ThermoPro Prize Putt User manual

Prize Putt
Assembly Guide
www.thermopro.com Proudly Made in the USA by
Product Parts:
Foot (A)
Support (B) Stand (C)
Action Field (D)
Ramp Side (E)
Astroturf Putter 3 Golf Balls

www.thermopro.com Proudly Made in the USA by
Hardware Assembly:
Step 1
Assemble the Support (B) and Stand (C) as illustrated below. Once pieces are
connected, attach Foot (A) to other end of Support (B). Example 1 shows
Bottom Supports fully assembled.
Example 1
Step 2
Align tabs of assembled Bottom Supports with slots on underside of Action Field
(D). Repeat this for the Ramp Side (E). The Action Field and Ramp Side will connect
to each other with the hook and loop pre-installed along edge of each side.
Step 3
Attach Turf to Ramp (E) with hook and loop pre-installed along bottom of Turf and
bottom of Ramp.

www.thermopro.com Proudly Made in the USA by
Storage:
Place all product parts into optional Carry Case (Sold Separately) Insert Action
Field (D) rounded corner first into largest opening. Insert Ramp Side (E) into
smaller opening with rounded corner first. Putter , Balls, Turf and Bottom Supports
(B, C and A) will fit in either opening.
Care:
Clean hardware with damp cloth and wipe dry.
Clean graphics with dry cloth.