0,80
2 3 4 5 6 7 8 9 10 11 12
l/s
kW
Flow l/s
0
20
40
60
80
100
120
2 3 4 5 6 7 8 9 10 11 12
kPa
kW
Available
pressure kPa
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
12

Flow brine and external available pressure B0W55 ( Δt 3 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
0,70
3 4 5 6 7 8 9 10 11 12
l/s
kW
Flow l/s
0
20
40
60
80
100
120
3 4 5 6 7 8 9 10 11 12
kPa
kW
Available
pressure kPa
3.3 Estimated flow and pressure for heating circuit, Atlas 12
Flow heating circuit and external available pressure B0W35 ( Δt 5 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
1 2 3 4 5 6 7 8 9 10 11 12
l/s
kW
Flow l/s
l/s
0
10
20
30
40
50
60
70
80
1 2 3 4 5 6 7 8 9 10 11 12
kPa
kW
Available
pressure kPa
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 13

Flow heating circuit and external available pressure B0W55 ( Δt 8 )
0,00
0,05
0,10
0,15
0,20
0,25
0,30
0,35
3 4 5 6 7 8 9 10 11 12
l/s
kW
Flow l/s
0
10
20
30
40
50
60
70
80
3 4 5 6 7 8 9 10 11 12
kPa
kW
Available
pressure kPa
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
14

3.4 Supply line temp 35° and 55°C for Atlas 12 and Atlas Duo 12
Heating capacity with a desired supply line temperature at 35°C at different compressor speed and brine temperature. At higher brine
temperatures max compressor speed may be automatically reduced to below 5300 max RPM
0,00
2,00
4,00
6,00
8,00
10,00
12,00
14,00
-5 0 5
W35
1200 rpm
2100 rpm
3200 rpm
4500 rpm
5300 rpm
kW
Heating capacity
°C Brine temp.
RPM Brine temp. -5 0 +5
1200 Heating capacity (kW) 2,3 2,7 3,0
Input power (kW) 0,7 0,7 0,7
COP 3,5 4,1 4,6
2100 Heating capacity (kW) 4,0 4,6 5,2
Input power (kW) 1,0 1,0 1,0
COP 4,0 4,6 5,3
3200 Heating capacity (kW) 6,2 7,0 8,0
Input power (kW) 1,5 1,5 1,5
COP 4,1 4,7 5,3
4500 Heating capacity (kW) 8,7 10,0 11,2
Input power (kW) 2,2 2,2 2,2
COP 4,0 4,6 5,2
5300 Heating capacity (kW) 10,2 11,6 12,1
Input power (kW) 2,6 2,7 2,7
COP 3,9 4,4 4,6
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 15

Heating capacity with a desired supply line temperature at 55°C at different compressor speed and brine temperature. At higher brine
temperatures max compressor speed may be automatically reduced to below 5300 max RPM
0,00
2,00
4,00
6,00
8,00
10,00
12,00
14,00
-5 0 5
W55
2100 rpm
2950 rpm
3600 rpm
4500 rpm
5300 rpm
kW
Heating capacity
°C Brine temp.
RPM Brine temp. -5 0 +5
2100 Heating capacity (kW) 3,9 4,4 4,9
Input power (kW) 1,5 1,5 1,5
COP 2,6 2,9 3,2
2950 Heating capacity (kW) 5,4 6,1 6,9
Input power (kW) 2,0 2,0 2,1
COP 2,7 3,0 3,4
3600 Heating capacity (kW) 6,6 7,5 8,4
Input power (kW) 2,4 2,4 2,5
COP 2,8 3,1 3,4
4500 Heating capacity (kW) 8,0 9,1 10,3
Input power (kW) 3,0 3,1 3,1
COP 2,7 3,0 3,3
5300 Heating capacity (kW) 9,5 10,7 12,2
Input power (kW) 3,7 3,7 3,8
COP 2,6 2,9 3,2
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
16

4 Atlas 18 400V
4.1 Technical data, Atlas 18
Atlas 18 400V and 230V Unit 4-18 kW
Refrigerant Type R410A
Amount 1kg 1,95
CO2equivalent tons 4,072
Design pressure Bar (g) 45
Compressor Type Scroll
Oil POE
Electrical data, 400V, 3-N Mains power supply Volt 400~3N
Max working power, compressor kW 6,7
Rated power, circulation pumps kW 0,3
Immersion heater, 3 steps kW (0)/3/6/9
Fuses, combined2A (13)/20/25/32
Performance SCOP, floor heating (35°C) 36,15
SCOP, radiator heating (55°C) 34,55
COP 44,98
Energy class-system5 Floor heating (35°C) A+++
Radiator heating (55°C) A+++
Energy class-product 6Floor heating (35°C) A+++
Radiator heating (55°C) A+++
Hot water (Economy) 7A+
Hot water (Normal/Comfort) 8A
Min/Max temperature Brine °C 20/-10
Heating °C 65/20
Anti freeze type 9 Ethanol + water solution -17°C ± 2
Pressure limits refrigerant
circuit Low pressure bar(g) 2,3
Operating pressure bar(g) 41,5
High pressure bar(g) 45,0
Sound power level Atlas dB(A) 32-45 10 (36) 11
Atlas Duo dB(A) 33-46 10 (37) 11
Hot water performance Volume 40°C hot water 12 I 344
COP, hot water 73,05
Hot water including HGW 13 I 545
Hot water tank, size Atlas I 184
Atlas Duo I Optional
Water mains bar(g) 9
Weight Atlas, empty kg 187
Atlas, filled kg 377
Atlas Duo kg 147
Dimensions (WxDxH) Atlas mm 598x703x1863 +/-10
Atlas Duo mm 598x703x1450 +/-10
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 17

1) The refrigerant circuit is hermetically sealed and contains refrigerants covered by the F-gas regulation. GWP for R410A according to EC 517/2014 is 2088, which gives a CO2 equivalent corre-
sponding to Atlas 12: 2.923 tons, Atlas 18: 4.072 tons.
2) The minimum recommended fuse size depends on the limitation of the electrical immersion heater in combination with the compressor. The maximum permissible power for immersion
heater can also be set differently with and without compressor for further adjustment at low fuses. 400V versions: The power supply and the frequency converter for the compressor are pow-
ered by L1, L2 and L3. Control and circulation pumps are operated with L1. Meets IEC61000-3-12 at Ssc connection point <1.3 MVA for Atlas 12 and for Atlas 18 <2.1 MVA without action 230V
versions: The feeding for auxilliary heater and compressor can be physically separated.
3) SCOP according to EN14825, cold climate (Helsinki), P-design Atlas 12: 10.5 kW (B0W55), 11.5 kW (B0W35). P-design Atlas 18: 15.7 kW (B0W55), 15.1 kW (B0W35).
4) At B0 / W35, according to EN14511
5) When the heat pump is installed in a heating system that is controlled via the heat pump's control computer. According to EU regulation 811/2013.
6) When the heat pump is not connected to a heating system, and the function of the built-in control computer is not taken into account. According to EU regulation 811/2013.
7) Hot water performance according to EN16147, COP according to XL cycle with the control computer set for Economy mode and built-in hot water tank.
8) Hot water performance according to EN16147, COP according to XL cycle with the control computer set for Normal / Comfort mode and built-in processor.
9) Local regulations and regulations must always be checked before antifreeze agents are used.
10) Sound power level measured according to EN12102 and EN 3741 (min / max B0W35).
11) Sound power level according to energy labeling, measured according to EN12102 and EN3741 (B0W55).
12) Hot water performance according to EN16147, V40 according to XL cycle with the control computer set for comfort mode and built-in hot water tank.
13) Maximum available amount of hot water when the boiler has been able to fully charge using HGW operation and subsequent V40 discharge in accordance with EN16147
4.2 Estimated flow and pressure for brine for Atlas 18
Flow brine and external available pressure B0W35 ( Δt 3 )
0,00
0,20
0,40
0,60
0,80
1,00
1,20
4 6 8 10 12 14 16 18
l/s
kW
Flow l/s
0
10
20
30
40
50
60
70
80
90
100
110
120
4 6 8 10 12 14 16 18
kPa
kW
Available
pressure kPa
Flow brine and external available pressure B0W55 ( Δt 3 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
0,70
0,80
0,90
1,00
6 8 10 12 14 16
l/s
kW
Flow l/s
0
20
40
60
80
100
120
6 8 10 12 14 16
kPa
kW
Available
pressure kPa
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
18

4.3 Estimated flow and pressure for heating circuit, Atlas 18
Flow heating circuit and external available pressure B0W35 ( Δt 5 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
0,70
0,80
0,90
1,00
4 6 8 10 12 14 16 18
l/s
kW
Flow l/s
0
10
20
30
40
50
60
70
80
90
100
4 6 8 10 12 14 16 18
kPa
kW
Available
pressure kPa
Flow heating circuit and external available pressure B0W55 ( Δt 8 )
0,00
0,10
0,20
0,30
0,40
0,50
0,60
6 8 10 12 14 16
l/s
kW
system
Flow l/s
0
10
20
30
40
50
60
70
80
90
6 8 10 12 14 16
kPa
kW
high temp system
Available
pressure kPa
Technical description Atlas & Calibra
Thermia AB BWCA01TD0202 19

4.4 Supply line temp 35° and 55°C for Atlas 18 and Atlas Duo 18
Heating capacity with a desired supply line temperature at 55° at different compressor speed and brine temperatures.
0,00
2,00
4,00
6,00
8,00
10,00
12,00
14,00
16,00
18,00
20,00
-5 0 5
kW
°C
W55
2100 rpm
2850 rpm
3500 rpm
4350 rpm
5300 rpm
RPM Brine temp. -5 0 +5
2110 Heating capacity (kW) 5,6 6,4 7,3
Input power (kW) 2,2 2,2 2,2
COP 2,6 2,9 3,3
2850 Heating capacity (kW) 7,4 8,6 9,8
Input power (kW) 2,8 2,8 2,9
COP 2,7 3,0 3,4
3500 Heating capacity (kW) 9,1 10,5 12,1
Input power (kW) 3,3 3,4 3,5
COP 2,7 3,1 3,4
4350 Heating capacity (kW) 11,3 13,1 15,1
Input power (kW) 4,2 4,3 4,5
COP 2,7 3,0 3,4
5300 Heating capacity (kW) 14,0 16,1 18,6
Input power (kW) 5,2 5,4 5,6
COP 2,7 3,0 3,3
Technical description Atlas & Calibra
BWCA01TD0202 Thermia AB
20